App-perlbrew v0.95 Perl 5 v5.14.4 i86pc-solaris-thread-multi-64
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
App-perlbrew v0.95
- Platform
- Perl 5 v5.14.4 i86pc-solaris-thread-multi-64
- Date
- 2022-07-06 12:48:10
- ID
- e3ddd40e-fd29-11ec-8f4e-c962458f5e5b
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Liu Kang Min,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
t/00.load.t ............................ ok
t/01.options.t ......................... ok
t/02.format_perl_version.t ............. ok
t/03.test_get_available_versions.t ..... ok
t/04.find_available_perls.t ............ ok
t/05.get_current_perl.t ................ ok
t/06.installed_perls.t ................. skipped: No perl installation under PERLBREW_ROOT
t/07.argv.t ............................ ok
t/08.error_available.t ................. ok
t/08.error_install.t ................... ok
t/08.error_install_blead.t ............. ok
t/08.error_install_cpanm.t ............. ok
t/09.exit_status.t ..................... ok
t/10.resolve.t ......................... ok
t/11.editdist.t ........................ ok
t/11.root_from_arg.t ................... ok
t/12.destdir.t ......................... ok
t/12.sitecustomize.t ................... ok
t/13.perl_release.t .................... ok
t/14.perl_version_parsing.t ............ ok
# /tmp/eZczOWO68o/build/test/test
t/15.no-reuse-build-dir.t .............. ok
t/16.release-detail.t .................. ok
t/17.release-detail-cperl-local.t ...... ok
t/17.release-detail-cperl-remote.t ..... skipped: These tests send HTTP requests. Set env TEST_LIVE=1 to really run them.
t/18.release-detail-perl-local.t ....... ok
t/18.release-detail-perl-remote.t ...... skipped: These tests send HTTP requests. Set env TEST_LIVE=1 to really run them.
t/app-perlbrew-path-installation.t ..... ok
t/app-perlbrew-path.t .................. ok
t/bashrc_content.t ..................... ok
t/builddir.t ........................... ok
t/command-alias.t ...................... ok
t/command-available.t .................. ok
t/command-clone-modules.t .............. ok
t/command-compgen.t .................... ok
t/command-display-rc.t ................. ok
Attempting to create directory /tmp/fB8nJG9xaf/libs/perl-5.14.1@nobita
t/command-env.t ........................ ok
sort (...) interpreted as function at t/command-exec.t line 283.
sort (...) interpreted as function at t/command-exec.t line 305.
Command [perl -E 'somesub 42'] terminated with exit code 7 ($? = 1792) under the following perl environment:
format_info_output_value
Command [perl -E 'say 42'] terminated with exit code 3 ($? = 768) under the following perl environment:
Command [perl -E 'say 42'] terminated with exit code 3 ($? = 768) under the following perl environment:
Command [perl -E 'say 42'] terminated with exit code 3 ($? = 768) under the following perl environment:
Command [perl -E 'say 42'] terminated with exit code 255 ($? = -1) under the following perl environment:
Command [perl -E 'say 42'] terminated with exit code 7 ($? = 1792) under the following perl environment:
t/command-exec.t ....................... ok
t/command-help.t ....................... ok
t/command-info.t ....................... ok
t/command-install-cpanm.t .............. ok
t/command-install-from-archive.t ....... ok
t/command-install-patchperl.t .......... ok
t/command-install.t .................... ok
t/command-lib.t ........................ ok
t/command-list.t ....................... ok
t/current_perl.t ....................... ok
t/current_shell.t ...................... ok
t/do_system.t .......................... ok
t/failure-command-install-cpanm.t ...... ok
t/failure-command-install-patchperl.t .. ok
t/home.t ............................... ok
t/http-program-control.t ............... ok
# PATH=/home/cpan/pit/thr/conf/perl-5.14.4/.cpanplus/5.14.4/build/th6YMqlEs1/App-perlbrew-0.95/t/fake-bin:/home/cpan/pit/thr/conf/perl-5.14.4/.cpanplus/5.14.4/build/th6YMqlEs1/App-perlbrew-0.95/blib/script:/usr/bin:/usr/sbin:/sbin:/opt/ooce/bin:/usr/gnu/bin
# curl = /home/cpan/pit/thr/conf/perl-5.14.4/.cpanplus/5.14.4/build/th6YMqlEs1/App-perlbrew-0.95/t/fake-bin/curl
t/http-ua-detect-non-curl.t ............ ok
t/http-ua-detect.t ..................... ok
t/http.t ............................... skipped: (no reason given)
t/installation-perlbrew.t .............. ok
t/installation.t ....................... ok
t/installation2.t ...................... ok
t/installation3.t ...................... ok
t/list_modules.t ....................... ok
t/unit-files-are-the-same.t ............ ok
All tests successful.
Files=61, Tests=418, 24 wallclock secs ( 0.43 usr 0.25 sys + 18.36 cusr 4.10 csys = 23.14 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
CPAN::Perl::Releases 5.20220620 5.20220313
Capture::Tiny 0.48 0.48
Devel::PatchPerl 2.08 2.08
ExtUtils::MakeMaker 7.64 7.22
File::Copy 2.21 0
File::Temp 0.2311 0.2304
File::Which 1.27 1.21
IO::All 0.87 0.51
JSON::PP 4.05 0
Path::Class 0.37 0.33
Pod::Parser 1.65 1.63
Pod::Usage 2.03 1.68
Test::Exception 0.43 0.32
Test::More 1.302190 1.001002
Test::NoWarnings 1.06 1.04
Test::Output 1.033 1.03
Test::Simple 1.302190 1.001002
Test::Spec 0.54 0.49
Test::TempDir::Tiny 0.018 0.016
local::lib 2.000029 2.000014
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.64
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.64
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.44
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.65
Pod::Simple 3.43
Test2 1.302190
Test::Harness 3.44
Test::More 1.302190
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/thr/conf/perl-5.14.4/.cpanplus/5.14.4/build/th6YMqlEs1/App-perlbrew-0.95/blib/script:/usr/bin:/usr/sbin:/sbin:/opt/ooce/bin:/usr/gnu/bin
PERL5LIB = /home/cpan/pit/jail/bDe7axnqpR/lib/perl5:/home/cpan/pit/thr/conf/perl-5.14.4/.cpanplus/5.14.4/build/th6YMqlEs1/App-perlbrew-0.95/blib/lib:/home/cpan/pit/thr/conf/perl-5.14.4/.cpanplus/5.14.4/build/th6YMqlEs1/App-perlbrew-0.95/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 4398
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.14.4
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/bDe7axnqpR
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/bDe7axnqpR"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/bDe7axnqpR
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.14.4/bin/perl
UID: $< = 101
EUID: $> = 101
GID: $( = 101 101
EGID: $) = 101 101
-------------------------------
--
Summary of my perl5 (revision 5 version 14 subversion 4) configuration:
Platform:
osname=solaris, osvers=2.11, archname=i86pc-solaris-thread-multi-64
uname='sunos ouzel 5.11 omnios-r151034-0d278a0cc5 i86pc i386 i86pc '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.14.4 -Dusethreads -Duse64bitall -Dcc=gcc'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -m64 -fwrapv -fno-strict-aliasing -pipe -fstack-protector -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV',
optimize='-O',
cppflags='-D_REENTRANT -m64 -fwrapv -fno-strict-aliasing -pipe -fstack-protector'
ccversion='', gccversion='9.3.0', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -m64 -fstack-protector -L/usr/gnu/lib '
libpth=/usr/gnu/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lpthread -lc
perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc
libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -R /home/cpan/pit/thr/perl-5.14.4/lib/5.14.4/i86pc-solaris-thread-multi-64/CORE'
cccdlflags='-fPIC', lddlflags=' -shared -m64 -L/usr/gnu/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_USE_SAFE_PUTENV
USE_64_BIT_ALL USE_64_BIT_INT USE_ITHREADS
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 2.00
Built under solaris
Compiled at Aug 20 2020 01:01:37
%ENV:
PERL5LIB="/home/cpan/pit/jail/bDe7axnqpR/lib/perl5:/home/cpan/pit/thr/conf/perl-5.14.4/.cpanplus/5.14.4/build/th6YMqlEs1/App-perlbrew-0.95/blib/lib:/home/cpan/pit/thr/conf/perl-5.14.4/.cpanplus/5.14.4/build/th6YMqlEs1/App-perlbrew-0.95/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="4398"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.14.4"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/bDe7axnqpR"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/bDe7axnqpR""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/bDe7axnqpR"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/cpan/pit/jail/bDe7axnqpR/lib/perl5/5.14.4/i86pc-solaris-thread-multi-64
/home/cpan/pit/jail/bDe7axnqpR/lib/perl5/5.14.4
/home/cpan/pit/jail/bDe7axnqpR/lib/perl5/i86pc-solaris-thread-multi-64
/home/cpan/pit/jail/bDe7axnqpR/lib/perl5
/home/cpan/pit/thr/conf/perl-5.14.4/.cpanplus/5.14.4/build/th6YMqlEs1/App-perlbrew-0.95/blib/lib
/home/cpan/pit/thr/conf/perl-5.14.4/.cpanplus/5.14.4/build/th6YMqlEs1/App-perlbrew-0.95/blib/arch
/home/cpan/pit/thr/perl-5.14.4/lib/site_perl/5.14.4/i86pc-solaris-thread-multi-64
/home/cpan/pit/thr/perl-5.14.4/lib/site_perl/5.14.4
/home/cpan/pit/thr/perl-5.14.4/lib/5.14.4/i86pc-solaris-thread-multi-64
/home/cpan/pit/thr/perl-5.14.4/lib/5.14.4
.