Set-Toolkit v0.01 Perl 5 v5.8.8 x86_64-linux
- Status
- Unknown
- From
- Apocalypse (APOCAL)
- Dist
-
Set-Toolkit v0.01
- Platform
- Perl 5 v5.8.8 x86_64-linux
- Date
- 2010-04-28 08:27:34
- ID
- e56a0fd2-529f-11df-a5d8-c5537b45d684
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear SIRROBERT,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9003. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'fetch':
[MSG] [Wed Apr 28 01:27:32 2010] Trying to get 'ftp://192.168.0.200/CPAN/authors/id/S/SI/SIRROBERT/Set-Toolkit-0.01.tar.gz'
[MSG] [Wed Apr 28 01:27:32 2010] Trying to get 'ftp://192.168.0.200/CPAN/authors/id/S/SI/SIRROBERT/CHECKSUMS'
[MSG] [Wed Apr 28 01:27:33 2010] Archive size is not known for 'Set-Toolkit-0.01.tar.gz'
[MSG] [Wed Apr 28 01:27:33 2010] No 'md5' checksum known for 'Set-Toolkit-0.01.tar.gz'
[MSG] [Wed Apr 28 01:27:33 2010] Extracted 'Set::Toolkit' to '/home/cpan/cpanp_conf/perl_5.8.8_default/.cpanplus/5.8.8/build/Set-Toolkit-0.01'
[MSG] [Wed Apr 28 01:27:33 2010] CPANPLUS is prefering Build.PL
[MSG] [Wed Apr 28 01:27:33 2010] Loading YACSmoke database "/home/cpan/cpanp_conf/perl_5.8.8_default/.cpanplus/cpansmoke.dat"
[ERROR] [Wed Apr 28 01:27:33 2010] Build.PL failed: Can't determine distribution version, must supply either 'dist_version',
'dist_version_from', or 'module_name' parameter at /home/cpan/perls/perl_5.8.8_default/lib/site_perl/5.8.8/Module/Build/Base.pm line 1150.
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9003
CPANPLUS::Dist::Build 0.46
Cwd 3.31
ExtUtils::CBuilder 0.2703
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.56
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2205
File::Spec 3.31
Module::Build 0.3607
Test::Harness 3.21
Test::More 0.94
version 0.80
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.54.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PERL5_CPANIDX_URL = http://192.168.0.200:11110/CPANIDX/
PERL5_CPANPLUS_IS_RUNNING = 7771
PERL5_CPANPLUS_IS_VERSION = 0.9003
PERL5_YACSMOKE_BASE = /home/cpan/cpanp_conf/perl_5.8.8_default
PERL_CPANSMOKER_HOST = perl_5.8.8_default / Ubuntu 9.10 server 64bit (192.168.0.202)
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perls/perl_5.8.8_default/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.31-14-server, archname=x86_64-linux
uname='linux ubuntu-server64 2.6.31-14-server #48-ubuntu smp fri oct 16 15:07:34 utc 2009 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/perls/perl_5.8.8_default -Ui_db'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.4.1', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.10.1.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.10.1'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_LARGE_FILES USE_PERLIO
Built under linux
Compiled at Apr 1 2010 19:06:16
%ENV:
PERL5_CPANIDX_URL="http://192.168.0.200:11110/CPANIDX/"
PERL5_CPANPLUS_IS_RUNNING="7771"
PERL5_CPANPLUS_IS_VERSION="0.9003"
PERL5_YACSMOKE_BASE="/home/cpan/cpanp_conf/perl_5.8.8_default"
PERL_CPANSMOKER_HOST="perl_5.8.8_default / Ubuntu 9.10 server 64bit (192.168.0.202)"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/perls/perl_5.8.8_default/lib/5.8.8/x86_64-linux
/home/cpan/perls/perl_5.8.8_default/lib/5.8.8
/home/cpan/perls/perl_5.8.8_default/lib/site_perl/5.8.8/x86_64-linux
/home/cpan/perls/perl_5.8.8_default/lib/site_perl/5.8.8
/home/cpan/perls/perl_5.8.8_default/lib/site_perl
.