Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Config-DB-0.2 v5.8.9 GNU/Linux
Date: 2012-01-10T16:18:06Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear ICC,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9115. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Tue Jan 10 16:17:28 2012] cp lib/Config/DB/Record.pm blib/lib/Config/DB/Record.pm
cp lib/Config/DB.pm blib/lib/Config/DB.pm
cp lib/Config/DB/Table.pm blib/lib/Config/DB/Table.pm
Manifying blib/man3/Config::DB::Record.3
Manifying blib/man3/Config::DB.3
Manifying blib/man3/Config::DB::Table.3
[ERROR] [Tue Jan 10 16:17:28 2012] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/pit/bare/perl-5.8.9/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_new.t ..... ok
DBD::DBM::db do failed: Cannot open /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Config-DB-0.2/notable.lck: No such file or directory (2) at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/lib/DBD/File.pm line 730 at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
[for Statement "DROP TABLE notable"] at t/02_params.t line 5.
# Failed test 'ok call'
# at t/02_params.t line 53.
# got: 'DBD::DBM::db selectall_hashref failed: No such column 'nofield AS dbcfg_key' at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
# [for Statement "SELECT nofield AS dbcfg_key, notable.* FROM notable"] at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Config-DB-0.2/blib/lib/Config/DB.pm line 107.
#
# Config::DB::read: reading 'notable' table at t/02_params.t line 52
# '
# expected: ''
# Looks like you failed 1 test of 6.
t/02_params.t ..
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/6 subtests
DBD::DBM::db do failed: Cannot open /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Config-DB-0.2/cfg.lck: No such file or directory (2) at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/lib/DBD/File.pm line 730 at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
[for Statement "DROP TABLE cfg"] at t/03_get.t line 5.
# Failed test 'ok call'
# at t/03_get.t line 20.
# got: 'DBD::DBM::db selectall_hashref failed: No such column 'ckey AS dbcfg_key' at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
# [for Statement "SELECT ckey AS dbcfg_key, cfg.* FROM cfg"] at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Config-DB-0.2/blib/lib/Config/DB.pm line 107.
#
# Config::DB::read: reading 'cfg' table at t/03_get.t line 19
# '
# expected: ''
# Failed test 'missing table parameter'
# at t/03_get.t line 23.
# 'DBD::DBM::db selectall_hashref failed: No such column 'ckey AS dbcfg_key' at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
# [for Statement "SELECT ckey AS dbcfg_key, cfg.* FROM cfg"] at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Config-DB-0.2/blib/lib/Config/DB.pm line 107.
#
# Config::DB::read: reading 'cfg' table at t/03_get.t line 22
# '
# doesn't match '(?-xism:^Config::DB::get: missing table parameter at t/03_get.t line \d+$)'
DBD::DBM::db selectall_hashref failed: No such column 'ckey AS dbcfg_key' at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/lib/DBI/DBD/SqlEngine.pm line 795
[for Statement "SELECT ckey AS dbcfg_key, cfg.* FROM cfg"] at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Config-DB-0.2/blib/lib/Config/DB.pm line 107.
Config::DB::read: reading 'cfg' table at t/03_get.t line 29
# Looks like you planned 28 tests but ran 4.
# Looks like you failed 2 tests of 4 run.
# Looks like your test exited with 2 just after 4.
t/03_get.t .....
Dubious, test returned 2 (wstat 512, 0x200)
Failed 26/28 subtests
Test Summary Report
-------------------
t/02_params.t (Wstat: 256 Tests: 6 Failed: 1)
Failed test: 6
Non-zero exit status: 1
t/03_get.t (Wstat: 512 Tests: 4 Failed: 2)
Failed tests: 3-4
Non-zero exit status: 2
Parse errors: Bad plan. You planned 28 tests but ran 4.
Files=3, Tests=23, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.15 cusr 0.02 csys = 0.20 CPU)
Result: FAIL
Failed 2/3 test programs. 3/23 subtests failed.
make: *** [test_dynamic] Error 2
[MSG] [Tue Jan 10 16:17:28 2012] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
DBI 1.616 1.616
ExtUtils::MakeMaker 6.62 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9115
CPANPLUS::Dist::Build 0.60
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.62
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.11
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.95
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.66.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US
LC_COLLATE = C
PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib64/java/bin:/usr/lib64/qt/bin:/usr/share/texmf/bin:.
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Config-DB-0.2/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Config-DB-0.2/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 10670
PERL5_CPANPLUS_IS_VERSION = 0.9115
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.8.9
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.8.9/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=linux, osvers=2.6.33.4, archname=x86_64-linux
uname='linux slack64 2.6.33.4 #3 smp wed may 12 23:13:09 cdt 2010 x86_64 intel(r) xeon(r) cpu e5520 @ 2.27ghz genuineintel gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.8.9'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.4.4', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64 /usr/local/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.1'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_FAST_STDIO USE_LARGE_FILES USE_PERLIO
Built under linux
Compiled at Feb 15 2011 14:02:07
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Config-DB-0.2/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Config-DB-0.2/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="10670"
PERL5_CPANPLUS_IS_VERSION="0.9115"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.8.9"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/DBI-1.616/blib/arch
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Config-DB-0.2/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/Config-DB-0.2/blib/arch
/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9/x86_64-linux
/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9
/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux
/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9
.