Alien-OpenSSL v0.15 Perl 5 v5.8.9 amd64-freebsd
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Alien-OpenSSL v0.15
- Platform
- Perl 5 v5.8.9 amd64-freebsd
- Date
- 2022-12-17 13:50:19
- ID
- be93ec74-7e11-11ed-aba6-9a79f339625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Graham Ollis,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
cp lib/Alien/OpenSSL.pm blib/lib/Alien/OpenSSL.pm
"/usr/home/cpan/pit/bare/perl-5.8.9/bin/perl" -MAlien::Build::MM=cmd -e prefix site /usr/home/cpan/pit/jail/DT3_GwD3d9/lib/perl5/amd64-freebsd /usr/home/cpan/pit/jail/DT3_GwD3d9/lib/perl5/amd64-freebsd /usr/home/cpan/pit/jail/DT3_GwD3d9/lib/perl5/amd64-freebsd
Alien::Build::Plugin::PkgConfig::Negotiate> Using PkgConfig plugin: PkgConfig::CommandLine
main> prefix /usr/home/cpan/pit/jail/DT3_GwD3d9/lib/perl5/amd64-freebsd/auto/share/dist/Alien-OpenSSL
"/usr/home/cpan/pit/bare/perl-5.8.9/bin/perl" -MAlien::Build::MM=cmd -e version 0.15
Alien::Build::Plugin::PkgConfig::Negotiate> Using PkgConfig plugin: PkgConfig::CommandLine
"/usr/home/cpan/pit/bare/perl-5.8.9/bin/perl" -MAlien::Build::MM=cmd -e download
Alien::Build::Plugin::PkgConfig::Negotiate> Using PkgConfig plugin: PkgConfig::CommandLine
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-filename :%{filename_effective}\n
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-content_type :%{content_type}\n
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-url :%{url_effective}\n
Alien::Build::Plugin::Fetch::CurlCommand> + /usr/local/bin/curl -L -f -O -J -w @writeout https://www.openssl.org/source/
Alien::Build::Plugin::Fetch::CurlCommand> % Total % Received % Xferd Average Speed Time Time Time Current
Alien::Build::Plugin::Fetch::CurlCommand> Dload Upload Total Spent Left Speed
Alien::Build::Plugin::Fetch::CurlCommand>
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Remote filename has no length!
Alien::Build::Plugin::Fetch::CurlCommand>
100 8801 100 8801 0 0 18489 0 --:--:-- --:--:-- --:--:-- 24583
Alien::Build::Plugin::Fetch::CurlCommand> curl: (23) Failure writing output to destination
Alien::Build::Plugin::Fetch::CurlCommand> + /usr/local/bin/curl -L -f -o index.html -w @writeout https://www.openssl.org/source/
Alien::Build::Plugin::Core::Download> decoding html
Alien::Build::Plugin::Core::Download> candidate *https://www.openssl.org/source/openssl-3.0.7.tar.gz
Alien::Build::Plugin::Core::Download> candidate https://www.openssl.org/source/openssl-1.1.1s.tar.gz
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-filename :%{filename_effective}\n
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-content_type :%{content_type}\n
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-url :%{url_effective}\n
Alien::Build::Plugin::Fetch::CurlCommand> + /usr/local/bin/curl -L -f -O -J -w @writeout https://www.openssl.org/source/openssl-3.0.7.tar.gz
Alien::Build::Plugin::Core::Download> setting version based on archive to 3.0.7
Alien::Build::Plugin::Core::Download> downloaded openssl-3.0.7.tar.gz
"/usr/home/cpan/pit/bare/perl-5.8.9/bin/perl" -MAlien::Build::MM=cmd -e build
Alien::Build::Plugin::PkgConfig::Negotiate> Using PkgConfig plugin: PkgConfig::CommandLine
Alien::Build::CommandSequence> + ./config --prefix=/usr/home/cpan/pit/jail/DT3_GwD3d9/lib/perl5/amd64-freebsd/auto/share/dist/Alien-OpenSSL --libdir=/usr/home/cpan/pit/jail/DT3_GwD3d9/lib/perl5/amd64-freebsd/auto/share/dist/Alien-OpenSSL/lib shared
Configuring OpenSSL version 3.0.7 for target BSD-x86_64
Using os-specific seed configuration
Created configdata.pm
Running configdata.pm
Unrecognized escape \R passed through at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/mPqdOEpHhk/Alien-OpenSSL-0.15/_alien/build_1wfb/openssl-3.0.7/util/perl/OpenSSL/fallback.pm line 90.
Unsuccessful stat on filename containing newline at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/mPqdOEpHhk/Alien-OpenSSL-0.15/_alien/build_1wfb/openssl-3.0.7/util/perl/OpenSSL/fallback.pm line 107, <$fh> line 1.
All lines in /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/mPqdOEpHhk/Alien-OpenSSL-0.15/_alien/build_1wfb/openssl-3.0.7/external/perl/MODULES.txt must be a directory, not a file: Text-Template-1.56/lib
at configdata.pm line 30409
BEGIN failed--compilation aborted at configdata.pm line 30409.
external command failed at /usr/home/cpan/pit/jail/DT3_GwD3d9/lib/perl5/Alien/Build/CommandSequence.pm line 88.
*** Error code 2
Stop.
make: stopped in /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/mPqdOEpHhk/Alien-OpenSSL-0.15
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Alien::Base 2.74 0.038
Alien::Build 2.74 0.25
Alien::Build::MM 2.74 0.32
Alien::Build::Plugin::Gather::IsolateDynamic 2.74 0.48
Archive::Tar 2.40 0
ExtUtils::MakeMaker 7.64 6.52
IO::Zlib 1.11 0
Mojo::DOM58 3.001 1.00
Sort::Versions 1.62 0
Test2::V0 0.000145 0.000121
Test::Alien 2.74 0
Test::Alien::Diag 2.74 0
Test::More 1.302191 0.96
Text::Template 1.61 0
URI 5.17 0
URI::Escape 5.17 0
base 2.13 0
strict 1.03 0
warnings 1.05_01 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.64
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.64
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.44
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.35
Pod::Simple 3.43
Test2 1.302191
Test::Harness 3.44
Test::More 1.302191
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = /usr/home/cpan/pit/jail/DT3_GwD3d9/lib/perl5
PERL5_CPANPLUS_IS_RUNNING = 1484
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.8.9
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /usr/home/cpan/pit/jail/DT3_GwD3d9
PERL_MB_OPT = --install_base "/usr/home/cpan/pit/jail/DT3_GwD3d9"
PERL_MM_OPT = INSTALL_BASE=/usr/home/cpan/pit/jail/DT3_GwD3d9
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.8.9/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=freebsd, osvers=12.3-release, archname=amd64-freebsd
uname='freebsd fforc 12.3-release freebsd 12.3-release r371126 generic amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.8.9'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O2',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='FreeBSD Clang 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_FAST_STDIO USE_LARGE_FILES USE_PERLIO
Locally applied patches:
Devel::PatchPerl 2.08
Built under freebsd
Compiled at Dec 8 2021 01:30:38
%ENV:
PERL5LIB="/usr/home/cpan/pit/jail/DT3_GwD3d9/lib/perl5"
PERL5_CPANPLUS_IS_RUNNING="1484"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.8.9"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/usr/home/cpan/pit/jail/DT3_GwD3d9"
PERL_MB_OPT="--install_base "/usr/home/cpan/pit/jail/DT3_GwD3d9""
PERL_MM_OPT="INSTALL_BASE=/usr/home/cpan/pit/jail/DT3_GwD3d9"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/usr/home/cpan/pit/jail/DT3_GwD3d9/lib/perl5/5.8.9/amd64-freebsd
/usr/home/cpan/pit/jail/DT3_GwD3d9/lib/perl5/5.8.9
/usr/home/cpan/pit/jail/DT3_GwD3d9/lib/perl5/amd64-freebsd
/usr/home/cpan/pit/jail/DT3_GwD3d9/lib/perl5
/usr/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9
/usr/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9
.