Back
From: metabase:user:a0e144f2-373b-11e6-8edd-c6848980b093
Subject: FAIL TAP-Formatter-Bamboo-0.04 v5.24.1 RC4 GNU/Linux
Date: 2016-10-18T12:30:18Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Bartlomiej Fulanty,
This is a computer-generated report for TAP-Formatter-Bamboo-0.04
on perl 5.24.1, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/home/cpan4/install/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.t .... ok
# Failed test 't/internal_tests/bad_chars.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/bad_chars.test" errors="0" failures="0" tests="3">
# <system-out/>
# <testcase name="t/internal_tests/bad_chars.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/bad_chars.results
# Failed test 't/internal_tests/descriptive.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/descriptive.test" errors="0" failures="0" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/descriptive.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/descriptive.results
# Failed test 't/internal_tests/descriptive_trailing.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/descriptive_trailing.test" errors="0" failures="0" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/descriptive_trailing.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/descriptive_trailing.results
# Failed test 't/internal_tests/die.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/die.test" errors="1" failures="0" tests="0">
# <system-out/>
# <testcase name="t/internal_tests/die.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# parse errors (No plan found in TAP output)
# Test output:
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/die.results
# Failed test 't/internal_tests/die_head_end.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/die_head_end.test" errors="1" failures="0" tests="4">
# <system-out/>
# <testcase name="t/internal_tests/die_head_end.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# parse errors (No plan found in TAP output)
# Test output:
# ok 1
# ok 2
# ok 3
# ok 4
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/die_head_end.results
# Failed test 't/internal_tests/die_last_minute.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/die_last_minute.test" errors="0" failures="0" tests="4">
# <system-out/>
# <testcase name="t/internal_tests/die_last_minute.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# non-zero exit code (1)
# Test output:
# ok 1
# ok 2
# ok 3
# ok 4
# 1..4
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/die_last_minute.results
# Failed test 't/internal_tests/die_unfinished.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/die_unfinished.test" errors="1" failures="0" tests="3">
# <system-out/>
# <testcase name="t/internal_tests/die_unfinished.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# parse errors (Bad plan. You planned 4 tests but ran 3.)
# Test output:
# 1..4
# ok 1
# ok 2
# ok 3
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/die_unfinished.results
# Failed test 't/internal_tests/empty.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/empty.test" errors="1" failures="0" tests="0">
# <system-out/>
# <testcase name="t/internal_tests/empty.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# parse errors (No plan found in TAP output)
# Test output:
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/empty.results
# Failed test 't/internal_tests/no_nums.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/no_nums.test" errors="0" failures="1" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/no_nums.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# failed tests (3)
# Test output:
# 1..5
# ok
# ok
# not ok
# ok
# ok
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/no_nums.results
# Failed test 't/internal_tests/simple.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/simple.test" errors="0" failures="0" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/simple.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/simple.results
# Failed test 't/internal_tests/simple_fail.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/simple_fail.test" errors="0" failures="2" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/simple_fail.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# failed tests (2, 5)
# Test output:
# 1..5
# ok 1
# not ok 2
# ok 3
# ok 4
# not ok 5
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/simple_fail.results
# Failed test 't/internal_tests/simple_yaml.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/simple_yaml.test" errors="0" failures="0" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/simple_yaml.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/simple_yaml.results
# Failed test 't/internal_tests/skip.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/skip.test" errors="0" failures="0" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/skip.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/skip.results
# Failed test 't/internal_tests/skip_nomsg.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/skip_nomsg.test" errors="0" failures="0" tests="1">
# <system-out/>
# <testcase name="t/internal_tests/skip_nomsg.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/skip_nomsg.results
# Failed test 't/internal_tests/skipall.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/skipall.test" errors="0" failures="0" tests="0">
# <system-out/>
# <testcase name="t/internal_tests/skipall.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/skipall.results
# Failed test 't/internal_tests/skipall_nomsg.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/skipall_nomsg.test" errors="0" failures="0" tests="0">
# <system-out/>
# <testcase name="t/internal_tests/skipall_nomsg.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/skipall_nomsg.results
# Failed test 't/internal_tests/stdout_stderr.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/stdout_stderr.test" errors="0" failures="0" tests="4">
# <system-out/>
# <testcase name="t/internal_tests/stdout_stderr.test" time="TEST_TIME"/>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/stdout_stderr.results
# Failed test 't/internal_tests/todo.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/todo.test" errors="0" failures="0" tests="5">
# <system-out/>
# <testcase name="t/internal_tests/todo.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# unexpected TODO passed (2)
# Test output:
# 1..5 todo 3 2;
# ok 1
# ok 2
# not ok 3
# ok 4
# ok 5
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/todo.results
# Failed test 't/internal_tests/todo_inline.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/todo_inline.test" errors="0" failures="0" tests="3">
# <system-out/>
# <testcase name="t/internal_tests/todo_inline.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# unexpected TODO passed (2)
# Test output:
# 1..3
# not ok 1 - Foo # TODO Just testing the todo interface.
# ok 2 - Unexpected success # TODO Just testing the todo interface.
# ok 3 - This is not todo
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/todo_inline.results
# Failed test 't/internal_tests/todo_misparse.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/todo_misparse.test" errors="0" failures="1" tests="1">
# <system-out/>
# <testcase name="t/internal_tests/todo_misparse.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# failed tests (1)
# Test output:
# 1..1
# not ok 1 Hamlette # TODOORNOTTODO
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/todo_misparse.results
# Failed test 't/internal_tests/too_many.test'
# at t/20-single.t line 44.
# During compare:
# no element found at line 1, column 0, byte -1
# ---- Expected: ----
# <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
# <testsuites>
# <testsuite name="t/internal_tests/too_many.test" errors="1" failures="4" tests="7">
# <system-out/>
# <testcase name="t/internal_tests/too_many.test" time="TEST_TIME">
# <failure><![CDATA[Fail reason(s):
# failed tests (4, 5, 6, 7)
# parse errors (Bad plan. You planned 3 tests but ran 7.)
# Test output:
# 1..3
# ok 1
# ok 2
# ok 3
# ok 4
# ok 5
# ok 6
# ok 7
#
# ]]></failure>
# </testcase>
# </testsuite>
# </testsuites>
# Actual results saved to file t/internal_tests/too_many.results
# Looks like you failed 21 tests of 21.
t/20-single.t ..
Dubious, test returned 21 (wstat 5376, 0x1500)
Failed 21/21 subtests
Test Summary Report
-------------------
t/20-single.t (Wstat: 5376 Tests: 21 Failed: 21)
Failed tests: 1-21
Non-zero exit status: 21
Files=2, Tests=22, 2 wallclock secs ( 0.05 usr 0.00 sys + 1.98 cusr 0.14 csys = 2.17 CPU)
Result: FAIL
Failed 1/2 test programs. 21/22 subtests failed.
Makefile:861: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 21
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- --------
Encode 2.42 2.86
Moose 2 2.1900
MooseX::NonMoose 0.20 0.26
Test::Harness 3.2 3.36_01
XML::LibXML 2 2.0128
build_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 0 7.24
File::Slurp 0 9999.19
File::Temp 0 0.2304
Test::Harness 0 3.36_01
Test::More 0 1.302061
Test::XML 0 0.08
configure_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 6.64 7.24
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
HARNESS_OPTIONS = j5
LANG = en_US.UTF-8
PATH = /usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 26630
PERL5_CPAN_IS_RUNNING = 26630
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 31291,26630
PERLBREW_BASHRC_VERSION = 0.76
PERLBREW_HOME = /home/dcollins/.perlbrew
PERLBREW_ROOT = /home/dcollins/toolchain/perl5
PERL_CR_SMOKER_CURRENT = TAP-Formatter-Bamboo-0.04
PERL_CR_SMOKER_RUNONCE = 1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = putty
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/cpan4/install/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- ----------
CPAN 2.14
CPAN::Meta 2.150010
Cwd 3.63_01
ExtUtils::CBuilder 0.280225
ExtUtils::Command 7.24
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.24
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.31
File::Spec 3.63_01
JSON 2.90
JSON::PP 2.27300_01
Module::Build 0.4220
Module::Signature 0.81
Parse::CPAN::Meta 2.150010
Test::Harness 3.36_01
Test::More 1.302061
YAML 1.18
YAML::Syck 1.29
version 0.9917
--
Summary of my perl5 (revision 5 version 24 subversion 1) configuration:
Platform:
osname=linux, osvers=3.16.0-4-amd64, archname=x86_64-linux-thread-multi
uname='linux digitalis 3.16.0-4-amd64 #1 smp debian 3.16.36-1+deb8u1 (2016-09-03) x86_64 gnulinux '
config_args='-Dusedevel -DDEBUGGING -Dusethreads -Dprefix=/home/cpan4/install -Uversiononly -des'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2',
optimize='-O2 -g',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion='', gccversion='4.9.2', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16, longdblkind=3
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/4.9/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.19.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.19'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options: DEBUGGING HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_COPY_ON_WRITE PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_TRACK_MEMPOOL PERL_USE_DEVEL
USE_64_BIT_ALL USE_64_BIT_INT USE_ITHREADS
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_LOCALE_TIME
USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API
Locally applied patches:
RC4
Built under linux
Compiled at Oct 12 2016 18:25:36
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="26630"
PERL5_CPAN_IS_RUNNING="26630"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="31291,26630"
PERLBREW_BASHRC_VERSION="0.76"
PERLBREW_HOME="/home/dcollins/.perlbrew"
PERLBREW_ROOT="/home/dcollins/toolchain/perl5"
PERL_CR_SMOKER_CURRENT="TAP-Formatter-Bamboo-0.04"
PERL_CR_SMOKER_RUNONCE="1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan4/install/lib/perl5/site_perl/5.24.1/x86_64-linux-thread-multi
/home/cpan4/install/lib/perl5/site_perl/5.24.1
/home/cpan4/install/lib/perl5/5.24.1/x86_64-linux-thread-multi
/home/cpan4/install/lib/perl5/5.24.1
.