Mouse vv2.5.11 Perl 5 v5.12.5 x86_64-linux-thread-multi
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Mouse vv2.5.11
- Platform
- Perl 5 v5.12.5 x86_64-linux-thread-multi
- Date
- 2024-12-03 17:31:14
- ID
- 6599cfa6-b19c-11ef-98b0-b3c3213a625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Shoichi Kaji,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
Building Mouse
Generate Mouse::Tiny ...
done.
cc -Ixs-src -I/home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi/CORE -fPIC -Wall -Wextra -Wdeclaration-after-statement -Wc++-compat -c -D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -o xs-src/MouseAccessor.o xs-src/MouseAccessor.c
xs-src/MouseAccessor.xs: In function 'mouse_simple_accessor_generate':
xs-src/MouseAccessor.xs:337:12: warning: variable 'mg' set but not used [-Wunused-but-set-variable]
337 | MAGIC* mg;
| ^~
cc -Ixs-src -I/home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi/CORE -fPIC -Wall -Wextra -Wdeclaration-after-statement -Wc++-compat -c -D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -o xs-src/MouseAttribute.o xs-src/MouseAttribute.c
cc -Ixs-src -I/home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi/CORE -fPIC -Wall -Wextra -Wdeclaration-after-statement -Wc++-compat -c -D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -o xs-src/MouseTypeConstraints.o xs-src/MouseTypeConstraints.c
xs-src/MouseTypeConstraints.xs: In function 'mouse_tc_generate':
xs-src/MouseTypeConstraints.xs:503:12: warning: variable 'mg' set but not used [-Wunused-but-set-variable]
503 | MAGIC* mg;
| ^~
cc -Ixs-src -I/home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi/CORE -fPIC -Wall -Wextra -Wdeclaration-after-statement -Wc++-compat -c -D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -o xs-src/MouseUtil.o xs-src/MouseUtil.c
In file included from /home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi/CORE/perl.h:954,
from xs-src/xshelper.h:36,
from xs-src/mouse.h:17,
from xs-src/MouseUtil.xs:1:
xs-src/MouseUtil.xs: In function 'mouse_call_sv_safe':
/home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi/CORE/perl.h:171:17: warning: passing argument 2 of 'Perl_call_sv' from incompatible pointer type [-Wincompatible-pointer-types]
171 | # define aTHX my_perl
| ^~~~~~~
| |
| PerlInterpreter * {aka struct interpreter *}
/home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi/CORE/embed.h:3115:52: note: in definition of macro 'call_sv'
3115 | #define call_sv(a,b) Perl_call_sv(aTHX_ a,b)
| ^
/home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi/CORE/perl.h:183:25: note: in expansion of macro 'aTHX'
183 | # define aTHX_ aTHX,
| ^~~~
xs-src/MouseUtil.xs:138:21: note: in expansion of macro 'aTHX_'
138 | count = call_sv(aTHX_ sv, flags | G_EVAL);
| ^~~~~
In file included from /home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi/CORE/perl.h:4946:
/home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi/CORE/proto.h:2536:48: note: expected 'SV *' {aka 'struct sv *'} but argument is of type 'PerlInterpreter *' {aka 'struct interpreter *'}
2536 | PERL_CALLCONV I32 Perl_call_sv(pTHX_ SV* sv, VOL I32 flags)
| ~~~~^~
xs-src/MouseUtil.xs:138:27: warning: passing argument 3 of 'Perl_call_sv' makes integer from pointer without a cast [-Wint-conversion]
138 | count = call_sv(aTHX_ sv, flags | G_EVAL);
| ^~
| |
| SV * {aka struct sv *}
/home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi/CORE/embed.h:3115:52: note: in definition of macro 'call_sv'
3115 | #define call_sv(a,b) Perl_call_sv(aTHX_ a,b)
| ^
/home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi/CORE/proto.h:2536:60: note: expected 'I32' {aka 'volatile int'} but argument is of type 'SV *' {aka 'struct sv *'}
2536 | PERL_CALLCONV I32 Perl_call_sv(pTHX_ SV* sv, VOL I32 flags)
/home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi/CORE/embed.h:3115:33: error: too many arguments to function 'Perl_call_sv'
3115 | #define call_sv(a,b) Perl_call_sv(aTHX_ a,b)
| ^~~~~~~~~~~~
xs-src/MouseUtil.xs:138:13: note: in expansion of macro 'call_sv'
138 | count = call_sv(aTHX_ sv, flags | G_EVAL);
| ^~~~~~~
/home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi/CORE/proto.h:2536:25: note: declared here
2536 | PERL_CALLCONV I32 Perl_call_sv(pTHX_ SV* sv, VOL I32 flags)
| ^~~~~~~~~~~~
error building xs-src/MouseUtil.o from 'xs-src/MouseUtil.c' at /home/cpan/pit/thr/perl-5.12.5/lib/site_perl/5.12.5/ExtUtils/CBuilder/Base.pm line 185, <DATA> line 1.
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::CBuilder 0.280236 0
Scalar::Util 1.68 1.14
Test::Exception 0.43 0
Test::Fatal 0.017 0
Test::LeakTrace 0.17 0
Test::More 1.302204 0.88
Test::Output 1.034 0
Test::Requires 0.11 0
Try::Tiny 0.32 0
XSLoader 0.24 0.02
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.70
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.70
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.51
File::Spec 3.75
Module::Build 0.4234
Pod::Parser 1.37
Pod::Simple 3.14
Test2 1.302204
Test::Harness 3.48
Test::More 1.302204
version 0.9932
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C.UTF-8
LC_COLLATE = C
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PERL5LIB = /home/cpan/pit/jail/ly6yDOFDnU/lib/perl5
PERL5_CPANPLUS_IS_RUNNING = 12990
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.12.5
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/ly6yDOFDnU
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/ly6yDOFDnU"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/ly6yDOFDnU
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.12.5/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 5) configuration:
Platform:
osname=linux, osvers=5.10.16-0-lts, archname=x86_64-linux-thread-multi
uname='linux agaric 5.10.16-0-lts #1-alpine smp wed, 17 feb 2021 08:17:06 utc x86_64 linux '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.12.5 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector'
ccversion='', gccversion='10.2.1 20201203', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/../lib /usr/lib/../lib /lib /usr/lib
libs=-lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-ldl -lm -lcrypt -lutil -lpthread -lc
libc=/usr/lib/libc.a, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 2.08
Built under linux
Compiled at Mar 12 2021 13:50:57
%ENV:
PERL5LIB="/home/cpan/pit/jail/ly6yDOFDnU/lib/perl5"
PERL5_CPANPLUS_IS_RUNNING="12990"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.12.5"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/ly6yDOFDnU"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/ly6yDOFDnU""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/ly6yDOFDnU"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/cpan/pit/jail/ly6yDOFDnU/lib/perl5/5.12.5/x86_64-linux-thread-multi
/home/cpan/pit/jail/ly6yDOFDnU/lib/perl5/5.12.5
/home/cpan/pit/jail/ly6yDOFDnU/lib/perl5/x86_64-linux-thread-multi
/home/cpan/pit/jail/ly6yDOFDnU/lib/perl5
/home/cpan/pit/thr/perl-5.12.5/lib/site_perl/5.12.5/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.12.5/lib/site_perl/5.12.5
/home/cpan/pit/thr/perl-5.12.5/lib/5.12.5/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.12.5/lib/5.12.5
.