Async-Stream v0.10 Perl 5 v5.18.3 amd64-freebsd-thread-multi
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Async-Stream v0.10
- Platform
- Perl 5 v5.18.3 amd64-freebsd-thread-multi
- Date
- 2017-09-01 01:49:38
- ID
- d0234b78-8eb7-11e7-a074-e1beba07c9dd
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear KSYSOEV,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9168. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/thr/perl-5.18.3/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Async::Stream::Pushable;'
# at t/00-load.t line 13.
# Tried to use 'Async::Stream::Pushable'.
# Error: Can't locate Async/Stream/Pushable.pm in @INC (you may need to install the Async::Stream::Pushable module) (@INC contains: /usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/lib /usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/arch /usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/lib /usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/arch /usr/home/cpan/pit/thr/perl-5.18.3/lib/site_perl/5.18.3/amd64-freebsd-thread-multi /usr/home/cpan/pit/thr/perl-5.18.3/lib/site_perl/5.18.3 /usr/home/cpan/pit/thr/perl-5.18.3/lib/5.18.3/amd64-freebsd-thread-multi /usr/home/cpan/pit/thr/perl-5.18.3/lib/5.18.3) at t/00-load.t line 13.
# BEGIN failed--compilation aborted at t/00-load.t line 13.
# Failed test 'use Async::Stream::FromArray;'
# at t/00-load.t line 14.
# Tried to use 'Async::Stream::FromArray'.
# Error: Can't locate Async/Stream/FromArray.pm in @INC (you may need to install the Async::Stream::FromArray module) (@INC contains: /usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/lib /usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/arch /usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/lib /usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/arch /usr/home/cpan/pit/thr/perl-5.18.3/lib/site_perl/5.18.3/amd64-freebsd-thread-multi /usr/home/cpan/pit/thr/perl-5.18.3/lib/site_perl/5.18.3 /usr/home/cpan/pit/thr/perl-5.18.3/lib/5.18.3/amd64-freebsd-thread-multi /usr/home/cpan/pit/thr/perl-5.18.3/lib/5.18.3) at t/00-load.t line 14.
# BEGIN failed--compilation aborted at t/00-load.t line 14.
# Testing Async::Stream 0.10, Perl 5.018003, /usr/home/cpan/pit/thr/perl-5.18.3/bin/perl
# Looks like you failed 2 tests of 5.
t/00-load.t .......
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/5 subtests
# Testing Async::Stream 0.10, Perl 5.018003, /usr/home/cpan/pit/thr/perl-5.18.3/bin/perl
t/10-item.t ....... ok
# Testing Async::Stream 0.10, Perl 5.018003, /usr/home/cpan/pit/thr/perl-5.18.3/bin/perl
t/20-iterator.t ... ok
Can't locate Async/Stream/FromArray.pm in @INC (you may need to install the Async::Stream::FromArray module) (@INC contains: /usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/lib /usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/arch /usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/lib /usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/arch /usr/home/cpan/pit/thr/perl-5.18.3/lib/site_perl/5.18.3/amd64-freebsd-thread-multi /usr/home/cpan/pit/thr/perl-5.18.3/lib/site_perl/5.18.3 /usr/home/cpan/pit/thr/perl-5.18.3/lib/5.18.3/amd64-freebsd-thread-multi /usr/home/cpan/pit/thr/perl-5.18.3/lib/5.18.3) at t/30-stream.t line 8.
BEGIN failed--compilation aborted at t/30-stream.t line 8.
t/30-stream.t .....
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/manifest.t ...... skipped: Author tests not required for installation
t/pod-coverage.t .. skipped: Author tests not required for installation
t/pod.t ........... skipped: Author tests not required for installation
Test Summary Report
-------------------
t/00-load.t (Wstat: 512 Tests: 5 Failed: 2)
Failed tests: 4-5
Non-zero exit status: 2
t/30-stream.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=7, Tests=14, 1 wallclock secs ( 0.05 usr 0.03 sys + 0.56 cusr 0.20 csys = 0.84 CPU)
Result: FAIL
Failed 2/7 test programs. 2/14 subtests failed.
*** Error code 255
Stop.
make: stopped in /usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Async::Stream::Pushable
Async::Stream::FromArray
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'KSYSOEV (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Async::Stream::Pushable' => '0', # or a minimum working version
'Async::Stream::FromArray' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.29 0
Scalar::Util 1.27 0
Test::More 1.302086 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9168
CPANPLUS::Dist::Build 0.88
Cwd 3.62
ExtUtils::CBuilder 0.280226
ExtUtils::Command 7.30
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.30
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.30
File::Spec 3.62
Module::Build 0.4224
Pod::Parser 1.60
Pod::Simple 3.28
Test2 1.302086
Test::Harness 3.39
Test::More 1.302086
version 0.9918
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.02.
Powered by minismokebox version 0.68
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 55951
PERL5_CPANPLUS_IS_VERSION = 0.9168
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/thr/conf/perl-5.18.3
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/thr/perl-5.18.3/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 18 subversion 3) configuration:
Platform:
osname=freebsd, osvers=11.1-release, archname=amd64-freebsd-thread-multi
uname='freebsd fforc 11.1-release freebsd 11.1-release #0 r321309: fri jul 21 02:08:28 utc 2017 root@releng2.nyi.freebsd.org:usrobjusrsrcsysgeneric amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/thr/perl-5.18.3 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 Compatible FreeBSD Clang 4.0.0 (tags/RELEASE_400/final 297347)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt -lutil
perllibs=-lm -lcrypt -lutil
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 1.48
Built under freebsd
Compiled at Jul 27 2017 12:15:55
%ENV:
PERL5LIB=":/usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="55951"
PERL5_CPANPLUS_IS_VERSION="0.9168"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/thr/conf/perl-5.18.3"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/lib
/usr/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/YnftOKPqYF/Async-Stream-0.10/blib/arch
/usr/home/cpan/pit/thr/perl-5.18.3/lib/site_perl/5.18.3/amd64-freebsd-thread-multi
/usr/home/cpan/pit/thr/perl-5.18.3/lib/site_perl/5.18.3
/usr/home/cpan/pit/thr/perl-5.18.3/lib/5.18.3/amd64-freebsd-thread-multi
/usr/home/cpan/pit/thr/perl-5.18.3/lib/5.18.3
.