Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Config-DB-0.2 v5.10.1 FreeBSD
Date: 2012-01-09T09:26:14Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear ICC,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9115. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Jan 9 09:26:13 2012] cp lib/Config/DB/Record.pm blib/lib/Config/DB/Record.pm
cp lib/Config/DB.pm blib/lib/Config/DB.pm
cp lib/Config/DB/Table.pm blib/lib/Config/DB/Table.pm
Manifying blib/man3/Config::DB::Record.3
Manifying blib/man3/Config::DB.3
Manifying blib/man3/Config::DB::Table.3
[ERROR] [Mon Jan 9 09:26:14 2012] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/home/cpan/pit/bare/perl-5.10.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_new.t ..... ok
DBD::DBM::db do failed: Cannot open /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Config-DB-0.2/notable.lck: No such file or directory (2) at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/lib/DBD/File.pm line 730 at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
[for Statement "DROP TABLE notable"] at t/02_params.t line 5.
t/02_params.t ..
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/6 subtests
# Failed test 'ok call'
# at t/02_params.t line 53.
# got: 'DBD::DBM::db selectall_hashref failed: No such column 'nofield AS dbcfg_key' at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
# [for Statement "SELECT nofield AS dbcfg_key, notable.* FROM notable"] at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Config-DB-0.2/blib/lib/Config/DB.pm line 107.
#
# Config::DB::read: reading 'notable' table at t/02_params.t line 52
# '
# expected: ''
# Looks like you failed 1 test of 6.
DBD::DBM::db do failed: Cannot open /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Config-DB-0.2/cfg.lck: No such file or directory (2) at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/lib/DBD/File.pm line 730 at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
[for Statement "DROP TABLE cfg"] at t/03_get.t line 5.
t/03_get.t .....
Dubious, test returned 25 (wstat 6400, 0x1900)
Failed 26/28 subtests
Test Summary Report
-------------------
t/02_params.t (Wstat: 256 Tests: 6 Failed: 1)
Failed test: 6
Non-zero exit status: 1
t/03_get.t (Wstat: 6400 Tests: 4 Failed: 2)
Failed tests: 3-4
Non-zero exit status: 25
Parse errors: Bad plan. You planned 28 tests but ran 4.
Files=3, Tests=23, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.20 cusr 0.02 csys = 0.25 CPU)
Result: FAIL
# Failed test 'ok call'
# at t/03_get.t line 20.
# got: 'DBD::DBM::db selectall_hashref failed: No such column 'ckey AS dbcfg_key' at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
# [for Statement "SELECT ckey AS dbcfg_key, cfg.* FROM cfg"] at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Config-DB-0.2/blib/lib/Config/DB.pm line 107.
#
# Config::DB::read: reading 'cfg' table at t/03_get.t line 19
# '
# expected: ''
# Failed test 'missing table parameter'
# at t/03_get.t line 23.
# 'DBD::DBM::db selectall_hashref failed: No such column 'ckey AS dbcfg_key' at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
# [for Statement "SELECT ckey AS dbcfg_key, cfg.* FROM cfg"] at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Config-DB-0.2/blib/lib/Config/DB.pm line 107.
#
# Config::DB::read: reading 'cfg' table at t/03_get.t line 22
# '
# doesn't match '(?-xism:^Config::DB::get: missing table parameter at t/03_get.t line \d+$)'
DBD::DBM::db selectall_hashref failed: No such column 'ckey AS dbcfg_key' at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
[for Statement "SELECT ckey AS dbcfg_key, cfg.* FROM cfg"] at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Config-DB-0.2/blib/lib/Config/DB.pm line 107.
Config::DB::read: reading 'cfg' table at t/03_get.t line 29
# Looks like you planned 28 tests but ran 4.
# Looks like you failed 2 tests of 4 run.
# Looks like your test exited with 25 just after 4.
Failed 2/3 test programs. 3/23 subtests failed.
*** Error code 25
Stop in /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Config-DB-0.2.
[MSG] [Mon Jan 9 09:26:14 2012] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
DBI 1.616 1.616
ExtUtils::MakeMaker 6.62 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9115
CPANPLUS::Dist::Build 0.60
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.62
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.11
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.95
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.66.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/arch:/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Config-DB-0.2/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Config-DB-0.2/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 27716
PERL5_CPANPLUS_IS_VERSION = 0.9115
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.10.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.10.1/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 1) configuration:
Platform:
osname=freebsd, osvers=9.0-rc3, archname=amd64-freebsd
uname='freebsd fremen 9.0-rc3 freebsd 9.0-rc3 #0: sun dec 4 08:56:36 utc 2011 root@farrell.cse.buffalo.edu:usrobjusrsrcsysgeneric amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.10.1'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070831 patched [FreeBSD]', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_PERLIO
Built under freebsd
Compiled at Dec 14 2011 19:23:07
%ENV:
PERL5LIB=":/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/arch:/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Config-DB-0.2/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Config-DB-0.2/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="27716"
PERL5_CPANPLUS_IS_VERSION="0.9115"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.10.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/DBI-1.616/blib/arch
/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Config-DB-0.2/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Config-DB-0.2/blib/arch
/usr/home/cpan/pit/bare/perl-5.10.1/lib/5.10.1/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.10.1/lib/5.10.1
/usr/home/cpan/pit/bare/perl-5.10.1/lib/site_perl/5.10.1/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.10.1/lib/site_perl/5.10.1
.