Back
From: metabase:user:aadcc7a4-35c6-11e1-84c8-58df5e9ffb60
Subject: NA Sub-Spec-Runner-0.23 v5.8.8 GNU/Linux
Date: 2012-01-21T02:58:16Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Steven Haryanto,
This is a computer-generated report for Sub-Spec-Runner-0.23
on perl 5.8.8, created by CPAN-Reporter-1.2003.
Thank you for uploading your work to CPAN. While attempting to build or test
this distribution, the distribution signaled that support is not available
either for this operating system or this version of Perl. Nevertheless, any
diagnostic output produced is provided below for reference. If this is not
what you expect, you may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/perl Build.PL ':
Checking prerequisites...
requires:
! Algorithm::Dependency is not installed
! Array::Functions::Undoable is not installed
! Data::Sah is not installed
! File::chdir is not installed
! Log::Any is not installed
! Moo is not installed
! Sub::Spec is not installed
! Sub::Spec::DepChecker is not installed
! YAML::Syck is not installed
! perl (5.8.8) is installed, but we need version >= 5.010000
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'Sub-Spec-Runner' version '0.23'
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
-------------------------- -------- --------
! Algorithm::Dependency 0 n/a
! Array::Functions::Undoable 0 n/a
Capture::Tiny 0 0.15
! Data::Sah 0 n/a
! File::chdir 0 n/a
JSON 0 2.53
! Log::Any 0 n/a
! Moo 0 n/a
! perl 5.010000 5.008008
! Sub::Spec 0.08 n/a
! Sub::Spec::DepChecker 0 n/a
Test::More 0.96 0.98
! YAML::Syck 0 n/a
build_requires:
Module Need Have
-------------------------- -------- --------
Module::Build 0.3601 0.3800
configure_requires:
Module Need Have
-------------------------- -------- --------
Module::Build 0.3601 0.3800
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_AU
PATH = /usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/home/optus-soe/bin:/root/bin:/home/optus-soe/bin
PERL5LIB =
PERL5OPT = -I/tmp/CPAN-Reporter-lib-z3R6 -MDevel::Autoflush
PERL5_CPANPLUS_IS_RUNNING = 15986
PERL5_CPAN_IS_RUNNING = 15986
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 7084,15986
PERL_AUTOINSTALL = --defaultdeps
PERL_CR_SMOKER_CURRENT = Sub-Spec-Runner-0.23
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /usr/bin/perl
$UID/$EUID = 0 / 0
$GID = 0 10 6 4 3 2 1 0
$EGID = 0 10 6 4 3 2 1 0
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.9800
CPAN::Meta 2.112150
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.52
ExtUtils::MakeMaker 6.62
ExtUtils::Manifest 1.58
ExtUtils::ParseXS n/a
File::Spec 3.33
JSON 2.53
JSON::PP 2.27104
Module::Build 0.3800
Module::Signature 0.68
Parse::CPAN::Meta 1.4401
Test::Harness 3.23
Test::More 0.98
YAML 0.78
YAML::Syck n/a
version 0.88
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.18-194.11.4.el5, archname=x86_64-linux-thread-multi
uname='linux build05.syd.optusnet.com.au 2.6.18-194.11.4.el5 #1 smp tue sep 21 05:04:09 edt 2010 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Doptimize=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -Dversion=5.8.8 -Dmyhostname=localhost -Dperladmin=root@localhost -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Dlibpth=/usr/local/lib64 /lib64 /usr/lib64 -Dprivlib=/usr/lib/perl5/5.8.8 -Dsitelib=/usr/lib/perl5/site_perl/5.8.8 -Dvendorlib=/usr/lib/perl5/vendor_perl/5.8.8 -Darchlib=/usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi -Dsitearch=/usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi -Dvendorarch=/usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi -Darchname=x86_64-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_sethostent_r_proto -Ud_endprotoent_r_proto -Ud_setprotoent_r_proto -Ud_endservent_r_proto -Ud_setservent_r_proto -Dinc_version_list=5.8.7 5.8.6 5.8.5 -Dscriptdir=/usr/bin'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
optimize='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -I/usr/include/gdbm'
ccversion='', gccversion='4.1.2 20080704 (Red Hat 4.1.2-48)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc', ldflags =''
libpth=/usr/local/lib64 /lib64 /usr/lib64
libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.5'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/CORE'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_PERLIO
USE_REENTRANT_API
Built under linux
Compiled at Feb 16 2011 13:38:05
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="15986"
PERL5_CPAN_IS_RUNNING="15986"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="7084,15986"
PERL_AUTOINSTALL="--defaultdeps"
PERL_CR_SMOKER_CURRENT="Sub-Spec-Runner-0.23"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi
/usr/lib64/perl5/site_perl/5.8.7/x86_64-linux-thread-multi
/usr/lib64/perl5/site_perl/5.8.6/x86_64-linux-thread-multi
/usr/lib64/perl5/site_perl/5.8.5/x86_64-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8
/usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6
/usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi
/usr/lib64/perl5/vendor_perl/5.8.7/x86_64-linux-thread-multi
/usr/lib64/perl5/vendor_perl/5.8.6/x86_64-linux-thread-multi
/usr/lib64/perl5/vendor_perl/5.8.5/x86_64-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8
/usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6
/usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl
/usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi
/usr/lib/perl5/5.8.8
.