Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Socket-Class-2.258 v5.24.2 RC1 GNU/Linux
Date: 2017-07-05T16:34:22Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Christian Mueller,
This is a computer-generated report for Socket-Class-2.258
on perl 5.24.2, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
"/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Class.bs blib/arch/auto/Socket/Class/Class.bs 644
make[1]: Entering directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs'
make[2]: Entering directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_const'
"/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Const.bs ../../blib/arch/auto/Socket/Class/Const/Const.bs 644
Manifying 1 pod document
make[2]: Leaving directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_const'
make[2]: Entering directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_ssl'
"/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SSL.bs ../../blib/arch/auto/Socket/Class/SSL/SSL.bs 644
"/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/bin/perl" "-I../../blib/arch" "-I../../blib/lib" install_files.PL install_files
Manifying 2 pod documents
make[2]: Leaving directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_ssl'
make[1]: Leaving directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs'
"/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/bin/perl" "-Iblib/arch" "-Iblib/lib" install_files.PL install_files
make[1]: Entering directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs'
make[2]: Entering directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_const'
"/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Const.bs ../../blib/arch/auto/Socket/Class/Const/Const.bs 644
Manifying 1 pod document
make[2]: Leaving directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_const'
make[2]: Entering directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_ssl'
"/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SSL.bs ../../blib/arch/auto/Socket/Class/SSL/SSL.bs 644
"/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/bin/perl" "-I../../blib/arch" "-I../../blib/lib" install_files.PL install_files
Manifying 2 pod documents
make[2]: Leaving directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_ssl'
make[2]: Entering directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_const'
"/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Const.bs ../../blib/arch/auto/Socket/Class/Const/Const.bs 644
No tests defined for Socket::Class::Const extension.
make[2]: Leaving directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_const'
make[2]: Entering directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_ssl'
"/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SSL.bs ../../blib/arch/auto/Socket/Class/SSL/SSL.bs 644
"/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/bin/perl" "-I../../blib/arch" "-I../../blib/lib" install_files.PL install_files
PERL_DL_NONLAZY=1 "/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../../blib/lib', '../../blib/arch')" t/*.t
Can't load '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_ssl/../../blib/arch/auto/Socket/Class/SSL/SSL.so' for module Socket::Class::SSL: /tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_ssl/../../blib/arch/auto/Socket/Class/SSL/SSL.so: undefined symbol: SSLv2_client_method at /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/lib/5.24.2/x86_64-linux-thread-multi-ld/DynaLoader.pm line 193.
at /tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_ssl/../../blib/lib/Socket/Class/SSL.pm line 22.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_ssl/../../blib/lib/Socket/Class/SSL.pm line 22.
Compilation failed in require at t/0_basic.t line 3.
t/0_basic.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
Can't load '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_ssl/../../blib/arch/auto/Socket/Class/SSL/SSL.so' for module Socket::Class::SSL: /tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_ssl/../../blib/arch/auto/Socket/Class/SSL/SSL.so: undefined symbol: SSLv2_client_method at /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/lib/5.24.2/x86_64-linux-thread-multi-ld/DynaLoader.pm line 193.
at /tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_ssl/../../blib/lib/Socket/Class/SSL.pm line 22.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_ssl/../../blib/lib/Socket/Class/SSL.pm line 22.
Compilation failed in require at t/1_fork.t line 5.
t/1_fork.t ...
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 5/5 subtests
Test Summary Report
-------------------
t/0_basic.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 1 tests but ran 0.
t/1_fork.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 5 tests but ran 0.
Files=2, Tests=0, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.03 cusr 0.00 csys = 0.07 CPU)
Result: FAIL
Failed 2/2 test programs. 0/0 subtests failed.
Makefile:820: recipe for target 'test_dynamic' failed
make[2]: *** [test_dynamic] Error 255
make[2]: Leaving directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs/sc_ssl'
Makefile:679: recipe for target 'subdirs-test_dynamic' failed
make[1]: *** [subdirs-test_dynamic] Error 2
make[1]: Leaving directory '/tmp/loop_over_bdir-27427-K8lxWg/Socket-Class-2.258-0/xs'
Makefile:1038: recipe for target 'subdirs-test_dynamic' failed
make: *** [subdirs-test_dynamic] Error 2
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
build_requires:
Module Need Have
------------------- ---- ----
ExtUtils::MakeMaker 0 7.30
configure_requires:
Module Need Have
------------------- ---- ----
ExtUtils::MakeMaker 0 7.30
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 27430
PERL5_CPAN_IS_RUNNING = 27430
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- ----------
CPAN 2.18
CPAN::Meta 2.150010
Cwd 3.63_01
ExtUtils::CBuilder 0.280225
ExtUtils::Command 7.30
ExtUtils::Install 2.06
ExtUtils::MakeMaker 7.30
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.31
File::Spec 3.63_01
JSON 2.94
JSON::PP 2.27300_01
Module::Build 0.4224
Module::Signature 0.81
Parse::CPAN::Meta 2.150010
Test::Harness 3.39
Test::More 1.302086
YAML 1.23
YAML::Syck 1.30
version 0.9916
--
Summary of my perl5 (revision 5 version 24 subversion 2) configuration:
Derived from: 4089b3b59843538aab75e779540bfc6eda8b6a10
Platform:
osname=linux, osvers=4.9.0-2-amd64, archname=x86_64-linux-thread-multi-ld
uname='linux k93msid 4.9.0-2-amd64 #1 smp debian 4.9.18-1 (2017-03-30) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1 -Dmyhostname=k93msid -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Duseithreads -Duselongdouble -DDEBUGGING=both'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion='', gccversion='6.3.0 20170406', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16, longdblkind=3
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/6/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.24.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.24'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options: DEBUGGING HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_COPY_ON_WRITE PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_TRACK_MEMPOOL PERL_USE_DEVEL
USE_64_BIT_ALL USE_64_BIT_INT USE_ITHREADS
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_LOCALE_TIME
USE_LONG_DOUBLE USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
RC1
uncommitted-changes
Built under linux
Compiled at Jul 2 2017 07:46:41
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="27430"
PERL5_CPAN_IS_RUNNING="27430"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/lib/site_perl/5.24.2/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/lib/site_perl/5.24.2
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/lib/5.24.2/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.24.2-RC1/a1a1/lib/5.24.2
.