Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: NA DB-Pluggable-1.112001 v5.8.9 GNU/Linux
Date: 2011-07-19T19:15:15Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Marcel Gruenauer,
This is a computer-generated report for DB-Pluggable-1.112001
on perl 5.8.9, created by CPAN-Reporter-1.19_04.
Thank you for uploading your work to CPAN. While attempting to build or test
this distribution, the distribution signaled that support is not available
either for this operating system or this version of Perl. Nevertheless, any
diagnostic output produced is provided below for reference. If this is not
what you expect, you may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/1df5/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Perl v5.10.0 required--this is only v5.8.9, stopped at lib/DB/Pluggable.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable.pm line 4.
Compilation failed in require at -e line 1.
# Failed test 'DB::Pluggable loaded ok'
# at t/00-compile.t line 48.
# ''
# doesn't match '(?s-xim:^\s*DB::Pluggable ok)'
Perl v5.10.0 required--this is only v5.8.9, stopped at lib/DB/Pluggable/Plugin/BreakOnTestNumber.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable/Plugin/BreakOnTestNumber.pm line 4.
Compilation failed in require at -e line 1.
# Failed test 'DB::Pluggable::Plugin::BreakOnTestNumber loaded ok'
# at t/00-compile.t line 48.
# ''
# doesn't match '(?s-xim:^\s*DB::Pluggable::Plugin::BreakOnTestNumber ok)'
Perl v5.10.0 required--this is only v5.8.9, stopped at lib/DB/Pluggable/Plugin/DataPrinter.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable/Plugin/DataPrinter.pm line 4.
Compilation failed in require at -e line 1.
# Failed test 'DB::Pluggable::Plugin::DataPrinter loaded ok'
# at t/00-compile.t line 48.
# ''
# doesn't match '(?s-xim:^\s*DB::Pluggable::Plugin::DataPrinter ok)'
Perl v5.10.0 required--this is only v5.8.9, stopped at lib/DB/Pluggable/Plugin/TypeAhead.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable/Plugin/TypeAhead.pm line 4.
Compilation failed in require at -e line 1.
# Failed test 'DB::Pluggable::Plugin::TypeAhead loaded ok'
# at t/00-compile.t line 48.
# ''
# doesn't match '(?s-xim:^\s*DB::Pluggable::Plugin::TypeAhead ok)'
Perl v5.10.0 required--this is only v5.8.9, stopped at lib/DB/Pluggable/Role/AfterInit.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable/Role/AfterInit.pm line 4.
Compilation failed in require at -e line 1.
# Failed test 'DB::Pluggable::Role::AfterInit loaded ok'
# at t/00-compile.t line 48.
# ''
# doesn't match '(?s-xim:^\s*DB::Pluggable::Role::AfterInit ok)'
Perl v5.10.0 required--this is only v5.8.9, stopped at lib/DB/Pluggable/Role/Eval.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable/Role/Eval.pm line 4.
Compilation failed in require at -e line 1.
# Failed test 'DB::Pluggable::Role::Eval loaded ok'
# at t/00-compile.t line 48.
# ''
# doesn't match '(?s-xim:^\s*DB::Pluggable::Role::Eval ok)'
Perl v5.10.0 required--this is only v5.8.9, stopped at lib/DB/Pluggable/Role/Initializer.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable/Role/Initializer.pm line 4.
Compilation failed in require at -e line 1.
# Failed test 'DB::Pluggable::Role::Initializer loaded ok'
# at t/00-compile.t line 48.
# ''
# doesn't match '(?s-xim:^\s*DB::Pluggable::Role::Initializer ok)'
Perl v5.10.0 required--this is only v5.8.9, stopped at lib/DB/Pluggable/Role/WatchFunction.pm line 4.
BEGIN failed--compilation aborted at lib/DB/Pluggable/Role/WatchFunction.pm line 4.
Compilation failed in require at -e line 1.
# Failed test 'DB::Pluggable::Role::WatchFunction loaded ok'
# at t/00-compile.t line 48.
# ''
# doesn't match '(?s-xim:^\s*DB::Pluggable::Role::WatchFunction ok)'
# Looks like you failed 8 tests of 8.
t/00-compile.t ...........
Dubious, test returned 8 (wstat 2048, 0x800)
Failed 8/8 subtests
# Testing with Perl 5.008009, /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/1df5/bin/perl
Bailout called. Further testing stopped: can't load Brickyard
# Failed test 'require Brickyard;'
# at t/000-report-versions.t line 441.
# Tried to require 'Brickyard'.
# Error: Can't locate Brickyard.pm in @INC (@INC contains: /home/sand/.cpan/build/DB-Pluggable-1.112001-4GJqzr/blib/lib /home/sand/.cpan/build/DB-Pluggable-1.112001-4GJqzr/blib/arch /home/src/perl/repoperls/installed-perls/perl/perl-5.8.9/1df5/lib/5.8.9/x86_64-linux /home/src/perl/repoperls/installed-perls/perl/perl-5.8.9/1df5/lib/5.8.9 /home/src/perl/repoperls/installed-perls/perl/perl-5.8.9/1df5/lib/site_perl/5.8.9/x86_64-linux /home/src/perl/repoperls/installed-perls/perl/perl-5.8.9/1df5/lib/site_perl/5.8.9 .) at (eval 7) line 2.
# Tests were run but no plan was declared and done_testing() was not seen.
FAILED--Further testing stopped: can't load Brickyard
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
----------------------- -------- ----
! Brickyard 1.111750 n/a
! Brickyard::Accessor 0 n/a
! Brickyard::Role::Plugin 0 n/a
Data::Printer 0 0.22
Hook::LexWrap 0 0.24
Role::Basic 0 0.12
Test::Builder 0 0.98
build_requires:
Module Need Have
----------------------- -------- ----
ExtUtils::MakeMaker 0 6.58
configure_requires:
Module Need Have
----------------------- -------- ----
ExtUtils::MakeMaker 6.58 6.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 21257
PERL5_CPAN_IS_RUNNING = 21257
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/1df5/bin/perl
$UID/$EUID = 1001 / 1001
$GID = 1001 1001
$EGID = 1001 1001
Perl module toolchain versions installed:
Module Have
------------------- -----------
CPAN 1.97_51
CPAN::Meta 2.110930001
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.52
ExtUtils::MakeMaker 6.58
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 3.00_02
File::Spec 3.33
JSON 2.53
JSON::PP 2.27200
Module::Build 0.3800
Module::Signature 0.68
Parse::CPAN::Meta 1.4401
Test::Harness 3.23
Test::More 0.98
YAML 0.73
YAML::Syck 1.17
version 0.91
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=linux, osvers=2.6.32-5-amd64, archname=x86_64-linux
uname='linux k81 2.6.32-5-amd64 #1 smp mon mar 7 21:35:22 utc 2011 x86_64 gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/perl-5.8.9/1df5 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Uuseithreads -Uuselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.4.5', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.11.2.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.2'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_FAST_STDIO USE_LARGE_FILES USE_PERLIO
Built under linux
Compiled at May 7 2011 10:31:17
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="21257"
PERL5_CPAN_IS_RUNNING="21257"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/src/perl/repoperls/installed-perls/perl/perl-5.8.9/1df5/lib/5.8.9/x86_64-linux
/home/src/perl/repoperls/installed-perls/perl/perl-5.8.9/1df5/lib/5.8.9
/home/src/perl/repoperls/installed-perls/perl/perl-5.8.9/1df5/lib/site_perl/5.8.9/x86_64-linux
/home/src/perl/repoperls/installed-perls/perl/perl-5.8.9/1df5/lib/site_perl/5.8.9
.