Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Config-Simple-Extended-0.12 v5.14.3 OpenBSD
Date: 2013-09-06T05:48:26Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear HESCO,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9142. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 /home/cpan/pit/thr/perl-5.14.3/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Config::Simple::Extended;'
# at t/00-load.t line 8.
# Tried to use 'Config::Simple::Extended'.
# Error: Can't locate File/PathInfo.pm in @INC (@INC contains: /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/t/../../../local/lib/perl5 lib local/lib/perl5 /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/arch /home/cpan/pit/thr/perl-5.14.3/lib/site_perl/5.14.3/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.14.3/lib/site_perl/5.14.3 /home/cpan/pit/thr/perl-5.14.3/lib/5.14.3/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.14.3/lib/5.14.3 .) at lib/Config/Simple/Extended.pm line 11.
# BEGIN failed--compilation aborted at lib/Config/Simple/Extended.pm line 11.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
Use of uninitialized value $Config::Simple::Extended::VERSION in concatenation (.) or string at t/00-load.t line 11.
# Testing Config::Simple::Extended , Perl 5.014003, /home/cpan/pit/thr/perl-5.14.3/bin/perl
# Looks like you failed 1 test of 1.
t/00-load.t ....................
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
# Failed test 'use Config::Simple::Extended;'
# at t/10_inherit.t line 14.
# Tried to use 'Config::Simple::Extended'.
# Error: Can't locate File/PathInfo.pm in @INC (@INC contains: /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/t/../../../local/lib/perl5 lib local/lib/perl5 . /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/arch /home/cpan/pit/thr/perl-5.14.3/lib/site_perl/5.14.3/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.14.3/lib/site_perl/5.14.3 /home/cpan/pit/thr/perl-5.14.3/lib/5.14.3/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.14.3/lib/5.14.3) at lib/Config/Simple/Extended.pm line 11.
# BEGIN failed--compilation aborted at lib/Config/Simple/Extended.pm line 11.
# Compilation failed in require at (eval 8) line 2.
# BEGIN failed--compilation aborted at (eval 8) line 2.
# Failed test 'Config::Simple::Extended->can('inherit')'
# at t/10_inherit.t line 19.
# Config::Simple::Extended->can('inherit') failed
Can't locate auto/Config/Simple/Extended/inherit.al in @INC (@INC contains: /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/t/../../../local/lib/perl5 lib local/lib/perl5 . /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/arch /home/cpan/pit/thr/perl-5.14.3/lib/site_perl/5.14.3/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.14.3/lib/site_perl/5.14.3 /home/cpan/pit/thr/perl-5.14.3/lib/5.14.3/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.14.3/lib/5.14.3) at t/10_inherit.t line 32
# Looks like you failed 2 tests of 4.
# Looks like your test exited with 2 just after 4.
t/10_inherit.t .................
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/4 subtests
# Failed test 'use Config::Simple::Extended;'
# at t/11_parse_url_for_cfg_path.t line 8.
# Tried to use 'Config::Simple::Extended'.
# Error: Can't locate File/PathInfo.pm in @INC (@INC contains: /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/t/../../../local/lib/perl5 lib local/lib/perl5 /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/arch /home/cpan/pit/thr/perl-5.14.3/lib/site_perl/5.14.3/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.14.3/lib/site_perl/5.14.3 /home/cpan/pit/thr/perl-5.14.3/lib/5.14.3/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.14.3/lib/5.14.3 .) at lib/Config/Simple/Extended.pm line 11.
# BEGIN failed--compilation aborted at lib/Config/Simple/Extended.pm line 11.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
# Failed test 'Config::Simple::Extended->can('inherit')'
# at t/11_parse_url_for_cfg_path.t line 15.
# Config::Simple::Extended->can('inherit') failed
# Failed test 'Config::Simple::Extended->can('parse_url_for_config_path')'
# at t/11_parse_url_for_cfg_path.t line 15.
# Config::Simple::Extended->can('parse_url_for_config_path') failed
Can't locate auto/Config/Simple/Extended/parse_url_f.al in @INC (@INC contains: /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/t/../../../local/lib/perl5 lib local/lib/perl5 /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/arch /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/lib /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/arch /home/cpan/pit/thr/perl-5.14.3/lib/site_perl/5.14.3/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.14.3/lib/site_perl/5.14.3 /home/cpan/pit/thr/perl-5.14.3/lib/5.14.3/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.14.3/lib/5.14.3 .) at t/11_parse_url_for_cfg_path.t line 23
# Looks like you planned 6 tests but ran 3.
# Looks like you failed 3 tests of 3 run.
# Looks like your test exited with 2 just after 3.
t/11_parse_url_for_cfg_path.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 6/6 subtests
t/boilerplate.t ................ ok
t/pod-coverage.t ............... skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.t ........................ skipped: Test::Pod 1.14 required for testing POD
Test Summary Report
-------------------
t/00-load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/10_inherit.t (Wstat: 512 Tests: 4 Failed: 2)
Failed tests: 2-3
Non-zero exit status: 2
t/11_parse_url_for_cfg_path.t (Wstat: 512 Tests: 3 Failed: 3)
Failed tests: 1-3
Non-zero exit status: 2
Parse errors: Bad plan. You planned 6 tests but ran 3.
Files=6, Tests=11, 0 wallclock secs ( 0.04 usr 0.01 sys + 0.12 cusr 0.05 csys = 0.22 CPU)
Result: FAIL
Failed 3/6 test programs. 6/11 subtests failed.
*** Error 255 in /home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12 (Makefile:843 'test_dynamic')
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
File::PathInfo
auto::Config::Simple::Extended::inherit.al
auto::Config::Simple::Extended::parse_url_f.al
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'HESCO (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'File::PathInfo' => '0', # or a minimum working version
'auto::Config::Simple::Extended::inherit.al' => '0', # or a minimum working version
'auto::Config::Simple::Extended::parse_url_f.al' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Config::Simple 4.58 0
Data::Dumper 2.130_02 0
ExtUtils::MakeMaker 6.74 0
Test 1.25_02 0
Test::Deep 0.110 0
Test::More 0.98 0
Text::ParseWords 3.27 0
UNIVERSAL 1.08 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9142
CPANPLUS::Dist::Build 0.70
Cwd 3.40
ExtUtils::CBuilder 0.280205
ExtUtils::Command 1.17
ExtUtils::Install 1.56
ExtUtils::MakeMaker 6.74
ExtUtils::Manifest 1.61
ExtUtils::ParseXS 3.22
File::Spec 3.40
Module::Build 0.4007
Pod::Parser 1.37
Pod::Simple 3.16
Test::Harness 3.28
Test::More 0.98
version 0.9903
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.90.
Powered by minismokebox version 0.56
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = :/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/lib:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/arch:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/lib:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/arch:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/lib:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/arch:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/lib:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/arch:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/lib:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 7495
PERL5_CPANPLUS_IS_VERSION = 0.9142
PERL5_MINISMOKEBOX = 0.56
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.14.3
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.14.3/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 14 subversion 3) configuration:
Platform:
osname=openbsd, osvers=5.3, archname=OpenBSD.amd64-openbsd-thread-multi
uname='openbsd onkel.bingosnet.co.uk 5.3 generic#53 amd64 '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.14.3 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 ', gccosandvers='openbsd5.3'
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.66.2, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY MYMALLOC PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under openbsd
Compiled at May 2 2013 19:22:19
%ENV:
PERL5LIB=":/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/lib:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/arch:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/lib:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/arch:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/lib:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/arch:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/lib:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/arch:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/lib:/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="7495"
PERL5_CPANPLUS_IS_VERSION="0.9142"
PERL5_MINISMOKEBOX="0.56"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.14.3"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/lib
/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-4.58/blib/arch
/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/lib
/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Tester-0.109/blib/arch
/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/lib
/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-NoWarnings-1.04/blib/arch
/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/lib
/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Test-Deep-0.110/blib/arch
/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/lib
/home/cpan/pit/thr/conf/perl-5.14.3/.cpanplus/5.14.3/build/Config-Simple-Extended-0.12/blib/arch
/home/cpan/pit/thr/perl-5.14.3/lib/site_perl/5.14.3/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/thr/perl-5.14.3/lib/site_perl/5.14.3
/home/cpan/pit/thr/perl-5.14.3/lib/5.14.3/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/thr/perl-5.14.3/lib/5.14.3
.