Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Code-Generator-Perl-0.03 v5.12.0 FreeBSD
Date: 2011-09-10T17:47:07Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear NAZRI,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9110. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sat Sep 10 18:46:14 2011] cp lib/Code/Generator/Perl.pm blib/lib/Code/Generator/Perl.pm
Manifying blib/man3/Code::Generator::Perl.3
[ERROR] [Sat Sep 10 18:46:15 2011] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/home/cpan/pit/bare/perl-5.12.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# You can safely ignore the following error message:
Bareword found where operator expected at t/tmp/Broken.pm line 9, near "$broken var"
(Missing operator before var?)
Error while generating t/tmp/Broken.pm:
syntax error at t/tmp/Broken.pm line 9, near "$broken var name "
Compilation failed in require at (eval 17) line 1.
BEGIN failed--compilation aborted at (eval 17) line 1.
# You can now go back to not-ignoring any error messages from here onwards.
Error while generating t/tmp/PackageReadonly.pm:
Can't locate Readonly.pm in @INC (@INC contains: t/tmp /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03/blib/arch /usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0/i386-freebsd /usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0 /usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0/i386-freebsd /usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0 .) at t/tmp/PackageReadonly.pm line 5.
BEGIN failed--compilation aborted at t/tmp/PackageReadonly.pm line 5.
Compilation failed in require at (eval 25) line 1.
BEGIN failed--compilation aborted at (eval 25) line 1.
# Failed test 'Generate PackageReadonly'
# at t/Code-Generator-Perl.t line 158.
Error while generating t/tmp/VariableReadonly.pm:
Can't locate Readonly.pm in @INC (@INC contains: t/tmp /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03/blib/arch /usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0/i386-freebsd /usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0 /usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0/i386-freebsd /usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0 .) at t/tmp/VariableReadonly.pm line 5.
BEGIN failed--compilation aborted at t/tmp/VariableReadonly.pm line 5.
Compilation failed in require at (eval 29) line 1.
BEGIN failed--compilation aborted at (eval 29) line 1.
# Failed test 'Generate VariableReadonly'
# at t/Code-Generator-Perl.t line 219.
Error while generating t/tmp/VariableOverrideGlobalReadonly.pm:
Can't locate Readonly.pm in @INC (@INC contains: t/tmp /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03/blib/arch /usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0/i386-freebsd /usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0 /usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0/i386-freebsd /usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0 .) at t/tmp/VariableOverrideGlobalReadonly.pm line 5.
BEGIN failed--compilation aborted at t/tmp/VariableOverrideGlobalReadonly.pm line 5.
Compilation failed in require at (eval 31) line 1.
BEGIN failed--compilation aborted at (eval 31) line 1.
# Failed test 'Generate VariableOverrideGlobalReadonly'
# at t/Code-Generator-Perl.t line 258.
Error while generating t/tmp/PackageOverrideGlobalReadonly.pm:
Can't locate Readonly.pm in @INC (@INC contains: t/tmp /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03/blib/arch /usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0/i386-freebsd /usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0 /usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0/i386-freebsd /usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0 .) at t/tmp/PackageOverrideGlobalReadonly.pm line 5.
BEGIN failed--compilation aborted at t/tmp/PackageOverrideGlobalReadonly.pm line 5.
Compilation failed in require at (eval 33) line 1.
BEGIN failed--compilation aborted at (eval 33) line 1.
# Failed test 'Generate PackageOverrideGlobalReadonly'
# at t/Code-Generator-Perl.t line 290.
# Looks like you failed 4 tests of 28.
t/Code-Generator-Perl.t ..
Dubious, test returned 4 (wstat 1024, 0x400)
Failed 4/28 subtests
Test Summary Report
-------------------
t/Code-Generator-Perl.t (Wstat: 1024 Tests: 28 Failed: 4)
Failed tests: 17, 21, 23, 25
Non-zero exit status: 4
Files=1, Tests=28, 1 wallclock secs ( 0.01 usr 0.05 sys + 0.20 cusr 0.33 csys = 0.59 CPU)
Result: FAIL
*** Error code 4
Stop in /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03.
Failed 1/1 test programs. 4/28 subtests failed.
[MSG] [Sat Sep 10 18:46:15 2011] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Readonly
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'NAZRI (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Readonly' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Data::Dumper 2.125 2.121
ExtUtils::MakeMaker 6.59 0
File::Path 2.08_01 2.07
File::Spec 3.33 3.29
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9110
CPANPLUS::Dist::Build 0.58
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.59
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.04
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.94
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.64.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 67678
PERL5_CPANPLUS_IS_VERSION = 0.9110
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.12.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.12.0/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002 1002
EGID: $) = 1002 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 0) configuration:
Platform:
osname=freebsd, osvers=7.4-release, archname=i386-freebsd
uname='freebsd fulcrum.bingosnet.co.uk 7.4-release freebsd 7.4-release #0: thu feb 17 03:51:56 utc 2011 root@walker.cse.buffalo.edu:usrobjusrsrcsysgeneric i386 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.12.0'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 [FreeBSD]', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
Built under freebsd
Compiled at Sep 7 2011 20:43:23
%ENV:
PERL5LIB=":/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="67678"
PERL5_CPANPLUS_IS_VERSION="0.9110"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.12.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Code-Generator-Perl-0.03/blib/arch
/usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0/i386-freebsd
/usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0
/usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0/i386-freebsd
/usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0
.