Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL BioX-CLPM-0.01 v5.10.1 GNU/Linux
Date: 2012-07-05T07:06:53Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear CRABTREE,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9130. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
Use of uninitialized value $Test::Harness::Switches in length at /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/Module/Build/Base.pm line 2767.
# Failed test 'use BioX::CLPM;'
# at t/00.load.t line 4.
# Tried to use 'BioX::CLPM'.
# Error: Can't locate Class/Std.pm in @INC (@INC contains: /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/x86_64-linux-ld /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1 /home/cpan/pit/bare-ld/perl-5.10.1/lib/site_perl/5.10.1/x86_64-linux-ld /home/cpan/pit/bare-ld/perl-5.10.1/lib/site_perl/5.10.1 .) at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Base.pm line 2.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Base.pm line 2.
# Compilation failed in require at (eval 6) line 3.
# ...propagated at /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/base.pm line 94.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM.pm line 2.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
# Failed test 'use BioX::CLPM::Engine;'
# at t/00.load.t line 5.
# Tried to use 'BioX::CLPM::Engine'.
# Error: Attempt to reload BioX/CLPM/Base.pm aborted.
# Compilation failed in require at (eval 8) line 3.
# ...propagated at /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/base.pm line 94.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Engine.pm line 2.
# Compilation failed in require at (eval 7) line 2.
# BEGIN failed--compilation aborted at (eval 7) line 2.
# Failed test 'use BioX::CLPM::Peaks;'
# at t/00.load.t line 6.
# Tried to use 'BioX::CLPM::Peaks'.
# Error: Can't locate Class/Std.pm in @INC (@INC contains: /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/x86_64-linux-ld /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1 /home/cpan/pit/bare-ld/perl-5.10.1/lib/site_perl/5.10.1/x86_64-linux-ld /home/cpan/pit/bare-ld/perl-5.10.1/lib/site_perl/5.10.1 .) at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Peaks.pm line 3.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Peaks.pm line 3.
# Compilation failed in require at (eval 9) line 2.
# BEGIN failed--compilation aborted at (eval 9) line 2.
# Failed test 'use BioX::CLPM::Linker;'
# at t/00.load.t line 7.
# Tried to use 'BioX::CLPM::Linker'.
# Error: Attempt to reload BioX/CLPM/Base.pm aborted.
# Compilation failed in require at (eval 11) line 3.
# ...propagated at /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/base.pm line 94.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Linker.pm line 2.
# Compilation failed in require at (eval 10) line 2.
# BEGIN failed--compilation aborted at (eval 10) line 2.
# Failed test 'use BioX::CLPM::Enzyme;'
# at t/00.load.t line 8.
# Tried to use 'BioX::CLPM::Enzyme'.
# Error: Attempt to reload BioX/CLPM/Base.pm aborted.
# Compilation failed in require at (eval 13) line 3.
# ...propagated at /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/base.pm line 94.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Enzyme.pm line 2.
# Compilation failed in require at (eval 12) line 2.
# BEGIN failed--compilation aborted at (eval 12) line 2.
# Failed test 'use BioX::CLPM::Amino;'
# at t/00.load.t line 9.
# Tried to use 'BioX::CLPM::Amino'.
# Error: Attempt to reload BioX/CLPM/Base.pm aborted.
# Compilation failed in require at (eval 15) line 3.
# ...propagated at /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/base.pm line 94.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Amino.pm line 2.
# Compilation failed in require at (eval 14) line 2.
# BEGIN failed--compilation aborted at (eval 14) line 2.
# Failed test 'use BioX::CLPM::Sequence;'
# at t/00.load.t line 10.
# Tried to use 'BioX::CLPM::Sequence'.
# Error: Attempt to reload BioX/CLPM/Base.pm aborted.
# Compilation failed in require at (eval 17) line 3.
# ...propagated at /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/base.pm line 94.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Sequence.pm line 2.
# Compilation failed in require at (eval 16) line 2.
# BEGIN failed--compilation aborted at (eval 16) line 2.
# Failed test 'use BioX::CLPM::Fragments;'
# at t/00.load.t line 11.
# Tried to use 'BioX::CLPM::Fragments'.
# Error: Attempt to reload BioX/CLPM/Base.pm aborted.
# Compilation failed in require at (eval 19) line 3.
# ...propagated at /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/base.pm line 94.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Fragments.pm line 2.
# Compilation failed in require at (eval 18) line 2.
# BEGIN failed--compilation aborted at (eval 18) line 2.
# Failed test 'use BioX::CLPM::Fragments::Simple;'
# at t/00.load.t line 12.
# Tried to use 'BioX::CLPM::Fragments::Simple'.
# Error: Can't locate Class/Std.pm in @INC (@INC contains: /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/x86_64-linux-ld /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1 /home/cpan/pit/bare-ld/perl-5.10.1/lib/site_perl/5.10.1/x86_64-linux-ld /home/cpan/pit/bare-ld/perl-5.10.1/lib/site_perl/5.10.1 .) at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Fragments/Simple.pm line 3.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Fragments/Simple.pm line 3.
# Compilation failed in require at (eval 20) line 2.
# BEGIN failed--compilation aborted at (eval 20) line 2.
# Failed test 'use BioX::CLPM::Fragments::Linked;'
# at t/00.load.t line 13.
# Tried to use 'BioX::CLPM::Fragments::Linked'.
# Error: Can't locate Class/Std.pm in @INC (@INC contains: /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/x86_64-linux-ld /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1 /home/cpan/pit/bare-ld/perl-5.10.1/lib/site_perl/5.10.1/x86_64-linux-ld /home/cpan/pit/bare-ld/perl-5.10.1/lib/site_perl/5.10.1 .) at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Fragments/Linked.pm line 3.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Fragments/Linked.pm line 3.
# Compilation failed in require at (eval 21) line 2.
# BEGIN failed--compilation aborted at (eval 21) line 2.
# Failed test 'use BioX::CLPM::Matches;'
# at t/00.load.t line 14.
# Tried to use 'BioX::CLPM::Matches'.
# Error: Can't locate Class/Std.pm in @INC (@INC contains: /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/x86_64-linux-ld /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1 /home/cpan/pit/bare-ld/perl-5.10.1/lib/site_perl/5.10.1/x86_64-linux-ld /home/cpan/pit/bare-ld/perl-5.10.1/lib/site_perl/5.10.1 .) at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Matches.pm line 3.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Matches.pm line 3.
# Compilation failed in require at (eval 22) line 2.
# BEGIN failed--compilation aborted at (eval 22) line 2.
# Failed test 'use BioX::CLPM::Base;'
# at t/00.load.t line 15.
# Tried to use 'BioX::CLPM::Base'.
# Error: Attempt to reload BioX/CLPM/Base.pm aborted.
# Compilation failed in require at (eval 23) line 2.
# BEGIN failed--compilation aborted at (eval 23) line 2.
# Testing BioX::CLPM
# Looks like you failed 12 tests of 12.
t/00.load.t ...
Dubious, test returned 12 (wstat 3072, 0xc00)
Failed 12/12 subtests
# Failed test 'use BioX::CLPM::Amino;'
# at t/01.amino.t line 4.
# Tried to use 'BioX::CLPM::Amino'.
# Error: Can't locate Class/Std.pm in @INC (@INC contains: /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/x86_64-linux-ld /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1 /home/cpan/pit/bare-ld/perl-5.10.1/lib/site_perl/5.10.1/x86_64-linux-ld /home/cpan/pit/bare-ld/perl-5.10.1/lib/site_perl/5.10.1 .) at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Base.pm line 2.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Base.pm line 2.
# Compilation failed in require at (eval 6) line 3.
# ...propagated at /home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/base.pm line 94.
# BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib/BioX/CLPM/Amino.pm line 2.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
Can't locate object method "new" via package "BioX::CLPM::Amino" at t/01.amino.t line 7.
# Looks like you planned 2 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 255 just after 1.
t/01.amino.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/2 subtests
Test Summary Report
-------------------
t/00.load.t (Wstat: 3072 Tests: 12 Failed: 12)
Failed tests: 1-12
Non-zero exit status: 12
t/01.amino.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 2 tests but ran 1.
Files=2, Tests=13, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.04 cusr 0.00 csys = 0.07 CPU)
Result: FAIL
Failed 2/2 test programs. 13/13 subtests failed.
BEGIN failed--compilation aborted at -e line 1.
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Class::Std
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'CRABTREE (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Class::Std' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Test::More 0.98 0
version 0.99 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9130
CPANPLUS::Dist::Build 0.62
Cwd 3.33
ExtUtils::CBuilder 0.280205
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.62
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.15
File::Spec 3.33
Module::Build 0.4001
Test::Harness 3.25
Test::More 0.98
version 0.99
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.82.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PERL5LIB = :/home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 22992
PERL5_CPANPLUS_IS_VERSION = 0.9130
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare-ld/conf/perl-5.10.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare-ld/perl-5.10.1/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 1) configuration:
Platform:
osname=linux, osvers=3.2.0-24-generic, archname=x86_64-linux-ld
uname='linux pluto 3.2.0-24-generic #37-ubuntu smp wed apr 25 08:43:22 utc 2012 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare-ld/perl-5.10.1 -Duselongdouble'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.6.3', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.15'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_LONG_DOUBLE
USE_PERLIO
Built under linux
Compiled at May 14 2012 23:29:40
%ENV:
PERL5LIB=":/home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="22992"
PERL5_CPANPLUS_IS_VERSION="0.9130"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare-ld/conf/perl-5.10.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/lib
/home/cpan/pit/bare-ld/conf/perl-5.10.1/.cpanplus/5.10.1/build/BioX-CLPM/blib/arch
/home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.10.1/lib/5.10.1
/home/cpan/pit/bare-ld/perl-5.10.1/lib/site_perl/5.10.1/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.10.1/lib/site_perl/5.10.1
.