XML-All v0.02 Perl 5 v5.18.4 x86_64-linux-ld
- Status
- Fail
- From
- Andreas J. König (ANDK)
- Dist
-
XML-All v0.02
- Platform
- Perl 5 v5.18.4 x86_64-linux-ld
- Date
- 2017-12-05 22:23:44
- ID
- f49bd9cc-da0a-11e7-866c-66443af7396f
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Audrey Tang,
This is a computer-generated report for XML-All-0.02
on perl 5.18.4, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.18.4/2d7c/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use XML::All;'
# in t/1-basic.t at line 4.
# Tried to use 'XML::All'.
# Error: Bareword "XML::Twig::PCDATA" not allowed while "strict subs" in use at /tmp/loop_over_bdir-18089-GuLbqk/XML-All-0.02-0/blib/lib/XML/All.pm line 43.
# BEGIN not safe after errors--compilation aborted at /tmp/loop_over_bdir-18089-GuLbqk/XML-All-0.02-0/blib/lib/XML/All.pm line 110.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at t/1-basic.t line 4.
# Failed test 'scalar fetch'
# in t/1-basic.t at line 8.
# got: undef
# expected: 'a'
# Failed test 'scalar store'
# in t/1-basic.t at line 10.
# got: 'XML::All=SCALAR(0x55571aadabd0)'
# expected: 'XML::All=SCALAR(0x55571ab25988)'
Not an ARRAY reference at t/1-basic.t line 11.
# Looks like you planned 30 tests but only ran 3.
# Looks like you failed 3 tests of 3 run.
# Looks like your test died just after 3.
t/1-basic.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 30/30 subtests
Test Summary Report
-------------------
t/1-basic.t (Wstat: 65280 Tests: 3 Failed: 3)
Failed tests: 1-3
Non-zero exit status: 255
Parse errors: Bad plan. You planned 30 tests but ran 3.
Files=1, Tests=3, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.12 cusr 0.03 csys = 0.18 CPU)
Result: FAIL
Failed 1/1 test programs. 3/3 subtests failed.
Makefile:776: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- ----
Class::InsideOut 0 1.14
Exporter::Lite 0 0.08
Tie::Simple 0 1.04
XML::Literal 0 0.02
XML::Twig 0 3.52
build_requires:
Module Need Have
------------------- ---- ----
ExtUtils::MakeMaker 0 7.30
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB = /tmp/loop_over_bdir-18089-GuLbqk/XML-Literal-0.02-0/blib/arch:/tmp/loop_over_bdir-18089-GuLbqk/XML-Literal-0.02-0/blib/lib:/tmp/loop_over_bdir-18089-GuLbqk/Tie-Simple-1.04-0/blib/arch:/tmp/loop_over_bdir-18089-GuLbqk/Tie-Simple-1.04-0/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 18116
PERL5_CPAN_IS_RUNNING = 18116
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 8141,18116
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.18.4/2d7c/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.20
CPAN::Meta 2.150010
Cwd 3.62
ExtUtils::CBuilder 0.280230
ExtUtils::Command 7.30
ExtUtils::Install 2.06
ExtUtils::MakeMaker 7.30
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.35
File::Spec 3.62
JSON 2.95
JSON::PP 2.96
Module::Build 0.4224
Module::Signature 0.81
Parse::CPAN::Meta 2.150010
Test::Harness 3.39
Test::More 1.302119
YAML 1.24
YAML::Syck 1.30
version 0.9918
--
Summary of my perl5 (revision 5 version 18 subversion 4) configuration:
Derived from: 51202371ba68f3f52f13124a3ea1bc3c171e0ee2
Platform:
osname=linux, osvers=4.12.0-2-amd64, archname=x86_64-linux-ld
uname='linux k93msid 4.12.0-2-amd64 #1 smp debian 4.12.13-1 (2017-09-19) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.18.4/2d7c -Dmyhostname=k93msid -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Uuseithreads -Duselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='7.2.0', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.24.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.24'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND PERL_USE_DEVEL
USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LONG_DOUBLE USE_PERLIO
USE_PERL_ATOF
Locally applied patches:
uncommitted-changes
Built under linux
Compiled at Oct 3 2017 19:53:19
%ENV:
PERL5LIB="/tmp/loop_over_bdir-18089-GuLbqk/XML-Literal-0.02-0/blib/arch:/tmp/loop_over_bdir-18089-GuLbqk/XML-Literal-0.02-0/blib/lib:/tmp/loop_over_bdir-18089-GuLbqk/Tie-Simple-1.04-0/blib/arch:/tmp/loop_over_bdir-18089-GuLbqk/Tie-Simple-1.04-0/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="18116"
PERL5_CPAN_IS_RUNNING="18116"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="8141,18116"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/tmp/loop_over_bdir-18089-GuLbqk/XML-Literal-0.02-0/blib/arch
/tmp/loop_over_bdir-18089-GuLbqk/XML-Literal-0.02-0/blib/lib
/tmp/loop_over_bdir-18089-GuLbqk/Tie-Simple-1.04-0/blib/arch
/tmp/loop_over_bdir-18089-GuLbqk/Tie-Simple-1.04-0/blib/lib
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.18.4/2d7c/lib/site_perl/5.18.4/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.18.4/2d7c/lib/site_perl/5.18.4
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.18.4/2d7c/lib/5.18.4/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.18.4/2d7c/lib/5.18.4
.