Back
From: metabase:user:e3434da8-b236-11df-85ca-0247c6d74bde
Subject: FAIL RTF-Parser-1.07 v5.13.8 GNU/Linux
Date: 2011-01-09T16:10:16Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Philippe Verdret,
This is a computer-generated report for RTF-Parser-1.07
on perl 5.13.8, created by CPAN-Reporter-1.1803.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/tester/vers/perl-5.13.8/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Bareword "Carp::confess" not allowed while "strict subs" in use at /home/tester/cpan/perl-5.13.8/.cpan/build/RTF-Parser-1.07-M6Lp00/blib/lib/RTF/Parser.pm line 15.
BEGIN not safe after errors--compilation aborted at /home/tester/cpan/perl-5.13.8/.cpan/build/RTF-Parser-1.07-M6Lp00/blib/lib/RTF/Parser.pm line 112.
Compilation failed in require at /home/tester/cpan/perl-5.13.8/.cpan/build/RTF-Parser-1.07-M6Lp00/blib/lib/RTF/Control.pm line 16.
BEGIN failed--compilation aborted at /home/tester/cpan/perl-5.13.8/.cpan/build/RTF-Parser-1.07-M6Lp00/blib/lib/RTF/Control.pm line 16.
Compilation failed in require at /home/tester/cpan/perl-5.13.8/.cpan/build/RTF-Parser-1.07-M6Lp00/blib/lib/RTF/HTML/Converter.pm line 5.
BEGIN failed--compilation aborted at /home/tester/cpan/perl-5.13.8/.cpan/build/RTF-Parser-1.07-M6Lp00/blib/lib/RTF/HTML/Converter.pm line 5.
Compilation failed in require at t/t1.t line 1.
BEGIN failed--compilation aborted at t/t1.t line 1.
t/t1.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Test Summary Report
-------------------
t/t1.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=1, Tests=0, 0 wallclock secs ( 0.02 usr + 0.01 sys = 0.03 CPU)
Result: FAIL
Failed 1/1 test programs. 0/0 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
build_requires:
Module Need Have
------------------- ---- -------
ExtUtils::MakeMaker 0 6.57_05
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LC_COLLATE = C
LC_MONETARY = nl_NL.utf8
PATH = /home/tester/perl5/perlbrew/bin:/home/tester/perl5/perlbrew/perls/current/bin:/home/tester/perl5/perlbrew/bin:/home/tester/perl5/perlbrew/perls/current/bin:/usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/tester/bin
PERL5LIB = /home/tester/cpan/perl-5.13.8/.cpan/build/LEOCHARRE-Dir-1.08-qOQm_P/blib/arch:/home/tester/cpan/perl-5.13.8/.cpan/build/LEOCHARRE-Dir-1.08-qOQm_P/blib/lib:/home/tester/cpan/perl-5.13.8/.cpan/build/Spreadsheet-ParseExcel-0.58-7aLCpt/blib/arch:/home/tester/cpan/perl-5.13.8/.cpan/build/Spreadsheet-ParseExcel-0.58-7aLCpt/blib/lib:/home/tester/cpan/perl-5.13.8/.cpan/build/OLE-Storage_Lite-0.19-IRIlfO/blib/arch:/home/tester/cpan/perl-5.13.8/.cpan/build/OLE-Storage_Lite-0.19-IRIlfO/blib/lib:/home/tester/cpan/perl-5.13.8/.cpan/build/IO-stringy-2.110-Ikzhzc/blib/arch:/home/tester/cpan/perl-5.13.8/.cpan/build/IO-stringy-2.110-Ikzhzc/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 20915
PERL5_CPAN_IS_RUNNING = 20915
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 18463,20915
PERL_CR_SMOKER_CURRENT = Zack-1.08
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/tester/vers/perl-5.13.8/bin/perl
$UID/$EUID = 501 / 501
$GID = 501 501
$EGID = 501 501
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.94_62
Cwd 3.35
ExtUtils::CBuilder 0.280201
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.57_05
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2208
File::Spec 3.33
Module::Build 0.3607
Module::Signature n/a
Test::Harness 3.22
Test::More 0.97_01
YAML n/a
YAML::Syck 1.17
version 0.87
--
Summary of my perl5 (revision 5 version 13 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.35.9-64.fc14.x86_64, archname=x86_64-linux-thread-multi-ld
uname='linux firenze.localhost 2.6.35.9-64.fc14.x86_64 #1 smp fri dec 3 12:19:41 utc 2010 x86_64 x86_64 x86_64 gnulinux '
config_args='-Dprefix=/home/tester/vers/perl-5.13.8 -Dusethreads -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.5.1 20100924 (Red Hat 4.5.1-4)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64 /usr/local/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.12.90'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_FAST_STDIO USE_ITHREADS
USE_LARGE_FILES USE_LONG_DOUBLE USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Built under linux
Compiled at Dec 20 2010 14:25:04
%ENV:
PERL5LIB="/home/tester/cpan/perl-5.13.8/.cpan/build/LEOCHARRE-Dir-1.08-qOQm_P/blib/arch:/home/tester/cpan/perl-5.13.8/.cpan/build/LEOCHARRE-Dir-1.08-qOQm_P/blib/lib:/home/tester/cpan/perl-5.13.8/.cpan/build/Spreadsheet-ParseExcel-0.58-7aLCpt/blib/arch:/home/tester/cpan/perl-5.13.8/.cpan/build/Spreadsheet-ParseExcel-0.58-7aLCpt/blib/lib:/home/tester/cpan/perl-5.13.8/.cpan/build/OLE-Storage_Lite-0.19-IRIlfO/blib/arch:/home/tester/cpan/perl-5.13.8/.cpan/build/OLE-Storage_Lite-0.19-IRIlfO/blib/lib:/home/tester/cpan/perl-5.13.8/.cpan/build/IO-stringy-2.110-Ikzhzc/blib/arch:/home/tester/cpan/perl-5.13.8/.cpan/build/IO-stringy-2.110-Ikzhzc/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="20915"
PERL5_CPAN_IS_RUNNING="20915"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="18463,20915"
PERL_CR_SMOKER_CURRENT="Zack-1.08"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/tester/cpan/perl-5.13.8/.cpan/build/LEOCHARRE-Dir-1.08-qOQm_P/blib/arch
/home/tester/cpan/perl-5.13.8/.cpan/build/LEOCHARRE-Dir-1.08-qOQm_P/blib/lib
/home/tester/cpan/perl-5.13.8/.cpan/build/Spreadsheet-ParseExcel-0.58-7aLCpt/blib/arch
/home/tester/cpan/perl-5.13.8/.cpan/build/Spreadsheet-ParseExcel-0.58-7aLCpt/blib/lib
/home/tester/cpan/perl-5.13.8/.cpan/build/OLE-Storage_Lite-0.19-IRIlfO/blib/arch
/home/tester/cpan/perl-5.13.8/.cpan/build/OLE-Storage_Lite-0.19-IRIlfO/blib/lib
/home/tester/cpan/perl-5.13.8/.cpan/build/IO-stringy-2.110-Ikzhzc/blib/arch
/home/tester/cpan/perl-5.13.8/.cpan/build/IO-stringy-2.110-Ikzhzc/blib/lib
/home/tester/vers/perl-5.13.8/lib/site_perl/5.13.8/x86_64-linux-thread-multi-ld
/home/tester/vers/perl-5.13.8/lib/site_perl/5.13.8
/home/tester/vers/perl-5.13.8/lib/5.13.8/x86_64-linux-thread-multi-ld
/home/tester/vers/perl-5.13.8/lib/5.13.8
.