Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Python-Decorator-0.03 v5.8.8 GNU/Linux
Date: 2013-10-17T22:22:39Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Erwan Lemonnier,
This is a computer-generated report for Python-Decorator-0.03
on perl 5.8.8, created by CPAN-Reporter-1.2010.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.8/5da8/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/compile.t ....... ok
Can't locate PPI.pm in @INC (you may need to install the PPI module) (@INC contains: ../../lib/ ../lib lib/ /tmp/loop_over_bdir-27061-bKEPti/Python-Decorator-0.03-GXPScx/blib/lib /tmp/loop_over_bdir-27061-bKEPti/Python-Decorator-0.03-GXPScx/blib/arch /etc/perl /usr/local/lib/perl/5.18.1 /usr/local/share/perl/5.18.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.18 /usr/share/perl/5.18 /usr/local/lib/site_perl .) at lib/Python/Decorator.pm line 14.
BEGIN failed--compilation aborted at lib/Python/Decorator.pm line 14.
Compilation failed in require at ./t/files/test_one_decorator.pl line 4.
BEGIN failed--compilation aborted at ./t/files/test_one_decorator.pl line 4.
# Failed test 'filtered ./t/files/test_one_decorator.pl'
# at t/decorators.t line 75.
Can't locate PPI.pm in @INC (you may need to install the PPI module) (@INC contains: ../../lib/ ../lib lib/ /tmp/loop_over_bdir-27061-bKEPti/Python-Decorator-0.03-GXPScx/blib/lib /tmp/loop_over_bdir-27061-bKEPti/Python-Decorator-0.03-GXPScx/blib/arch /etc/perl /usr/local/lib/perl/5.18.1 /usr/local/share/perl/5.18.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.18 /usr/share/perl/5.18 /usr/local/lib/site_perl .) at lib/Python/Decorator.pm line 14.
BEGIN failed--compilation aborted at lib/Python/Decorator.pm line 14.
Compilation failed in require at ./t/files/test_one_decorator_with_args.pl line 4.
BEGIN failed--compilation aborted at ./t/files/test_one_decorator_with_args.pl line 4.
# Failed test 'filtered ./t/files/test_one_decorator_with_args.pl'
# at t/decorators.t line 75.
Can't locate PPI.pm in @INC (you may need to install the PPI module) (@INC contains: ../../lib/ ../lib lib/ /tmp/loop_over_bdir-27061-bKEPti/Python-Decorator-0.03-GXPScx/blib/lib /tmp/loop_over_bdir-27061-bKEPti/Python-Decorator-0.03-GXPScx/blib/arch /etc/perl /usr/local/lib/perl/5.18.1 /usr/local/share/perl/5.18.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.18 /usr/share/perl/5.18 /usr/local/lib/site_perl .) at lib/Python/Decorator.pm line 14.
BEGIN failed--compilation aborted at lib/Python/Decorator.pm line 14.
Compilation failed in require at ./t/files/test_many_decorators.pl line 4.
BEGIN failed--compilation aborted at ./t/files/test_many_decorators.pl line 4.
# Failed test 'filtered ./t/files/test_many_decorators.pl'
# at t/decorators.t line 75.
Can't locate PPI.pm in @INC (you may need to install the PPI module) (@INC contains: ../../lib/ ../lib lib/ /tmp/loop_over_bdir-27061-bKEPti/Python-Decorator-0.03-GXPScx/blib/lib /tmp/loop_over_bdir-27061-bKEPti/Python-Decorator-0.03-GXPScx/blib/arch /etc/perl /usr/local/lib/perl/5.18.1 /usr/local/share/perl/5.18.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.18 /usr/share/perl/5.18 /usr/local/lib/site_perl .) at lib/Python/Decorator.pm line 14.
BEGIN failed--compilation aborted at lib/Python/Decorator.pm line 14.
Compilation failed in require at ./t/files/test_many_decorators_with_args.pl line 4.
BEGIN failed--compilation aborted at ./t/files/test_many_decorators_with_args.pl line 4.
# Failed test 'filtered ./t/files/test_many_decorators_with_args.pl'
# at t/decorators.t line 75.
Can't locate PPI.pm in @INC (you may need to install the PPI module) (@INC contains: ../../lib/ ../lib lib/ /tmp/loop_over_bdir-27061-bKEPti/Python-Decorator-0.03-GXPScx/blib/lib /tmp/loop_over_bdir-27061-bKEPti/Python-Decorator-0.03-GXPScx/blib/arch /etc/perl /usr/local/lib/perl/5.18.1 /usr/local/share/perl/5.18.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.18 /usr/share/perl/5.18 /usr/local/lib/site_perl .) at lib/Python/Decorator.pm line 14.
BEGIN failed--compilation aborted at lib/Python/Decorator.pm line 14.
Compilation failed in require at ./t/files/test_comments.pl line 4.
BEGIN failed--compilation aborted at ./t/files/test_comments.pl line 4.
# Failed test 'filtered ./t/files/test_comments.pl'
# at t/decorators.t line 75.
# Looks like you failed 5 tests of 5.
t/decorators.t ....
Dubious, test returned 5 (wstat 1280, 0x500)
Failed 5/5 subtests
t/pod-coverage.t .. ok
t/pod.t ........... ok
Test Summary Report
-------------------
t/decorators.t (Wstat: 1280 Tests: 5 Failed: 5)
Failed tests: 1-5
Non-zero exit status: 5
Files=4, Tests=8, 1 wallclock secs ( 0.03 usr 0.00 sys + 0.36 cusr 0.05 csys = 0.44 CPU)
Result: FAIL
Failed 1/4 test programs. 5/8 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- -------
Filter::Util::Call 1.34 1.49
PPI 1.2 1.215
build_requires:
Module Need Have
------------------- ---- -------
ExtUtils::MakeMaker 0 6.81_02
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 27062
PERL5_CPAN_IS_RUNNING = 27062
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.8/5da8/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.00
CPAN::Meta 2.132830
Cwd 3.40
ExtUtils::CBuilder 0.280212
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.81_02
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.22
File::Spec 3.40
JSON 2.61
JSON::PP 2.27203
Module::Build 0.4007
Module::Signature 0.73
Parse::CPAN::Meta 1.4409
Test::Harness 3.29
Test::More 0.99
YAML 0.84
YAML::Syck 1.27
version 0.88
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=3.10-3-amd64, archname=x86_64-linux
uname='linux k83 3.10-3-amd64 #1 smp debian 3.10.11-1 (2013-09-10) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.8/5da8 -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Uuseithreads -Uuselongdouble -DDEBUGGING=-g -Dusedl -Ddlsrc=dl_dlopen.xs -Dlibs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lc -Dlibpth=/usr/lib/x86_64-linux-gnu /usr/local/lib /lib /usr/lib'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.8.1', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/lib/x86_64-linux-gnu /usr/local/lib /lib /usr/lib
libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.17'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_LARGE_FILES USE_PERLIO
Built under linux
Compiled at Oct 11 2013 05:55:57
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="27062"
PERL5_CPAN_IS_RUNNING="27062"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.8/5da8/lib/5.8.8/x86_64-linux
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.8/5da8/lib/5.8.8
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.8/5da8/lib/site_perl/5.8.8/x86_64-linux
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.8/5da8/lib/site_perl/5.8.8
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.8/5da8/lib/site_perl
.