XML-SimpleObject v0.53 Perl 5 v5.13.1 i686-linux-thread-multi
- Status
- Unknown
- From
- Serguei Trouchelle (STRO)
- Dist
-
XML-SimpleObject v0.53
- Platform
- Perl 5 v5.13.1 i686-linux-thread-multi
- Date
- 2010-06-07 11:00:10
- ID
- d77cc4ca-7223-11df-a940-88f431f0e683
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Danny Brian,
This is a computer-generated report for XML-SimpleObject-0.53
on perl 5.13.1, created by CPAN-Reporter-1.1711.
Thank you for uploading your work to CPAN. However, attempting to
test your distribution gave an inconclusive result.
This could be because your distribution had an error during the make/build
stage, did not define tests, tests could not be found, because your tests were
interrupted before they finished, or because the results of the tests could not
be parsed. You may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/home/stro/perl5131th/bin/perl Makefile.PL':
NOTE: XML::SimpleObject requires XML::Parser. If you have XML::LibXML, you
can install XML::SimpleObject::LibXML instead.
Checking for XML::Parser ...
OK
Checking if your kit is complete...
Looks good
Writing Makefile for XML::SimpleObject::Enhanced
NOTE: XML::SimpleObject::LibXML requires XML::LibXML. If you have XML::Parser
you can install XML::SimpleObject instead.
Checking for XML::LibXML ...
ERROR from evaluation of /home/stro/cpan/build/5.13.1-th/XML-SimpleObject0.53-apDVe0/LibXML/Makefile.PL: Can't locate XML/LibXML.pm in @INC (@INC contains: /tmp/CPAN-Reporter-lib-NUIk /home/stro/perl5131th/lib/site_perl/5.13.1/i686-linux-thread-multi /home/stro/perl5131th/lib/site_perl/5.13.1 /home/stro/perl5131th/lib/5.13.1/i686-linux-thread-multi /home/stro/perl5131th/lib/5.13.1 /home/stro/cpan/build/5.13.1-th/XML-SimpleObject0.53-apDVe0 .) at ./Makefile.PL line 8.
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /usr/local/bin:/usr/bin:/bin:/usr/games
PERL5LIB =
PERL5OPT = -I/tmp/CPAN-Reporter-lib-NUIk -MDevel::Autoflush
PERL5_CPANPLUS_IS_RUNNING = 20437
PERL5_CPAN_IS_EXECUTING = /home/stro/cpan/build/5.13.1-th/XML-SimpleObject0.53-apDVe0/Makefile.PL
PERL5_CPAN_IS_RUNNING = 20437
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 513,20437
PERL_AUTOINSTALL = --defaultdeps
PERL_CR_SMOKER_CURRENT = DBIx-QueryByName-0.16
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/stro/perl5131th/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 20 24 25 29 44 46 1000
$EGID = 1000 20 24 25 29 44 46 1000
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.94_57
Cwd 3.31
ExtUtils::CBuilder 0.27
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.5601
ExtUtils::Manifest 1.57
ExtUtils::ParseXS 2.2205
File::Spec 3.31
Module::Build 0.3607
Module::Signature 0.64
Test::Harness 3.17
Test::More 0.95_02
YAML 0.71
YAML::Syck 1.09
version 0.82
--
Summary of my perl5 (revision 5 version 13 subversion 1) configuration:
Platform:
osname=linux, osvers=2.6.26-2-686, archname=i686-linux-thread-multi
uname='linux debian5 2.6.26-2-686 #1 smp wed may 12 21:56:10 utc 2010 i686 gnulinux '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.3.2', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_ITHREADS
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under linux
Compiled at Jun 2 2010 15:19:43
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="20437"
PERL5_CPAN_IS_EXECUTING="/home/stro/cpan/build/5.13.1-th/XML-SimpleObject0.53-apDVe0/Makefile.PL"
PERL5_CPAN_IS_RUNNING="20437"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="513,20437"
PERL_AUTOINSTALL="--defaultdeps"
PERL_CR_SMOKER_CURRENT="DBIx-QueryByName-0.16"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/stro/perl5131th/lib/site_perl/5.13.1/i686-linux-thread-multi
/home/stro/perl5131th/lib/site_perl/5.13.1
/home/stro/perl5131th/lib/5.13.1/i686-linux-thread-multi
/home/stro/perl5131th/lib/5.13.1
.