Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Apache2-AuthAny-0.201 v5.8.2 GNU/Linux
Date: 2017-02-25T16:37:49Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Kim Goldov,
This is a computer-generated report for Apache2-AuthAny-0.201
on perl 5.8.2, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Apache2::AuthAny;'
# at t/00-load.t line 6.
# Tried to use 'Apache2::AuthAny'.
# Error: Can't locate Apache2/Module.pm in @INC (@INC contains: /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/arch /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl) at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny.pm line 5.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny.pm line 5.
# Compilation failed in require at t/00-load.t line 6.
# BEGIN failed--compilation aborted at t/00-load.t line 6.
# Failed test 'use Apache2::AuthAny::AuthenHandler;'
# at t/00-load.t line 7.
# Tried to use 'Apache2::AuthAny::AuthenHandler'.
# Error: Can't locate Apache2/Const.pm in @INC (@INC contains: /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/arch /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl) at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/AuthenHandler.pm line 7.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/AuthenHandler.pm line 7.
# Compilation failed in require at t/00-load.t line 7.
# BEGIN failed--compilation aborted at t/00-load.t line 7.
# Failed test 'use Apache2::AuthAny::AuthUtil;'
# at t/00-load.t line 8.
# Tried to use 'Apache2::AuthAny::AuthUtil'.
# Error: Can't locate Apache2/Const.pm in @INC (@INC contains: /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/arch /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl) at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/AuthUtil.pm line 6.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/AuthUtil.pm line 6.
# Compilation failed in require at t/00-load.t line 8.
# BEGIN failed--compilation aborted at t/00-load.t line 8.
# Failed test 'use Apache2::AuthAny::AuthzHandler;'
# at t/00-load.t line 9.
# Tried to use 'Apache2::AuthAny::AuthzHandler'.
# Error: Can't locate Apache2/Const.pm in @INC (@INC contains: /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/arch /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl) at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/AuthzHandler.pm line 4.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/AuthzHandler.pm line 4.
# Compilation failed in require at t/00-load.t line 9.
# BEGIN failed--compilation aborted at t/00-load.t line 9.
# Failed test 'use Apache2::AuthAny::Cookie;'
# at t/00-load.t line 10.
# Tried to use 'Apache2::AuthAny::Cookie'.
# Error: Can't locate Apache2/Cookie.pm in @INC (@INC contains: /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/arch /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl) at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/Cookie.pm line 6.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/Cookie.pm line 6.
# Compilation failed in require at t/00-load.t line 10.
# BEGIN failed--compilation aborted at t/00-load.t line 10.
# Failed test 'use Apache2::AuthAny::FixupHandler;'
# at t/00-load.t line 12.
# Tried to use 'Apache2::AuthAny::FixupHandler'.
# Error: Can't locate Apache2/Const.pm in @INC (@INC contains: /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/arch /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl) at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/FixupHandler.pm line 4.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/FixupHandler.pm line 4.
# Compilation failed in require at t/00-load.t line 12.
# BEGIN failed--compilation aborted at t/00-load.t line 12.
# Failed test 'use Apache2::AuthAny::MapToStorageHandler;'
# at t/00-load.t line 13.
# Tried to use 'Apache2::AuthAny::MapToStorageHandler'.
# Error: Can't locate Apache2/Const.pm in @INC (@INC contains: /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/arch /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl) at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/MapToStorageHandler.pm line 5.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/MapToStorageHandler.pm line 5.
# Compilation failed in require at t/00-load.t line 13.
# BEGIN failed--compilation aborted at t/00-load.t line 13.
# Failed test 'use Apache2::AuthAny::RequestConfig;'
# at t/00-load.t line 14.
# Tried to use 'Apache2::AuthAny::RequestConfig'.
# Error: Can't locate Apache2/Module.pm in @INC (@INC contains: /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/arch /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl) at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/RequestConfig.pm line 4.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/RequestConfig.pm line 4.
# Compilation failed in require at t/00-load.t line 14.
# BEGIN failed--compilation aborted at t/00-load.t line 14.
# Testing Apache2::AuthAny , Perl 5.008002, /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/bin/perl
# Looks like you failed 8 tests of 9.
t/00-load.t .......
Dubious, test returned 8 (wstat 2048, 0x800)
Failed 8/9 subtests
Env variable AUTH_ANY_DB_USER required at /tmp/loop_over_bdir-23397-8DIdqj/Apache2-AuthAny-0.201-0/blib/lib/Apache2/AuthAny/DB.pm line 17.
# Looks like your test exited with 255 just after 1.
t/DB.t ............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 7/8 subtests
# Failed test 'Pod coverage on Apache2::AuthAny'
# at /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/Test/Pod/Coverage.pm line 133.
# Apache2::AuthAny: requiring 'Apache2::AuthAny' failed
# Failed test 'Pod coverage on Apache2::AuthAny::RequestConfig'
# at /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/Test/Pod/Coverage.pm line 133.
# Apache2::AuthAny::RequestConfig: couldn't find pod
# Failed test 'Pod coverage on Apache2::AuthAny::AuthzHandler'
# at /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/Test/Pod/Coverage.pm line 133.
# Apache2::AuthAny::AuthzHandler: couldn't find pod
# Failed test 'Pod coverage on Apache2::AuthAny::AuthUtil'
# at /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/Test/Pod/Coverage.pm line 133.
# Apache2::AuthAny::AuthUtil: couldn't find pod
# Failed test 'Pod coverage on Apache2::AuthAny::Cookie'
# at /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/Test/Pod/Coverage.pm line 133.
# Apache2::AuthAny::Cookie: couldn't find pod
# Failed test 'Pod coverage on Apache2::AuthAny::AuthenHandler'
# at /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/Test/Pod/Coverage.pm line 133.
# Apache2::AuthAny::AuthenHandler: couldn't find pod
# Failed test 'Pod coverage on Apache2::AuthAny::MapToStorageHandler'
# at /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/Test/Pod/Coverage.pm line 133.
# Apache2::AuthAny::MapToStorageHandler: couldn't find pod
# Failed test 'Pod coverage on Apache2::AuthAny::FixupHandler'
# at /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/Test/Pod/Coverage.pm line 133.
# Apache2::AuthAny::FixupHandler: couldn't find pod
# Failed test 'Pod coverage on Apache2::AuthAny::DB'
# at /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/Test/Pod/Coverage.pm line 133.
# Apache2::AuthAny::DB: couldn't find pod
# Looks like you failed 9 tests of 9.
t/pod-coverage.t ..
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 9/9 subtests
t/pod.t ........... ok
Test Summary Report
-------------------
t/00-load.t (Wstat: 2048 Tests: 9 Failed: 8)
Failed tests: 1-5, 7-9
Non-zero exit status: 8
t/DB.t (Wstat: 65280 Tests: 1 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 8 tests but ran 1.
t/pod-coverage.t (Wstat: 2304 Tests: 9 Failed: 9)
Failed tests: 1-9
Non-zero exit status: 9
Files=4, Tests=30, 1 wallclock secs ( 0.01 usr 0.05 sys + 0.21 cusr 0.04 csys = 0.31 CPU)
Result: FAIL
Failed 3/4 test programs. 17/30 subtests failed.
Makefile:853: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- --------
Test::More 0 1.302076
build_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 0 7.25_01
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 23399
PERL5_CPAN_IS_RUNNING = 23399
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.17
CPAN::Meta 2.150010
Cwd 3.62
ExtUtils::CBuilder 0.280224
ExtUtils::Command 7.25_01
ExtUtils::Install 1.54
ExtUtils::MakeMaker 7.25_01
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.30
File::Spec 3.62
JSON 2.90
JSON::PP 2.91_04
Module::Build 0.4220
Module::Signature 0.81
Parse::CPAN::Meta 2.150010
Test::Harness 3.36
Test::More 1.302076
YAML 1.22
YAML::Syck 1.29
version 0.9917
--
Summary of my perl5 (revision 5.0 version 8 subversion 2) configuration:
Platform:
osname=linux, osvers=4.8.0-2-amd64, archname=x86_64-linux-thread-multi-ld
uname='linux k93msid 4.8.0-2-amd64 #1 smp debian 4.8.11-1 (2016-12-02) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60 -Dmyhostname=k93msid -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Duseithreads -Duselongdouble'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -I/usr/local/include'
ccversion='', gccversion='6.2.1 20161124', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.24.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.24'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY USE_ITHREADS USE_64_BIT_INT USE_64_BIT_ALL USE_LONG_DOUBLE USE_LARGE_FILES PERL_IMPLICIT_CONTEXT
Built under linux
Compiled at Dec 18 2016 18:47:39
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="23399"
PERL5_CPAN_IS_RUNNING="23399"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/5.8.2
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl/5.8.2
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.2/db60/lib/site_perl
.