Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL TAP-Formatter-Bamboo-0.04 v5.14.2 GNU/Linux
Date: 2016-04-28T09:51:50Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Bartlomiej Fulanty,
This is a computer-generated report for TAP-Formatter-Bamboo-0.04
on perl 5.14.2, created by CPAN-Reporter-1.2017.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/home/sand/src/perl/repoperls/installed-perls/perl/v5.14.2/109d/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.t .... ok
# Failed test 't/internal_tests/bad_chars.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/bad_chars.test" errors="0" failures="0" tests="3">
# <system-out/>
# <testcase name="t/internal_tests/bad_chars.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/bad_chars.results
# Failed test 't/internal_tests/descriptive.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/descriptive.test" errors="0" failures="0" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/descriptive.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/descriptive.results
# Failed test 't/internal_tests/descriptive_trailing.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/descriptive_trailing.test" errors="0" failures="0" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/descriptive_trailing.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/descriptive_trailing.results
# Failed test 't/internal_tests/die.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/die.test" errors="1" failures="0" tests="0">
# <system-out/>
# <testcase name="t/internal_tests/die.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# parse errors (No plan found in TAP output)
# Test output:
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/die.results
# Failed test 't/internal_tests/die_head_end.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/die_head_end.test" errors="1" failures="0" tests="4">
# <system-out/>
# <testcase name="t/internal_tests/die_head_end.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# parse errors (No plan found in TAP output)
# Test output:
# ok 1
# ok 2
# ok 3
# ok 4
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/die_head_end.results
# Failed test 't/internal_tests/die_last_minute.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/die_last_minute.test" errors="0" failures="0" tests="4">
# <system-out/>
# <testcase name="t/internal_tests/die_last_minute.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# non-zero exit code (1)
# Test output:
# ok 1
# ok 2
# ok 3
# ok 4
# 1..4
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/die_last_minute.results
# Failed test 't/internal_tests/die_unfinished.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/die_unfinished.test" errors="1" failures="0" tests="3">
# <system-out/>
# <testcase name="t/internal_tests/die_unfinished.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# parse errors (Bad plan. You planned 4 tests but ran 3.)
# Test output:
# 1..4
# ok 1
# ok 2
# ok 3
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/die_unfinished.results
# Failed test 't/internal_tests/empty.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/empty.test" errors="1" failures="0" tests="0">
# <system-out/>
# <testcase name="t/internal_tests/empty.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# parse errors (No plan found in TAP output)
# Test output:
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/empty.results
# Failed test 't/internal_tests/no_nums.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/no_nums.test" errors="0" failures="1" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/no_nums.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# failed tests (3)
# Test output:
# 1..5
# ok
# ok
# not ok
# ok
# ok
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/no_nums.results
# Failed test 't/internal_tests/simple.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/simple.test" errors="0" failures="0" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/simple.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/simple.results
# Failed test 't/internal_tests/simple_fail.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/simple_fail.test" errors="0" failures="2" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/simple_fail.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# failed tests (2, 5)
# Test output:
# 1..5
# ok 1
# not ok 2
# ok 3
# ok 4
# not ok 5
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/simple_fail.results
# Failed test 't/internal_tests/simple_yaml.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/simple_yaml.test" errors="0" failures="0" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/simple_yaml.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/simple_yaml.results
# Failed test 't/internal_tests/skip.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/skip.test" errors="0" failures="0" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/skip.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/skip.results
# Failed test 't/internal_tests/skip_nomsg.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/skip_nomsg.test" errors="0" failures="0" tests="1">
# <system-out/>
# <testcase name="t/internal_tests/skip_nomsg.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/skip_nomsg.results
# Failed test 't/internal_tests/skipall.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/skipall.test" errors="0" failures="0" tests="0">
# <system-out/>
# <testcase name="t/internal_tests/skipall.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/skipall.results
# Failed test 't/internal_tests/skipall_nomsg.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/skipall_nomsg.test" errors="0" failures="0" tests="0">
# <system-out/>
# <testcase name="t/internal_tests/skipall_nomsg.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/skipall_nomsg.results
# Failed test 't/internal_tests/stdout_stderr.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/stdout_stderr.test" errors="0" failures="0" tests="4">
# <system-out/>
# <testcase name="t/internal_tests/stdout_stderr.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/stdout_stderr.results
# Failed test 't/internal_tests/todo.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/todo.test" errors="0" failures="0" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/todo.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# unexpected TODO passed (2)
# Test output:
# 1..5 todo 3 2;
# ok 1
# ok 2
# not ok 3
# ok 4
# ok 5
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/todo.results
# Failed test 't/internal_tests/todo_inline.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/todo_inline.test" errors="0" failures="0" tests="3">
# <system-out/>
# <testcase name="t/internal_tests/todo_inline.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# unexpected TODO passed (2)
# Test output:
# 1..3
# not ok 1 - Foo # TODO Just testing the todo interface.
# ok 2 - Unexpected success # TODO Just testing the todo interface.
# ok 3 - This is not todo
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/todo_inline.results
# Failed test 't/internal_tests/todo_misparse.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/todo_misparse.test" errors="0" failures="1" tests="1">
# <system-out/>
# <testcase name="t/internal_tests/todo_misparse.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# failed tests (1)
# Test output:
# 1..1
# not ok 1 Hamlette # TODOORNOTTODO
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/todo_misparse.results
# Failed test 't/internal_tests/too_many.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/too_many.test" errors="1" failures="4" tests="7">
# <system-out/>
# <testcase name="t/internal_tests/too_many.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# failed tests (4, 5, 6, 7)
# parse errors (Bad plan. You planned 3 tests but ran 7.)
# Test output:
# 1..3
# ok 1
# ok 2
# ok 3
# ok 4
# ok 5
# ok 6
# ok 7
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/too_many.results
# Looks like you failed 21 tests of 21.
t/20-single.t ..
Dubious, test returned 21 (wstat 5376, 0x1500)
Failed 21/21 subtests
Test Summary Report
-------------------
t/20-single.t (Wstat: 5376 Tests: 21 Failed: 21)
Failed tests: 1-21
Non-zero exit status: 21
Files=2, Tests=22, 10 wallclock secs ( 0.04 usr 0.01 sys + 6.64 cusr 0.94 csys = 7.63 CPU)
Result: FAIL
Failed 1/2 test programs. 21/22 subtests failed.
Makefile:861: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 21
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- ------------
Encode 2.42 2.82
Moose 2 2.1705
MooseX::NonMoose 0.20 0.26
Test::Harness 3.2 3.36
XML::LibXML 2 2.0124
build_requires:
Module Need Have
------------------- ---- ------------
ExtUtils::MakeMaker 0 7.15_01
File::Slurp 0 9999.19
File::Temp 0 0.2304
Test::Harness 0 3.36
Test::More 0 1.302014_007
Test::XML 0 0.08
configure_requires:
Module Need Have
------------------- ---- ------------
ExtUtils::MakeMaker 6.64 7.15_01
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 32217
PERL5_CPAN_IS_RUNNING = 32217
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/perl/v5.14.2/109d/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- ------------
CPAN 2.10
CPAN::Meta 2.150005
Cwd 3.62
ExtUtils::CBuilder 0.280224
ExtUtils::Command 7.15_01
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.15_01
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.30
File::Spec 3.62
JSON 2.90
JSON::PP 2.27400
Module::Build 0.4218
Module::Signature 0.79
Parse::CPAN::Meta 1.4417
Test::Harness 3.36
Test::More 1.302014_007
YAML 1.15
YAML::Syck 1.29
version 0.9916
--
Summary of my perl5 (revision 5 version 14 subversion 2) configuration:
Derived from: dc281e6088d189558b79a5121119b7196c8b3db0
Platform:
osname=linux, osvers=4.3.0-1-amd64, archname=x86_64-linux-thread-multi-ld
uname='linux k83 4.3.0-1-amd64 #1 smp debian 4.3.3-7 (2016-01-19) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/v5.14.2/109d -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Duseithreads -Duselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='5.3.1 20160121', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.21.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.21'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_USE_DEVEL USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LONG_DOUBLE USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
uncommitted-changes
Devel::PatchPerl 1.40
Built under linux
Compiled at Feb 23 2016 13:41:17
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="32217"
PERL5_CPAN_IS_RUNNING="32217"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/perl/v5.14.2/109d/lib/site_perl/5.14.2/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/perl/v5.14.2/109d/lib/site_perl/5.14.2
/home/sand/src/perl/repoperls/installed-perls/perl/v5.14.2/109d/lib/5.14.2/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/perl/v5.14.2/109d/lib/5.14.2
.