Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL git-deploy-6.01 v5.16.3 GNU/Linux
Date: 2014-04-20T07:37:52Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear AEvar Arnfjord Bjarmason,
This is a computer-generated report for git-deploy-6.01
on perl 5.16.3, created by CPAN-Reporter-1.2011.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_compile.t .. ok
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy start >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <25>, but we wanted <0>: Illegal seek'
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# Failed test 'We created a tag because there wasn't one already'
# at t/run.t line 25.
# ''
# doesn't match '(?^:debug)'
# Failed test 'We print a notice about the deploy being started'
# at t/run.t line 26.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:Deploy procedure has started)'
# Failed test 'By default we don't send mail on 'start''
# at t/run.t line 27.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:Not sending mail on action)'
# Failed test 'We push any tags we have to origin on startup'
# at t/run.t line 28.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy status >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <0>, but we wanted <1>: '
# at t/lib/Git/Deploy/Test.pm line 23.
# Failed test 'We note the correct status'
# at t/run.t line 35.
# '# NOTE : No debug deployment currently in progress
# '
# doesn't match '(?^:debug rollout started - not synced yet)'
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy sync >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <25>, but we wanted <1>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# Failed test 'XXX: On our first sync we bitch about the tag we just made. We shouldn't do that.'
# at t/run.t line 43.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:It seems like there is nothing to sync)'
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy --force sync >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# Failed test 'XXX: On our first sync we bitch about the tag we just made. We shouldn't do that.'
# at t/run.t line 55.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:--force enabling rolling out same thing you had when you started)'
# Failed test 'We don't have any sync hook yet'
# at t/run.t line 60.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:You must now hand execute the synchronization process and then execute)'
# Failed test 'Should be in output: Step 'sync' finished'
# at t/run.t line 69.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'sync' finished)'
# Failed test 'Should be in output: git push --tags origin'
# at t/run.t line 69.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'Should be in output: Not sending mail on action 'sync''
# at t/run.t line 69.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:Not sending mail on action 'sync')'
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy status >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <0>, but we wanted <2>: '
# at t/lib/Git/Deploy/Test.pm line 23.
# Failed test 'We note the correct status'
# at t/run.t line 80.
# '# NOTE : No debug deployment currently in progress
# '
# doesn't match '(?^:debug rollout tagged - awaiting sync)'
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy finish >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# Failed test 'Should be in output: Looks like you are all done! Have a nice day'
# at t/run.t line 90.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:Looks like you are all done! Have a nice day)'
# Failed test 'Should be in output: git push --tags origin'
# at t/run.t line 90.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'Should be in output: Step 'finish' finished.'
# at t/run.t line 90.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'finish' finished.)'
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy start >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# Failed test 'We finished the start step'
# at t/run.t line 107.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'start' finished)'
# Failed test 'We have stuff in 'log''
# at t/run.t line 120.
# ''
# doesn't match '(?^:This is a commit message)'
# Failed test 'We have stuff in 'diff''
# at t/run.t line 130.
# ''
# doesn't match '(?^:CHANGES)'
# Failed test 'The tag we had before rollout is <>'
# at t/run.t line 141.
# ''
# doesn't match '(?^:^debug-)'
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy sync >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <25>, but we wanted <1>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# Failed test 'Should be in output: It looks like there are unpushed commits'
# at t/run.t line 152.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is ahead of 'origin/master' by 1 commit.
# # FATAL: (use "git push" to publish your local commits)
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:It looks like there are unpushed commits)'
# Failed test 'Should be in output: Most likely this is harmless'
# at t/run.t line 152.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is ahead of 'origin/master' by 1 commit.
# # FATAL: (use "git push" to publish your local commits)
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:Most likely this is harmless)'
# Failed test 'We should get a commit message in the output'
# at t/run.t line 155.
# ''
# doesn't match '(?^:This is a commit message)'
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy status >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <0>, but we wanted <1>: '
# at t/lib/Git/Deploy/Test.pm line 23.
# Failed test 'We note the correct status'
# at t/run.t line 166.
# '# NOTE : No debug deployment currently in progress
# '
# doesn't match '(?^:debug rollout started - not synced yet)'
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy sync >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# Failed test 'We don't have any sync hook yet'
# at t/run.t line 176.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:You must now hand execute the synchronization process and then execute)'
# Failed test 'Should be in output: Step 'sync' finished'
# at t/run.t line 185.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'sync' finished)'
# Failed test 'Should be in output: git push --tags origin'
# at t/run.t line 185.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'Should be in output: Not sending mail on action 'sync''
# at t/run.t line 185.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:Not sending mail on action 'sync')'
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy status >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <0>, but we wanted <2>: '
# at t/lib/Git/Deploy/Test.pm line 23.
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy finish >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# Failed test 'Should be in output: Looks like you are all done! Have a nice day'
# at t/run.t line 205.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:Looks like you are all done! Have a nice day)'
# Failed test 'Should be in output: git push --tags origin'
# at t/run.t line 205.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'Should be in output: Step 'finish' finished.'
# at t/run.t line 205.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'finish' finished.)'
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy revert 2 >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# Failed test 'Should be in output: You've selected the choice <2>'
# at t/run.t line 219.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:You've selected the choice <2>)'
# Failed test 'Should be in output: The following commits are available'
# at t/run.t line 219.
# '# FATAL: working directory not clean. git status reports:
# # FATAL: On branch master
# # FATAL: Your branch is up-to-date with 'origin/master'.
# # FATAL:
# # FATAL: nothing to commit, working directory clean
# Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# '
# doesn't match '(?^:The following commits are available)'
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy sync >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
# Failed test 'The command </home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl -I/tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/git-deploy-lib /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy finish >/tmp/git-deploy-tS5c4/output/last_stdout 2>/tmp/git-deploy-tS5c4/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /tmp/loop_over_bdir-5040-d79Ows/git-deploy-6.01-clL4qt/bin/git-deploy line 45.
fatal: ..: '..' is outside repository
# Looks like you failed 47 tests of 89.
# Failed test 'A rollout etc.'
# at t/lib/Git/Deploy/Test.pm line 98.
# Looks like you failed 1 test of 1.
t/run.t .........
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
Test Summary Report
-------------------
t/run.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=2, Tests=6, 8 wallclock secs ( 0.04 usr 0.00 sys + 1.62 cusr 0.26 csys = 1.92 CPU)
Result: FAIL
Failed 1/2 test programs. 1/6 subtests failed.
make: *** [test_dynamic] Error 1
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
--------------------- ---- --------
Carp 0 1.3301
constant 0 1.27
Cwd 0 3.40
Data::Dumper 0 2.151
Exporter 0 5.70
Fcntl 0 1.11
File::Basename 0 2.84
File::Spec::Functions 0 3.40
FindBin 0 1.51
Getopt::Long 0 2.42
Memoize 0 1.02
Pod::Usage 0 1.63
POSIX 0 1.30
strict 0 1.07
Sys::Hostname 0 1.16
Term::ReadLine 0 1.09
Time::HiRes 0 1.9725
warnings 0 1.13
build_requires:
Module Need Have
--------------------- ---- --------
File::Temp 0 0.2304
Test::More 0 1.001003
configure_requires:
Module Need Have
--------------------- ---- --------
ExtUtils::MakeMaker 6.30 6.96
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 5041
PERL5_CPAN_IS_RUNNING = 5041
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.05
CPAN::Meta 2.140640
Cwd 3.40
ExtUtils::CBuilder 0.280216
ExtUtils::Command 1.17
ExtUtils::Install 1.67
ExtUtils::MakeMaker 6.96
ExtUtils::Manifest 1.61
ExtUtils::ParseXS 3.24
File::Spec 3.40
JSON 2.90
JSON::PP 2.27203
Module::Build 0.4205
Module::Signature 0.73
Parse::CPAN::Meta 1.4414
Test::Harness 3.30
Test::More 1.001003
YAML 0.90
YAML::Syck 1.27
version 0.9908
--
Summary of my perl5 (revision 5 version 16 subversion 3) configuration:
Commit id: fd04d42d38f4751b981eb6e9213ee1ab8ef11ea6
Platform:
osname=linux, osvers=3.13-1-amd64, archname=x86_64-linux-thread-multi-ld
uname='linux k83 3.13-1-amd64 #1 smp debian 3.13.7-1 (2014-03-25) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Duseithreads -Duselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.8.2', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.18'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP PERL_PRESERVE_IVUV PERL_USE_DEVEL
USE_64_BIT_ALL USE_64_BIT_INT USE_ITHREADS
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_LONG_DOUBLE
USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API
Built under linux
Compiled at Apr 2 2014 14:02:38
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="5041"
PERL5_CPAN_IS_RUNNING="5041"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/lib/site_perl/5.16.3/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/lib/site_perl/5.16.3
/home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/lib/5.16.3/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/perl/v5.16.3/a2da/lib/5.16.3
.