Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Data-Beacon-0.2.7 v5.8.8 GNU/Linux
Date: 2012-04-22T10:56:02Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear VOJ,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9124. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 /home/cpan/pit/thr-ld/perl-5.8.8/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Data::Beacon;'
# at t/beacon.t line 8.
# Tried to use 'Data::Beacon'.
# Error: Can't locate Time/Piece.pm in @INC (@INC contains: /home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/lib /home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/arch /home/cpan/pit/thr-ld/perl-5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.8.8/lib/5.8.8 /home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl/5.8.8 /home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl) at /home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/lib/Data/Beacon.pm line 6.
# BEGIN failed--compilation aborted at /home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/lib/Data/Beacon.pm line 6.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
Can't locate object method "new" via package "Data::Beacon" at t/beacon.t line 11.
# Looks like you failed 1 test of 1.
# Looks like your test exited with 255 just after 1.
t/beacon.t ......
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
Can't locate DBD/SQLite.pm in @INC (@INC contains: /home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/lib /home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/arch /home/cpan/pit/thr-ld/perl-5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.8.8/lib/5.8.8 /home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl/5.8.8 /home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl) at t/collection.t line 12.
BEGIN failed--compilation aborted at t/collection.t line 12.
# Looks like your test exited with 2 before it could output anything.
t/collection.t ..
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
# Failed test 'use Data::Beacon;'
# at t/errors.t line 7.
# Tried to use 'Data::Beacon'.
# Error: Can't locate Time/Piece.pm in @INC (@INC contains: /home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/lib /home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/arch /home/cpan/pit/thr-ld/perl-5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.8.8/lib/5.8.8 /home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl/5.8.8 /home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl) at /home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/lib/Data/Beacon.pm line 6.
# BEGIN failed--compilation aborted at /home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/lib/Data/Beacon.pm line 6.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
Undefined subroutine &main::beacon called at t/errors.t line 9.
# Looks like you failed 1 test of 1.
# Looks like your test exited with 255 just after 1.
t/errors.t ......
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
t/pod.t ......... skipped: Test::Pod 1.00 required for testing POD
Test Summary Report
-------------------
t/beacon.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
t/collection.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/errors.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Files=4, Tests=2, 0 wallclock secs ( 0.01 usr 0.02 sys + 0.06 cusr 0.00 csys = 0.09 CPU)
Result: FAIL
Failed 3/4 test programs. 2/2 subtests failed.
make: *** [test_dynamic] Error 255
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Time::Piece
DBD::SQLite
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'VOJ (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Time::Piece' => '0', # or a minimum working version
'DBD::SQLite' => '0', # or a minimum working version
}
);
Thanks! :-)
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9124
CPANPLUS::Dist::Build 0.62
Cwd 3.33
ExtUtils::CBuilder 0.280205
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.62
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.15
File::Spec 3.33
Module::Build 0.40
Test::Harness 3.23
Test::More 0.98
version 0.97
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.76.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US
LC_COLLATE = C
PATH = /home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/script:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib64/java/bin:/usr/lib64/qt/bin:/usr/share/texmf/bin:.
PERL5LIB = :/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 19355
PERL5_CPANPLUS_IS_VERSION = 0.9124
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr-ld/conf/perl-5.8.8
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr-ld/perl-5.8.8/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.33.4, archname=x86_64-linux-thread-multi-ld
uname='linux slack64 2.6.33.4 #3 smp wed may 12 23:13:09 cdt 2010 x86_64 intel(r) xeon(r) cpu e5520 @ 2.27ghz genuineintel gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/thr-ld/perl-5.8.8 -Dusethreads -Duselongdouble'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.4.4', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib/../lib64 /usr/lib/../lib64 /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.1'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_LONG_DOUBLE
USE_PERLIO USE_REENTRANT_API
Built under linux
Compiled at Jan 6 2012 01:21:58
%ENV:
PERL5LIB=":/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="19355"
PERL5_CPANPLUS_IS_VERSION="0.9124"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr-ld/conf/perl-5.8.8"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Data-Beacon-0.2.7/blib/arch
/home/cpan/pit/thr-ld/perl-5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld
/home/cpan/pit/thr-ld/perl-5.8.8/lib/5.8.8
/home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld
/home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl/5.8.8
/home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl
.