Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: PASS App-SmokeBox-PerlVersion-0.08 v5.8.8 GNU/Linux
Date: 2012-02-21T09:23:15Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Chris Williams,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9118. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 /home/cpan/pit/thr-ld/perl-5.8.8/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............ ok
# Using Perl /home/cpan/pit/thr-ld/perl-5.8.8/bin/perl
#
# This is perl, v5.8.8 built for x86_64-linux-thread-multi-ld
#
# Copyright 1987-2006, Larry Wall
#
# Perl may be copied only under the terms of either the Artistic License or the
# GNU General Public License, which may be found in the Perl 5 source kit.
#
# Complete documentation for Perl, including FAQ lists, should be found on
# this system using "man perl" or "perldoc perl". If you have access to the
# Internet, point your browser at http://www.perl.org/, the Perl Home Page.
#
t/01-event.t .............. ok
# Using Perl /home/cpan/pit/thr-ld/perl-5.8.8/bin/perl
#
# This is perl, v5.8.8 built for x86_64-linux-thread-multi-ld
#
# Copyright 1987-2006, Larry Wall
#
# Perl may be copied only under the terms of either the Artistic License or the
# GNU General Public License, which may be found in the Perl 5 source kit.
#
# Complete documentation for Perl, including FAQ lists, should be found on
# this system using "man perl" or "perldoc perl". If you have access to the
# Internet, point your browser at http://www.perl.org/, the Perl Home Page.
#
t/02-postback.t ........... ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
All tests successful.
Files=5, Tests=15, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.33 cusr 0.11 csys = 0.48 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
IPC::Cmd 0.76 0
POE 1.350 1.293
POE::Quickie 0.18 0.11
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9118
CPANPLUS::Dist::Build 0.62
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.62
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.15
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.96
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.68.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US
LC_COLLATE = C
PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib64/java/bin:/usr/lib64/qt/bin:/usr/share/texmf/bin:.
PERL5LIB = :/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/IO-1.25/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/IO-1.25/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/IO-Tty-1.10/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/IO-Tty-1.10/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-Test-Loops-1.350/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-Test-Loops-1.350/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-1.350/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-1.350/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Capture-Tiny-0.16/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Capture-Tiny-0.16/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-Tester-0.108/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-Tester-0.108/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-NoWarnings-1.04/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-NoWarnings-1.04/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-Deep-0.109/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-Deep-0.109/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-Quickie-0.18/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-Quickie-0.18/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/App-SmokeBox-PerlVersion-0.08/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/App-SmokeBox-PerlVersion-0.08/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 12863
PERL5_CPANPLUS_IS_VERSION = 0.9118
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr-ld/conf/perl-5.8.8
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr-ld/perl-5.8.8/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.33.4, archname=x86_64-linux-thread-multi-ld
uname='linux slack64 2.6.33.4 #3 smp wed may 12 23:13:09 cdt 2010 x86_64 intel(r) xeon(r) cpu e5520 @ 2.27ghz genuineintel gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/thr-ld/perl-5.8.8 -Dusethreads -Duselongdouble'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.4.4', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib/../lib64 /usr/lib/../lib64 /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.1'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_LONG_DOUBLE
USE_PERLIO USE_REENTRANT_API
Built under linux
Compiled at Jan 6 2012 01:21:58
%ENV:
PERL5LIB=":/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/IO-1.25/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/IO-1.25/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/IO-Tty-1.10/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/IO-Tty-1.10/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-Test-Loops-1.350/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-Test-Loops-1.350/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-1.350/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-1.350/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Capture-Tiny-0.16/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Capture-Tiny-0.16/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-Tester-0.108/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-Tester-0.108/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-NoWarnings-1.04/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-NoWarnings-1.04/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-Deep-0.109/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-Deep-0.109/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-Quickie-0.18/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-Quickie-0.18/blib/arch:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/App-SmokeBox-PerlVersion-0.08/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/App-SmokeBox-PerlVersion-0.08/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="12863"
PERL5_CPANPLUS_IS_VERSION="0.9118"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr-ld/conf/perl-5.8.8"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/IO-1.25/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/IO-1.25/blib/arch
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/IO-Tty-1.10/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/IO-Tty-1.10/blib/arch
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-Test-Loops-1.350/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-Test-Loops-1.350/blib/arch
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-1.350/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-1.350/blib/arch
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Capture-Tiny-0.16/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Capture-Tiny-0.16/blib/arch
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-Tester-0.108/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-Tester-0.108/blib/arch
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-NoWarnings-1.04/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-NoWarnings-1.04/blib/arch
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-Deep-0.109/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/Test-Deep-0.109/blib/arch
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-Quickie-0.18/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/POE-Quickie-0.18/blib/arch
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/App-SmokeBox-PerlVersion-0.08/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.8.8/.cpanplus/5.8.8/build/App-SmokeBox-PerlVersion-0.08/blib/arch
/home/cpan/pit/thr-ld/perl-5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld
/home/cpan/pit/thr-ld/perl-5.8.8/lib/5.8.8
/home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld
/home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl/5.8.8
/home/cpan/pit/thr-ld/perl-5.8.8/lib/site_perl
.