Back
From: metabase:user:7a813316-32bd-11e2-bf32-c14f82f9d875
Subject: FAIL PerlIO-via-Skip-0.06 v5.10.0 Mac OS X
Date: 2012-12-10T09:05:17Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Ioannis Tambouras,
This is a computer-generated report for PerlIO-via-Skip-0.06
on perl 5.10.0, created by CPAN-Reporter-1.2006.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
none provided
------------------------------
PROGRAM OUTPUT
------------------------------
Output from './Build test':
Use of uninitialized value $Test::Harness::Switches in length at /Library/Perl/Updates/5.10.0/Module/Build/Base.pm line 2767.
t/00_load.t ............ ok
t/01b_pod.t ............ ok
t/01c_coverage.t ....... ok
t/01s_spelling.t ....... ok
t/02_hasversion.t ...... ok
# Failed test '../Acme-LAUTER-DEUTSCHER-1.02-uYsw1U.yml contains valid YAML'
# at t/03_meta.t line 9.
# Failed test '../Acme-LAUTER-DEUTSCHER-1.02-uYsw1U.yml meets the designated specification'
# at t/03_meta.t line 9.
# ERR: Failed to load YAML document from '../Acme-LAUTER-DEUTSCHER-1.02-uYsw1U.yml' at /Library/Perl/Updates/5.10.0/Parse/CPAN/Meta.pm line 111.
# Looks like you failed 2 tests of 2.
t/03_meta.t ............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
t/05_minimumversion.t .. ok
t/07_strict.t .......... ok
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 65, <_GEN_0> line 2.
# Looks like your test exited with 2 before it could output anything.
t/binmode.t ............
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/config.t ............. ok
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 65, <_GEN_0> line 2.
# Looks like your test exited with 2 before it could output anything.
t/dot.t ................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/main.t ............... ok
t/mode.t ............... ok
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 65, <_GEN_1> line 2.
# Looks like your test exited with 2 just after 1.
t/r01_general.t ........
Dubious, test returned 2 (wstat 512, 0x200)
All 1 subtests passed
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 65, <_GEN_3> chunk 2.
# Looks like your test exited with 2 just after 3.
t/r02_eol.t ............
Dubious, test returned 2 (wstat 512, 0x200)
All 3 subtests passed
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 70.
# Looks like your test exited with 2 before it could output anything.
t/r03_after.t ..........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 65, <_GEN_2> line 2.
# Looks like your test exited with 2 just after 2.
t/r04_maxlines.t .......
Dubious, test returned 2 (wstat 512, 0x200)
All 2 subtests passed
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 65, <_GEN_0> line 2.
# Looks like your test exited with 2 before it could output anything.
t/r05_patterns.t .......
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/r06_blanklines.t ..... ok
t/r07_comments.t ....... ok
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 65, <_GEN_0> chunk 2.
# Looks like your test exited with 2 before it could output anything.
t/rr01_general.t .......
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 65, <_GEN_0> chunk 2.
# Looks like your test exited with 2 before it could output anything.
t/rw01_general.t .......
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 96, <DATA> line 3.
# Looks like your test exited with 2 before it could output anything.
t/w01_general.t ........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 96, <DATA> chunk 2.
# Looks like your test exited with 2 before it could output anything.
t/w02a_eol.t ...........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 96, <DATA> line 1.
# Looks like your test exited with 2 before it could output anything.
t/w02b_eol.t ...........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 96, <DATA> line 3.
# Looks like your test exited with 2 before it could output anything.
t/w03_after.t ..........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 96, <DATA> line 13.
# Looks like your test exited with 2 just after 2.
t/w04_maxlines.t .......
Dubious, test returned 2 (wstat 512, 0x200)
All 2 subtests passed
Modification of a read-only value attempted at /Users/ericgallager/.cpan/build/PerlIO-via-Skip-0.06-OuUxPu/blib/lib/PerlIO/via/Skip.pm line 96, <DATA> line 3.
# Looks like your test exited with 2 before it could output anything.
t/w05_patterns.t .......
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/w06_blanklines.t ..... ok
t/w07_comments.t ....... ok
Test Summary Report
-------------------
t/03_meta.t (Wstat: 512 Tests: 2 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 2
t/binmode.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/dot.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/r01_general.t (Wstat: 512 Tests: 1 Failed: 0)
Non-zero exit status: 2
t/r02_eol.t (Wstat: 512 Tests: 3 Failed: 0)
Non-zero exit status: 2
t/r03_after.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/r04_maxlines.t (Wstat: 512 Tests: 2 Failed: 0)
Non-zero exit status: 2
t/r05_patterns.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/rr01_general.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/rw01_general.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/w01_general.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/w02a_eol.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/w02b_eol.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/w03_after.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/w04_maxlines.t (Wstat: 512 Tests: 2 Failed: 0)
Non-zero exit status: 2
t/w05_patterns.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=30, Tests=69, 24 wallclock secs ( 0.13 usr 0.14 sys + 5.26 cusr 0.46 csys = 5.99 CPU)
Result: FAIL
Failed 16/30 test programs. 2/69 subtests failed.
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------ ----- --------
perl 5.006 5.010000
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
LANG = en_US.UTF-8
PATH = /Users/ericgallager/perl5/bin:/Library/Frameworks/Python.framework/Versions/Current/bin:/Library/Frameworks/Python.framework/Versions/Current/bin:/Users/ericgallager/.rvm/gems/ruby-1.9.3-p327/bin:/Users/ericgallager/.rvm/gems/ruby-1.9.3-p327@global/bin:/Users/ericgallager/.rvm/rubies/ruby-1.9.3-p327/bin:/Users/ericgallager/.rvm/bin:/Users/ericgallager/bin:/usr/local/sbin:/usr/local/bin:/Developer/usr/bin:/Library/Frameworks/Python.framework/Versions/2.7/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/opt/X11/bin:/usr/texbin:/usr/X11/bin:/opt/local/bin:/Developer/usr/bin:/sw/bin:/sw2/bin:/opt/local/share/java/android-sdk-macosx/tools:/opt/local/share/java/android-sdk-macosx/platform-tools:/opt/local/sbin:/opt/local/GNUstep/System/Tools:/sw/sbin:/sw2/bootstrap/bin:/sw2/bootstrap/sbin:/usr/local/sbin:/Developer/Tools:/usr/local/tigcc/bin:/usr/local/texlive/2010basic/bin/universal-darwin:/usr/local/php5/bin:/usr/local/mysql-5.5.9-osx10.6-x86_64/bin:/usr/local/mysql/bin:/Developer/usr/sbin:/Developer/usr/local/bin:/usr/local/heroku/bin:/usr/local/git/bin:/usr/local/foreman/bin:/usr/local/flexnetserver:/usr/local/clamXav/bin:/opt/nova/bin:/opt/local/lib/erlang/bin:/Users/ericgallager/Downloads/WebKit-r101776/Tools/CygwinDownloader/bin:/Users/ericgallager/Downloads/nacl_sdk/pepper_15/toolchain/mac_x86_newlib/bin:/usr/local/ActivePerl-5.14/bin:/usr/local/PDK/bin:/opt/local/GNUstep/bin:/:/Users/ericgallager/bin/FDK/Tools/osx
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 736
PERL5_CPAN_IS_RUNNING = 736
SHELL = /bin/bash
TERM = xterm-color
VERSIONER_PERL_PREFER_32_BIT = no
VERSIONER_PERL_VERSION = 5.10.0
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /usr/bin/perl
$UID/$EUID = 0 / 0
$GID = 0 0 403 402 401 204 100 98 80 61 29 20 12 9 8 5 4 3 2 1
$EGID = 0 0 403 402 401 204 100 98 80 61 29 20 12 9 8 5 4 3 2 1
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.9800
CPAN::Meta 2.112150
Cwd 3.33
ExtUtils::CBuilder 0.280205
ExtUtils::Command 1.17
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.62
ExtUtils::Manifest 1.61
ExtUtils::ParseXS 3.18
File::Spec 3.33
JSON 2.53
JSON::PP 2.27104
Module::Build 0.4003
Module::Signature 0.70
Parse::CPAN::Meta 1.4401
Test::Harness 3.25
Test::More 0.98
YAML 0.84
YAML::Syck 1.21
version 0.9901
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=darwin, osvers=10.0, archname=darwin-thread-multi-2level
uname='darwin neige.apple.com 10.0 darwin kernel version 10.0.0d8: tue may 5 19:29:59 pdt 2009; root:xnu-1437.2~2release_i386 i386 '
config_args='-ds -e -Dprefix=/usr -Dccflags=-g -pipe -Dldflags= -Dman3ext=3pm -Duseithreads -Duseshrplib -Dinc_version_list=none -Dcc=gcc-4.2'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc-4.2', ccflags ='-arch x86_64 -arch i386 -arch ppc -g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include',
optimize='-Os',
cppflags='-g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include'
ccversion='', gccversion='4.2.1 (Apple Inc. build 5646)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc-4.2 -mmacosx-version-min=10.6', ldflags ='-arch x86_64 -arch i386 -arch ppc -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-ldbm -ldl -lm -lutil -lc
perllibs=-ldl -lm -lutil -lc
libc=/usr/lib/libc.dylib, so=dylib, useshrplib=true, libperl=libperl.dylib
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-arch x86_64 -arch i386 -arch ppc -bundle -undefined dynamic_lookup -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_REENTRANT_API
Locally applied patches:
/Library/Perl/Updates/<version> comes before system perl directories
installprivlib and installarchlib points to the Updates directory
Built under darwin
Compiled at Jun 24 2009 00:35:27
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="736"
PERL5_CPAN_IS_RUNNING="736"
@INC:
/Library/Perl/Updates/5.10.0/darwin-thread-multi-2level
/Library/Perl/Updates/5.10.0
/System/Library/Perl/5.10.0/darwin-thread-multi-2level
/System/Library/Perl/5.10.0
/Library/Perl/5.10.0/darwin-thread-multi-2level
/Library/Perl/5.10.0
/Network/Library/Perl/5.10.0/darwin-thread-multi-2level
/Network/Library/Perl/5.10.0
/Network/Library/Perl
/System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level
/System/Library/Perl/Extras/5.10.0
.