Env-Modulecmd v1.3 Perl 5 v5.10.0 i386-freebsd
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Env-Modulecmd v1.3
- Platform
- Perl 5 v5.10.0 i386-freebsd
- Date
- 2018-02-14 11:21:13
- ID
- 2a58a072-1179-11e8-9abe-a171f40b351c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Ron Isaacson,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9172. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/bare/perl-5.10.0/bin/perl" "-Iblib/lib" "-Iblib/arch" test.pl
1..4
# Running under perl version 5.010000 for freebsd
# Current time local: Wed Feb 14 11:21:13 2018
# Current time GMT: Wed Feb 14 11:21:13 2018
# Using Test.pm version 1.25
***** SKIPPING TESTS *****
Env::Modulecmd was not able to invoke 'modulecmd'. This means
one of two things:
1. You do not have the 'modules' package installed. See
http://www.modules.org for more information about this
package. If you don't have it, Env::Modulecmd is probably
not of any use to you.
2. You do have the 'modules' package installed, but
Env::Modulecmd was not able to find 'modulecmd'. There
are three ways to correct this problem:
a. Put 'modulecmd' in your PATH
b. Set the environment variable PERL_MODULECMD to the full
path to 'modulecmd'
c. Rebuild the Env::Modulecmd package with a default
PERL_MODULECMD; see the README for more information
***** SKIPPING TESTS *****
ok 1 # skip because modulecmd was not found
ok 2 # skip because modulecmd was not found
ok 3 # skip because modulecmd was not found
ok 4 # skip because modulecmd was not found
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.30 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9172
CPANPLUS::Dist::Build 0.88
Cwd 3.62
ExtUtils::CBuilder 0.280230
ExtUtils::Command 7.30
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.30
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.35
File::Spec 3.62
Module::Build 0.4224
Pod::Parser 1.35
Pod::Simple 3.32
Test2 1.302120
Test::Harness 3.39
Test::More 1.302120
version 0.9918
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.02.
Powered by minismokebox version 0.68
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/BEpbfpcTFG/Env-Modulecmd-1.3/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/BEpbfpcTFG/Env-Modulecmd-1.3/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 25629
PERL5_CPANPLUS_IS_VERSION = 0.9172
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.10.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.10.0/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=freebsd, osvers=10.3-release-p2, archname=i386-freebsd
uname='freebsd froggle 10.3-release-p2 freebsd 10.3-release-p2 #0: wed may 4 14:06:02 utc 2016 root@amd64-builder.daemonology.net:usrobjusrsrcsysgeneric i386 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.10.0'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.2.1 Compatible FreeBSD Clang 3.4.1 (tags/RELEASE_34/dot1-final 208032)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
USE_LARGE_FILES USE_PERLIO
Locally applied patches:
Devel::PatchPerl 1.42
Built under freebsd
Compiled at May 7 2016 19:16:42
%ENV:
PERL5LIB=":/usr/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/BEpbfpcTFG/Env-Modulecmd-1.3/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/BEpbfpcTFG/Env-Modulecmd-1.3/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="25629"
PERL5_CPANPLUS_IS_VERSION="0.9172"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.10.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/usr/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/BEpbfpcTFG/Env-Modulecmd-1.3/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/BEpbfpcTFG/Env-Modulecmd-1.3/blib/arch
/usr/home/cpan/pit/bare/perl-5.10.0/lib/5.10.0/i386-freebsd
/usr/home/cpan/pit/bare/perl-5.10.0/lib/5.10.0
/usr/home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0/i386-freebsd
/usr/home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0
.