Report for DB-Pluggable-1.112001

Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: NA DB-Pluggable-1.112001 v5.8.1 GNU/Linux
Date: 2016-02-13T23:00:10Z

This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--
Dear base64.tokyo,

This is a computer-generated report for DB-Pluggable-1.112001
on perl 5.8.1, created by CPAN-Reporter-1.2015.

Thank you for uploading your work to CPAN.  While attempting to build or test
this distribution, the distribution signaled that support is not available
either for this operating system or this version of Perl.  Nevertheless, any
diagnostic output produced is provided below for reference.  If this is not
what you expect, you may wish to consult the CPAN Testers Wiki:

http://wiki.cpantesters.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester:

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 "/tmp/basesmoker-reloperl-4NU1/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Perl v5.10.0 required--this is only v5.8.1, stopped at lib/DB/Pluggable.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable.pm line 4.
Compilation failed in require at -e line 1.

#   Failed test 'DB::Pluggable loaded ok'
#   at t/00-compile.t line 48.
#                   ''
#     doesn't match '(?s-xim:^\s*DB::Pluggable ok)'
Perl v5.10.0 required--this is only v5.8.1, stopped at lib/DB/Pluggable/Plugin/BreakOnTestNumber.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable/Plugin/BreakOnTestNumber.pm line 4.
Compilation failed in require at -e line 1.

#   Failed test 'DB::Pluggable::Plugin::BreakOnTestNumber loaded ok'
#   at t/00-compile.t line 48.
#                   ''
#     doesn't match '(?s-xim:^\s*DB::Pluggable::Plugin::BreakOnTestNumber ok)'
Perl v5.10.0 required--this is only v5.8.1, stopped at lib/DB/Pluggable/Plugin/DataPrinter.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable/Plugin/DataPrinter.pm line 4.
Compilation failed in require at -e line 1.

#   Failed test 'DB::Pluggable::Plugin::DataPrinter loaded ok'
#   at t/00-compile.t line 48.
#                   ''
#     doesn't match '(?s-xim:^\s*DB::Pluggable::Plugin::DataPrinter ok)'
Perl v5.10.0 required--this is only v5.8.1, stopped at lib/DB/Pluggable/Plugin/TypeAhead.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable/Plugin/TypeAhead.pm line 4.
Compilation failed in require at -e line 1.

#   Failed test 'DB::Pluggable::Plugin::TypeAhead loaded ok'
#   at t/00-compile.t line 48.
#                   ''
#     doesn't match '(?s-xim:^\s*DB::Pluggable::Plugin::TypeAhead ok)'
Perl v5.10.0 required--this is only v5.8.1, stopped at lib/DB/Pluggable/Role/AfterInit.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable/Role/AfterInit.pm line 4.
Compilation failed in require at -e line 1.

#   Failed test 'DB::Pluggable::Role::AfterInit loaded ok'
#   at t/00-compile.t line 48.
#                   ''
#     doesn't match '(?s-xim:^\s*DB::Pluggable::Role::AfterInit ok)'
Perl v5.10.0 required--this is only v5.8.1, stopped at lib/DB/Pluggable/Role/Eval.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable/Role/Eval.pm line 4.
Compilation failed in require at -e line 1.

#   Failed test 'DB::Pluggable::Role::Eval loaded ok'
#   at t/00-compile.t line 48.
#                   ''
#     doesn't match '(?s-xim:^\s*DB::Pluggable::Role::Eval ok)'
Perl v5.10.0 required--this is only v5.8.1, stopped at lib/DB/Pluggable/Role/Initializer.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable/Role/Initializer.pm line 4.
Compilation failed in require at -e line 1.

#   Failed test 'DB::Pluggable::Role::Initializer loaded ok'
#   at t/00-compile.t line 48.
#                   ''
#     doesn't match '(?s-xim:^\s*DB::Pluggable::Role::Initializer ok)'
Perl v5.10.0 required--this is only v5.8.1, stopped at lib/DB/Pluggable/Role/WatchFunction.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable/Role/WatchFunction.pm line 4.
Compilation failed in require at -e line 1.

#   Failed test 'DB::Pluggable::Role::WatchFunction loaded ok'
#   at t/00-compile.t line 48.
#                   ''
#     doesn't match '(?s-xim:^\s*DB::Pluggable::Role::WatchFunction ok)'
# Looks like you failed 8 tests of 8.
t/00-compile.t ........... 
Dubious, test returned 8 (wstat 2048, 0x800)
Failed 8/8 subtests 
# Testing with Perl 5.008001, /tmp/basesmoker-reloperl-4NU1/bin/perl
Bailout called.  Further testing stopped:  can't load Brickyard

#   Failed test 'require Brickyard;'
#   at t/000-report-versions.t line 441.
#     Tried to require 'Brickyard'.
#     Error:  Can't locate Brickyard.pm in @INC (@INC contains: /tmp/loop_over_bdir-31667-pRYMx3/DB-Pluggable-1.112001-0/blib/lib /tmp/loop_over_bdir-31667-pRYMx3/DB-Pluggable-1.112001-0/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.1/8d81/lib/5.8.1/x86_64-linux-ld /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.1/8d81/lib/5.8.1 /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.1/8d81/lib/site_perl/5.8.1/x86_64-linux-ld /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.1/8d81/lib/site_perl/5.8.1 /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.1/8d81/lib/site_perl .) at (eval 7) line 2.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 just after 1.
FAILED--Further testing stopped: can't load Brickyard
Makefile:891: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module                  Need     Have    
    ----------------------- -------- --------
  ! Brickyard               1.111750 n/a     
  ! Brickyard::Accessor     0        n/a     
  ! Brickyard::Role::Plugin 0        n/a     
  ! Data::Printer           0        n/a     
    Hook::LexWrap           0        0.25    
    Role::Basic             0        0.13    
    Test::Builder           0        1.001014

build_requires:

    Module                  Need     Have    
    ----------------------- -------- --------
    ExtUtils::MakeMaker     0        7.10    

configure_requires:

    Module                  Need     Have    
    ----------------------- -------- --------
    ExtUtils::MakeMaker     6.58     7.10    


------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_US.UTF-8
    LANGUAGE = en_US:en
    PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
    PERL5LIB = 
    PERL5OPT = 
    PERL5_CPANPLUS_IS_RUNNING = 29692
    PERL5_CPAN_IS_RUNNING = 29692
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/bin/zsh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /tmp/basesmoker-reloperl-4NU1/bin/perl
    $UID/$EUID = 1005 / 1005
    $GID = 1005 1005
    $EGID = 1005 1005

Perl module toolchain versions installed:

    Module              Have    
    ------------------- --------
    CPAN                2.12    
    CPAN::Meta          2.150005
    Cwd                 3.62    
    ExtUtils::CBuilder  0.280224
    ExtUtils::Command   7.10    
    ExtUtils::Install   2.04    
    ExtUtils::MakeMaker 7.10    
    ExtUtils::Manifest  1.70    
    ExtUtils::ParseXS   3.30    
    File::Spec          3.62    
    JSON                2.90    
    JSON::PP            2.27300 
    Module::Build       0.4216  
    Module::Signature   0.79    
    Parse::CPAN::Meta   1.4417  
    Test::Harness       3.36    
    Test::More          1.001014
    YAML                1.15    
    YAML::Syck          1.29    
    version             0.9912  


--

Summary of my perl5 (revision 5.0 version 8 subversion 1) configuration:
  Platform:
    osname=linux, osvers=4.3.0-1-amd64, archname=x86_64-linux-ld
    uname='linux k83 4.3.0-1-amd64 #1 smp debian 4.3.3-7 (2016-01-19) x86_64 gnulinux '
    config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.1/8d81 -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Uuseithreads -Duselongdouble'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-fno-strict-aliasing -I/usr/local/include'
    ccversion='', gccversion='5.3.1 20160121', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
    libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
    perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
    libc=libc-2.21.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.21'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'


Characteristics of this binary (from libperl): 
  Compile-time options: USE_64_BIT_INT USE_64_BIT_ALL USE_LONG_DOUBLE USE_LARGE_FILES
  Locally applied patches:
  	Devel::PatchPerl 1.40
  Built under linux
  Compiled at Feb 12 2016 20:00:03
  %ENV:
    PERL5LIB=""
    PERL5OPT=""
    PERL5_CPANPLUS_IS_RUNNING="29692"
    PERL5_CPAN_IS_RUNNING="29692"
    PERL_MM_USE_DEFAULT="1"
  @INC:
    /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.1/8d81/lib/5.8.1/x86_64-linux-ld
    /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.1/8d81/lib/5.8.1
    /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.1/8d81/lib/site_perl/5.8.1/x86_64-linux-ld
    /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.1/8d81/lib/site_perl/5.8.1
    /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.1/8d81/lib/site_perl
    .