Back
From: metabase:user:a0e144f2-373b-11e6-8edd-c6848980b093
Subject: UNKNOWN Sys-Signal-0.02 v5.26.0 GNU/Linux
Date: 2017-05-01T06:01:47Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Doug MacEachern,
This is a computer-generated report for Sys-Signal-0.02
on perl 5.26.0, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, attempting to
test your distribution gave an inconclusive result.
This could be because your distribution had an error during the make/build
stage, did not define tests, tests could not be found, because your tests were
interrupted before they finished, or because the results of the tests could not
be parsed. You may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make -j3 -j3':
Running Mkbootstrap for Signal ()
"/home/cpan3/install/bin/perl" "/home/cpan3/install/lib/perl5/site_perl/5.26.0/ExtUtils/xsubpp" -typemap '/home/cpan3/install/lib/perl5/5.26.0/ExtUtils/typemap' -typemap '/home/cpan3/.cpan/build/Sys-Signal-0.02-0/typemap' Signal.xs > Signal.xsc
chmod 644 "Signal.bs"
"/home/cpan3/install/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Signal.bs blib/arch/auto/Sys/Signal/Signal.bs 644
cp Signal.pm blib/lib/Sys/Signal.pm
Please specify prototyping behavior for Signal.xs (see perlxs manual)
mv Signal.xsc Signal.c
cc -c -D_REENTRANT -D_GNU_SOURCE -fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -O2 -g -DVERSION=\"0.02\" -DXS_VERSION=\"0.02\" -fPIC "-I/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE" Signal.c
Signal.xs: In function âXS_Sys__Signal_setâ:
Signal.xs:52:37: warning: passing argument 1 of âPerl_rsignal_stateâ makes pointer from integer without a cast
RETVAL->h = Perl_rsignal_state(RETVAL->signo);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:2708:28: note: expected âstruct PerlInterpreter *â but argument is of type âintâ
PERL_CALLCONV Sighandler_t Perl_rsignal_state(pTHX_ int i);
^
Signal.xs:52:18: error: too few arguments to function âPerl_rsignal_stateâ
RETVAL->h = Perl_rsignal_state(RETVAL->signo);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:2708:28: note: declared here
PERL_CALLCONV Sighandler_t Perl_rsignal_state(pTHX_ int i);
^
Signal.xs:58:25: warning: passing argument 1 of âPerl_hv_fetchâ from incompatible pointer type
elm = Perl_hv_fetch(RETVAL->sighv, name, len, TRUE);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:1220:20: note: expected âstruct PerlInterpreter *â but argument is of type âstruct HV *â
PERL_CALLCONV SV** Perl_hv_fetch(pTHX_ HV *hv, const char *key, I32 klen, I32 lval);
^
Signal.xs:58:40: warning: passing argument 2 of âPerl_hv_fetchâ from incompatible pointer type
elm = Perl_hv_fetch(RETVAL->sighv, name, len, TRUE);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:1220:20: note: expected âstruct HV *â but argument is of type âchar *â
PERL_CALLCONV SV** Perl_hv_fetch(pTHX_ HV *hv, const char *key, I32 klen, I32 lval);
^
Signal.xs:58:46: warning: passing argument 3 of âPerl_hv_fetchâ makes pointer from integer without a cast
elm = Perl_hv_fetch(RETVAL->sighv, name, len, TRUE);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:1220:20: note: expected âconst char *â but argument is of type âSTRLENâ
PERL_CALLCONV SV** Perl_hv_fetch(pTHX_ HV *hv, const char *key, I32 klen, I32 lval);
^
Signal.xs:58:11: error: too few arguments to function âPerl_hv_fetchâ
elm = Perl_hv_fetch(RETVAL->sighv, name, len, TRUE);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:1220:20: note: declared here
PERL_CALLCONV SV** Perl_hv_fetch(pTHX_ HV *hv, const char *key, I32 klen, I32 lval);
^
Signal.xs:59:35: warning: passing argument 1 of âPerl_newSVsvâ from incompatible pointer type
RETVAL->savesv = Perl_newSVsv(*elm);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:2328:19: note: expected âstruct PerlInterpreter *â but argument is of type âstruct SV *â
PERL_CALLCONV SV* Perl_newSVsv(pTHX_ SV *const old)
^
Signal.xs:59:22: error: too few arguments to function âPerl_newSVsvâ
RETVAL->savesv = Perl_newSVsv(*elm);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:2328:19: note: declared here
PERL_CALLCONV SV* Perl_newSVsv(pTHX_ SV *const old)
^
Signal.xs:60:19: warning: passing argument 1 of âPerl_sv_setsvâ from incompatible pointer type
Perl_sv_setsv(*elm, cv);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:3364:20: note: expected âstruct PerlInterpreter *â but argument is of type âstruct SV *â
PERL_CALLCONV void Perl_sv_setsv(pTHX_ SV *dstr, SV *sstr);
^
Signal.xs:60:5: error: too few arguments to function âPerl_sv_setsvâ
Perl_sv_setsv(*elm, cv);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:3364:20: note: declared here
PERL_CALLCONV void Perl_sv_setsv(pTHX_ SV *dstr, SV *sstr);
^
Signal.xs:61:17: warning: passing argument 1 of âPerl_mg_setâ from incompatible pointer type
Perl_mg_set(*elm);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:2011:19: note: expected âstruct PerlInterpreter *â but argument is of type âstruct SV *â
PERL_CALLCONV int Perl_mg_set(pTHX_ SV* sv);
^
Signal.xs:61:5: error: too few arguments to function âPerl_mg_setâ
Perl_mg_set(*elm);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:2011:19: note: declared here
PERL_CALLCONV int Perl_mg_set(pTHX_ SV* sv);
^
Signal.xs: In function âXS_Sys__Signal_DESTROYâ:
Signal.xs:74:25: warning: passing argument 1 of âPerl_hv_fetchâ from incompatible pointer type
elm = Perl_hv_fetch(s->sighv, s->name, s->len, TRUE);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:1220:20: note: expected âstruct PerlInterpreter *â but argument is of type âstruct HV *â
PERL_CALLCONV SV** Perl_hv_fetch(pTHX_ HV *hv, const char *key, I32 klen, I32 lval);
^
Signal.xs:74:35: warning: passing argument 2 of âPerl_hv_fetchâ from incompatible pointer type
elm = Perl_hv_fetch(s->sighv, s->name, s->len, TRUE);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:1220:20: note: expected âstruct HV *â but argument is of type âchar *â
PERL_CALLCONV SV** Perl_hv_fetch(pTHX_ HV *hv, const char *key, I32 klen, I32 lval);
^
Signal.xs:74:44: warning: passing argument 3 of âPerl_hv_fetchâ makes pointer from integer without a cast
elm = Perl_hv_fetch(s->sighv, s->name, s->len, TRUE);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:1220:20: note: expected âconst char *â but argument is of type âI32â
PERL_CALLCONV SV** Perl_hv_fetch(pTHX_ HV *hv, const char *key, I32 klen, I32 lval);
^
Signal.xs:74:11: error: too few arguments to function âPerl_hv_fetchâ
elm = Perl_hv_fetch(s->sighv, s->name, s->len, TRUE);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:1220:20: note: declared here
PERL_CALLCONV SV** Perl_hv_fetch(pTHX_ HV *hv, const char *key, I32 klen, I32 lval);
^
Signal.xs:78:16: warning: passing argument 1 of âPerl_sv_setsvâ from incompatible pointer type
Perl_sv_setsv(*elm, s->savesv);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:3364:20: note: expected âstruct PerlInterpreter *â but argument is of type âstruct SV *â
PERL_CALLCONV void Perl_sv_setsv(pTHX_ SV *dstr, SV *sstr);
^
Signal.xs:78:2: error: too few arguments to function âPerl_sv_setsvâ
Perl_sv_setsv(*elm, s->savesv);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:3364:20: note: declared here
PERL_CALLCONV void Perl_sv_setsv(pTHX_ SV *dstr, SV *sstr);
^
Signal.xs:79:14: warning: passing argument 1 of âPerl_mg_setâ from incompatible pointer type
Perl_mg_set(*elm);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:2011:19: note: expected âstruct PerlInterpreter *â but argument is of type âstruct SV *â
PERL_CALLCONV int Perl_mg_set(pTHX_ SV* sv);
^
Signal.xs:79:2: error: too few arguments to function âPerl_mg_setâ
Perl_mg_set(*elm);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:2011:19: note: declared here
PERL_CALLCONV int Perl_mg_set(pTHX_ SV* sv);
^
Signal.xs:83:18: warning: passing argument 1 of âPerl_rsignalâ makes pointer from integer without a cast
Perl_rsignal(s->signo, s->h);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:2703:28: note: expected âstruct PerlInterpreter *â but argument is of type âintâ
PERL_CALLCONV Sighandler_t Perl_rsignal(pTHX_ int i, Sighandler_t t);
^
Signal.xs:83:28: warning: passing argument 2 of âPerl_rsignalâ makes integer from pointer without a cast
Perl_rsignal(s->signo, s->h);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:2703:28: note: expected âintâ but argument is of type âSighandler_tâ
PERL_CALLCONV Sighandler_t Perl_rsignal(pTHX_ int i, Sighandler_t t);
^
Signal.xs:83:5: error: too few arguments to function âPerl_rsignalâ
Perl_rsignal(s->signo, s->h);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:2703:28: note: declared here
PERL_CALLCONV Sighandler_t Perl_rsignal(pTHX_ int i, Sighandler_t t);
^
Signal.xs: In function âboot_Sys__Signalâ:
Signal.xs:32:18: warning: passing argument 1 of âPerl_rsignalâ makes pointer from integer without a cast
Perl_rsignal(SIGALRM, my_sighandler);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:2703:28: note: expected âstruct PerlInterpreter *â but argument is of type âintâ
PERL_CALLCONV Sighandler_t Perl_rsignal(pTHX_ int i, Sighandler_t t);
^
Signal.xs:32:27: warning: passing argument 2 of âPerl_rsignalâ makes integer from pointer without a cast
Perl_rsignal(SIGALRM, my_sighandler);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:2703:28: note: expected âintâ but argument is of type âvoid (*)(int)â
PERL_CALLCONV Sighandler_t Perl_rsignal(pTHX_ int i, Sighandler_t t);
^
Signal.xs:32:5: error: too few arguments to function âPerl_rsignalâ
Perl_rsignal(SIGALRM, my_sighandler);
^
In file included from /home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/perl.h:5609:0,
from Signal.xs:5:
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi/CORE/proto.h:2703:28: note: declared here
PERL_CALLCONV Sighandler_t Perl_rsignal(pTHX_ int i, Sighandler_t t);
^
Makefile:330: recipe for target 'Signal.o' failed
make: *** [Signal.o] Error 1
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
build_requires:
Module Need Have
------------------- ---- ----
ExtUtils::MakeMaker 0 7.24
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
HARNESS_OPTIONS = j3
LANG = en_US.UTF-8
PATH = /usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL = /home/cpan3/install/bin/perl
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 26910
PERL5_CPAN_IS_RUNNING = 26910
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 6436,26910
PERL_CR_SMOKER_CURRENT = Sys-Signal-0.02
PERL_CR_SMOKER_RUNONCE = 1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = putty-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/cpan3/install/bin/perl
$UID/$EUID = 1004 / 1004
$GID = 1004 1004
$EGID = 1004 1004
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.16
CPAN::Meta 2.150010
Cwd 3.62
ExtUtils::CBuilder 0.280224
ExtUtils::Command 7.24
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.24
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.30
File::Spec 3.62
JSON 2.91_04
JSON::PP 2.27400
Module::Build 0.4222
Module::Signature 0.81
Parse::CPAN::Meta 2.150010
Test::Harness 3.39
Test::More 1.302083
YAML 1.23
YAML::Syck 1.30
version 0.9917
--
Summary of my perl5 (revision 5 version 26 subversion 0) configuration:
Commit id: f57d8456e7b8d6b2dad0bb49899cfdc68007b794
Platform:
osname=linux
osvers=3.16.0-4-amd64
archname=x86_64-linux-thread-multi
uname='linux digitalis 3.16.0-4-amd64 #1 smp debian 3.16.36-1+deb8u2 (2016-10-19) x86_64 gnulinux '
config_args='-Dusedevel -DDEBUGGING -Dusethreads -Dprefix=/home/cpan3/install -Uversiononly -des'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2'
optimize='-O2 -g'
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='4.9.2'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/4.9/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /lib64 /usr/lib64
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.19.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.19'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
DEBUGGING
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
PERL_TRACK_MEMPOOL
PERL_USE_DEVEL
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
Built under linux
Compiled at Apr 11 2017 21:41:23
%ENV:
PERL="/home/cpan3/install/bin/perl"
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="26910"
PERL5_CPAN_IS_RUNNING="26910"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="6436,26910"
PERL_CR_SMOKER_CURRENT="Sys-Signal-0.02"
PERL_CR_SMOKER_RUNONCE="1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan3/install/lib/perl5/site_perl/5.26.0/x86_64-linux-thread-multi
/home/cpan3/install/lib/perl5/site_perl/5.26.0
/home/cpan3/install/lib/perl5/5.26.0/x86_64-linux-thread-multi
/home/cpan3/install/lib/perl5/5.26.0