Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL BioX-FedDB-0.01 v5.12.2 FreeBSD
Date: 2010-12-24T16:07:47Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear ROGERHALL,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9010. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Dec 24 16:07:47 2010] cp lib/BioX/FedDB/Base.pm blib/lib/BioX/FedDB/Base.pm
cp lib/BioX/FedDB.pm blib/lib/BioX/FedDB.pm
cp lib/BioX/FedDB/Server.pm blib/lib/BioX/FedDB/Server.pm
cp lib/BioX/FedDB/Client.pm blib/lib/BioX/FedDB/Client.pm
Manifying blib/man3/BioX::FedDB::Base.3
Manifying blib/man3/BioX::FedDB::Server.3
Manifying blib/man3/BioX::FedDB.3
Manifying blib/man3/BioX::FedDB::Client.3
[ERROR] [Fri Dec 24 16:07:47 2010] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/home/cpan/pit/64bit/perl-5.12.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use BioX::FedDB;'
# at t/00.load.t line 4.
# Tried to use 'BioX::FedDB'.
# Error: Can't locate Class/Std.pm in @INC (@INC contains: /usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/lib /usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/arch /usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/lib /usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/arch /usr/home/cpan/pit/64bit/perl-5.12.2/lib/site_perl/5.12.2/i386-freebsd-64int /usr/home/cpan/pit/64bit/perl-5.12.2/lib/site_perl/5.12.2 /usr/home/cpan/pit/64bit/perl-5.12.2/lib/5.12.2/i386-freebsd-64int /usr/home/cpan/pit/64bit/perl-5.12.2/lib/5.12.2 .) at /usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/lib/BioX/FedDB/Base.pm line 2.
# BEGIN failed--compilation aborted at /usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/lib/BioX/FedDB/Base.pm line 2.
# Compilation failed in require at (eval 6) line 2.
# ...propagated at /usr/home/cpan/pit/64bit/perl-5.12.2/lib/5.12.2/base.pm line 94.
# BEGIN failed--compilation aborted at /usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/lib/BioX/FedDB.pm line 2.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
# Failed test 'use BioX::FedDB::Base;'
# at t/00.load.t line 5.
# Tried to use 'BioX::FedDB::Base'.
# Error: Attempt to reload BioX/FedDB/Base.pm aborted.
# Compilation failed in require at (eval 7) line 2.
# BEGIN failed--compilation aborted at (eval 7) line 2.
# Failed test 'use BioX::FedDB::Client;'
# at t/00.load.t line 6.
# Tried to use 'BioX::FedDB::Client'.
# Error: Attempt to reload BioX/FedDB/Base.pm aborted.
# Compilation failed in require at (eval 9) line 2.
# ...propagated at /usr/home/cpan/pit/64bit/perl-5.12.2/lib/5.12.2/base.pm line 94.
# BEGIN failed--compilation aborted at /usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/lib/BioX/FedDB/Client.pm line 2.
# Compilation failed in require at (eval 8) line 2.
# BEGIN failed--compilation aborted at (eval 8) line 2.
# Failed test 'use BioX::FedDB::Server;'
# at t/00.load.t line 7.
# Tried to use 'BioX::FedDB::Server'.
# Error: Attempt to reload BioX/FedDB/Base.pm aborted.
# Compilation failed in require at (eval 11) line 2.
# ...propagated at /usr/home/cpan/pit/64bit/perl-5.12.2/lib/5.12.2/base.pm line 94.
# BEGIN failed--compilation aborted at /usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/lib/BioX/FedDB/Server.pm line 2.
# Compilation failed in require at (eval 10) line 2.
# BEGIN failed--compilation aborted at (eval 10) line 2.
Use of uninitialized value $BioX::FedDB::VERSION in concatenation (.) or string at t/00.load.t line 10.
# Testing BioX::FedDB
Use of uninitialized value $BioX::FedDB::Base::VERSION in concatenation (.) or string at t/00.load.t line 11.
# Testing BioX::FedDB::Base
Use of uninitialized value $BioX::FedDB::Client::VERSION in concatenation (.) or string at t/00.load.t line 12.
# Testing BioX::FedDB::Client
Use of uninitialized value $BioX::FedDB::Server::VERSION in concatenation (.) or string at t/00.load.t line 13.
# Testing BioX::FedDB::Server
# Looks like you failed 4 tests of 4.
t/00.load.t ..
Dubious, test returned 4 (wstat 1024, 0x400)
Failed 4/4 subtests
Test Summary Report
-------------------
t/00.load.t (Wstat: 1024 Tests: 4 Failed: 4)
Failed tests: 1-4
Non-zero exit status: 4
Files=1, Tests=4, 0 wallclock secs ( 0.04 usr 0.02 sys + 0.05 cusr 0.01 csys = 0.11 CPU)
Result: FAIL
Failed 1/1 test programs. 4/4 subtests failed.
*** Error code 4
Stop in /usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB.
[MSG] [Fri Dec 24 16:07:47 2010] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Class::Std
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'ROGERHALL (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Class::Std' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Test::More 0.96 0
version 0.87 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9010
CPANPLUS::Dist::Build 0.50
Cwd 3.33
ExtUtils::CBuilder 0.2801
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.56
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2206
File::Spec 3.33
Module::Build 0.3607
Test::Harness 3.22
Test::More 0.96
version 0.87
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.58.
Powered by minismokebox version 0.40
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/lib:/usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 65842
PERL5_CPANPLUS_IS_VERSION = 0.9010
PERL5_MINISMOKEBOX = 0.40
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/64bit/conf/perl-5.12.2
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/64bit/perl-5.12.2/bin/perl
UID: $< = 1003
EUID: $> = 1003
GID: $( = 1003 1003 1003
EGID: $) = 1003 1003 1003
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 2) configuration:
Platform:
osname=freebsd, osvers=7.2-release, archname=i386-freebsd-64int
uname='freebsd wintermute.staffordshire.gov.uk 7.2-release freebsd 7.2-release #0: fri may 1 08:49:13 utc 2009 root@walker.cse.buffalo.edu:usrobjusrsrcsysgeneric i386 '
config_args='-des -Dprefix=/usr/home/cpan/pit/64bit/perl-5.12.2 -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 [FreeBSD]', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP USE_64_BIT_INT
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
Built under freebsd
Compiled at Sep 8 2010 21:36:11
%ENV:
PERL5LIB=":/usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/lib:/usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="65842"
PERL5_CPANPLUS_IS_VERSION="0.9010"
PERL5_MINISMOKEBOX="0.40"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/64bit/conf/perl-5.12.2"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/lib
/usr/home/cpan/pit/64bit/conf/perl-5.12.2/.cpanplus/5.12.2/build/BioX-FedDB/blib/arch
/usr/home/cpan/pit/64bit/perl-5.12.2/lib/site_perl/5.12.2/i386-freebsd-64int
/usr/home/cpan/pit/64bit/perl-5.12.2/lib/site_perl/5.12.2
/usr/home/cpan/pit/64bit/perl-5.12.2/lib/5.12.2/i386-freebsd-64int
/usr/home/cpan/pit/64bit/perl-5.12.2/lib/5.12.2
.