DataStore-CAS v0.06 Perl 5 v5.14.3 amd64-freebsd
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
DataStore-CAS v0.06
- Platform
- Perl 5 v5.14.3 amd64-freebsd
- Date
- 2022-12-25 22:45:31
- ID
- d61321a4-84a5-11ed-aba6-9a79f339625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear NERDVANA,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/bare/perl-5.14.3/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing on Perl 5.014003, /usr/home/cpan/pit/bare/perl-5.14.3/bin/perl
# DataStore::CAS 0.06
# DataStore::CAS::File 0.06
# DataStore::CAS::VirtualHandle 0.06
# DataStore::CAS::FileCreatorHandle 0.06
# DataStore::CAS::Virtual 0.06
# DataStore::CAS::Simple 0.06
t/00-load.t ................ ok
t/05-cas-fileobj.t ......... ok
t/06-cas-handleobj.t ....... ok
t/10-store-virtual.t ....... ok
t/11-store-simple.t ........
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/2 subtests
# Failed test 'DataStore::CAS::Simple->new() died'
# at t/11-store-simple.t line 67.
# Error was: Can't locate MRO/Compat.pm in @INC (@INC contains: /usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/mDSYtyJvV_/DataStore-CAS-0.06/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/mDSYtyJvV_/DataStore-CAS-0.06/blib/arch /usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5/5.14.3/amd64-freebsd /usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5/5.14.3/amd64-freebsd /usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5/5.14.3 /usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5/amd64-freebsd /usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5/5.14.3/amd64-freebsd /usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5/5.14.3 /usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5/amd64-freebsd /usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5 /usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5/5.14.3/amd64-freebsd /usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5/5.14.3 /usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5/amd64-freebsd /usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5 /usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/mDSYtyJvV_/DataStore-CAS-0.06/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/mDSYtyJvV_/DataStore-CAS-0.06/blib/arch /usr/home/cpan/pit/bare/perl-5.14.3/lib/site_perl/5.14.3/amd64-freebsd /usr/home/cpan/pit/bare/perl-5.14.3/lib/site_perl/5.14.3 /usr/home/cpan/pit/bare/perl-5.14.3/lib/5.14.3/amd64-freebsd /usr/home/cpan/pit/bare/perl-5.14.3/lib/5.14.3) at /usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/mDSYtyJvV_/DataStore-CAS-0.06/blib/lib/DataStore/CAS/Simple.pm line 127.
# open(cas_tmp/cas_store_simple/da/39a3ee5e6b4b0d3255bfef95601890afd80709): No such file or directory
# Failed test 'null hash exists and is empty'
# at t/11-store-simple.t line 70.
# got: undef
# expected: ''
# open(cas_tmp/cas_store_simple/conf/fanout): No such file or directory
# Failed test 'fanout file correctly written'
# at t/11-store-simple.t line 71.
# undef
# doesn't match '(?^:^2\r?\n$)'
# open(cas_tmp/cas_store_simple/conf/digest): No such file or directory
# Failed test 'digest file correctly written'
# at t/11-store-simple.t line 72.
# undef
# doesn't match '(?^:^SHA-1\r?\n$)'
# Looks like you failed 4 tests of 4.
# Failed test 'test_constructor'
# at t/11-store-simple.t line 97.
No such file or directory at t/11-store-simple.t line 74.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 just after 2.
t/12-virtual-filehandle.t .. skipped: Apply these tests to the splitting CAS module's handle object once written
t/author-pod-coverage.t .... skipped: these tests are for testing by the author
t/author-pod-syntax.t ...... skipped: these tests are for testing by the author
Test Summary Report
-------------------
t/11-store-simple.t (Wstat: 65280 (exited 255) Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=8, Tests=35, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.39 cusr 0.15 csys = 0.59 CPU)
Result: FAIL
*** Error code 255
Stop.
make: stopped in /usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/mDSYtyJvV_/DataStore-CAS-0.06
Failed 1/8 test programs. 1/35 subtests failed.
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
MRO::Compat
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'NERDVANA (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'MRO::Compat' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.20 0
Data::Dumper 2.130_02 0
Digest 1.16_01 1.16
Digest::SHA 6.03 0
ExtUtils::MakeMaker 7.64 0
File::Path 2.18 0
File::Spec 3.75 3.33
File::Spec::Functions 3.75 0
File::Temp 0.2311 0.22
File::stat 1.05 0
IO::File 1.15 0
Moo 2.005004 1.000007
Moo::Role 2.005004 0
Scalar::Util 1.23 0
Symbol 1.07 0
Test::More 1.302191 1
Try::Tiny 0.31 0
parent 0.225 0
strict 1.04 0
warnings 1.12 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.64
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.64
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.44
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.37
Pod::Simple 3.16
Test2 1.302191
Test::Harness 3.44
Test::More 1.302191
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C.UTF-8
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = /usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5:/usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/mDSYtyJvV_/DataStore-CAS-0.06/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/mDSYtyJvV_/DataStore-CAS-0.06/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 40008
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.14.3
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /usr/home/cpan/pit/jail/uEtMLNSU2s
PERL_MB_OPT = --install_base "/usr/home/cpan/pit/jail/uEtMLNSU2s"
PERL_MM_OPT = INSTALL_BASE=/usr/home/cpan/pit/jail/uEtMLNSU2s
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.14.3/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 14 subversion 3) configuration:
Platform:
osname=freebsd, osvers=13.1-release, archname=amd64-freebsd
uname='freebsd frantic 13.1-release freebsd 13.1-release releng13.1-n250148-fc952ac2212 generic amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.14.3'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='FreeBSD Clang 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 2.08
Built under freebsd
Compiled at Jul 24 2022 17:06:25
%ENV:
PERL5LIB="/usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5:/usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/mDSYtyJvV_/DataStore-CAS-0.06/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/mDSYtyJvV_/DataStore-CAS-0.06/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="40008"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.14.3"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/usr/home/cpan/pit/jail/uEtMLNSU2s"
PERL_MB_OPT="--install_base "/usr/home/cpan/pit/jail/uEtMLNSU2s""
PERL_MM_OPT="INSTALL_BASE=/usr/home/cpan/pit/jail/uEtMLNSU2s"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5/5.14.3/amd64-freebsd
/usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5/5.14.3
/usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5/amd64-freebsd
/usr/home/cpan/pit/jail/uEtMLNSU2s/lib/perl5
/usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/mDSYtyJvV_/DataStore-CAS-0.06/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.14.3/.cpanplus/5.14.3/build/mDSYtyJvV_/DataStore-CAS-0.06/blib/arch
/usr/home/cpan/pit/bare/perl-5.14.3/lib/site_perl/5.14.3/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.14.3/lib/site_perl/5.14.3
/usr/home/cpan/pit/bare/perl-5.14.3/lib/5.14.3/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.14.3/lib/5.14.3
.