Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL POE-Component-MXML-0.03 v5.8.9 GNU/Linux
Date: 2011-05-07T19:23:52Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear JGOFF,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9105. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sat May 7 20:23:02 2011] Trying to get 'http://cpan.mirror.local/CPAN/authors/id/J/JG/JGOFF/POE-Component-MXML-0.03.tar.gz'
[MSG] [Sat May 7 20:23:03 2011] Trying to get 'http://cpan.mirror.local/CPAN/authors/id/J/JG/JGOFF/CHECKSUMS'
[MSG] [Sat May 7 20:23:03 2011] Checksum matches for 'POE-Component-MXML-0.03.tar.gz'
[MSG] [Sat May 7 20:23:03 2011] Extracted 'POE::Component::MXML' to '/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03'
[MSG] [Sat May 7 20:23:03 2011] CPANPLUS is prefering Build.PL
[MSG] [Sat May 7 20:23:03 2011] Loading YACSmoke database "/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/cpansmoke.dat"
[MSG] [Sat May 7 20:23:03 2011] Checking if your kit is complete...
Looks good
Writing Makefile for POE::Component::MXML
[MSG] [Sat May 7 20:23:03 2011] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sat May 7 20:23:03 2011] Checking for previous PASS result for "POE-Component-MXML-0.03"
[MSG] [Sat May 7 20:23:03 2011] cp MXML.pm blib/lib/POE/Component/MXML.pm
Manifying blib/man3/POE::Component::MXML.3
[ERROR] [Sat May 7 20:23:04 2011] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/pit/thr/perl-5.8.9/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Can't locate POE/Session.pm in @INC (@INC contains: /home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/lib /home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/arch /home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/lib /home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/arch /home/cpan/pit/thr/perl-5.8.9/lib/5.8.9/x86_64-linux-thread-multi /home/cpan/pit/thr/perl-5.8.9/lib/5.8.9 /home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux-thread-multi /home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9 .) at /home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/lib/POE/Component/MXML.pm line 10.
BEGIN failed--compilation aborted at /home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/lib/POE/Component/MXML.pm line 10.
Compilation failed in require at t/01_base.t line 11.
BEGIN failed--compilation aborted at t/01_base.t line 11.
t/01_base.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests
Can't locate POE.pm in @INC (@INC contains: /home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/lib /home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/arch /home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/lib /home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/arch /home/cpan/pit/thr/perl-5.8.9/lib/5.8.9/x86_64-linux-thread-multi /home/cpan/pit/thr/perl-5.8.9/lib/5.8.9 /home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux-thread-multi /home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9 .) at t/02_tag.t line 7.
BEGIN failed--compilation aborted at t/02_tag.t line 7.
t/02_tag.t ...
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Test Summary Report
-------------------
t/01_base.t (Wstat: 512 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 2
t/02_tag.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=2, Tests=1, 1 wallclock secs ( 0.01 usr + 0.00 sys = 0.01 CPU)
Result: FAIL
Failed 2/2 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Error 2
[MSG] [Sat May 7 20:23:04 2011] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
POE::Session
POE
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'JGOFF (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'POE::Session' => '0', # or a minimum working version
'POE' => '0', # or a minimum working version
}
);
Thanks! :-)
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9105
CPANPLUS::Dist::Build 0.56
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.56
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2206
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.88
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.62.
Powered by minismokebox version 0.44
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US
LC_COLLATE = C
PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib64/java/bin:/usr/lib64/qt/bin:/usr/share/texmf/bin:.
PERL5LIB = :/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/lib:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 8202
PERL5_CPANPLUS_IS_VERSION = 0.9105
PERL5_MINISMOKEBOX = 0.44
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.8.9
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.8.9/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=linux, osvers=2.6.33.4, archname=x86_64-linux-thread-multi
uname='linux slack64 2.6.33.4 #3 smp wed may 12 23:13:09 cdt 2010 x86_64 intel(r) xeon(r) cpu e5520 @ 2.27ghz genuineintel gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.8.9 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.4.4', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64 /usr/local/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.1'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
THREADS_HAVE_PIDS USE_64_BIT_ALL USE_64_BIT_INT
USE_FAST_STDIO USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_REENTRANT_API
Built under linux
Compiled at Feb 15 2011 15:08:40
%ENV:
PERL5LIB=":/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/lib:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="8202"
PERL5_CPANPLUS_IS_VERSION="0.9105"
PERL5_MINISMOKEBOX="0.44"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.8.9"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/lib
/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/POE-Component-MXML-0.03/blib/arch
/home/cpan/pit/thr/perl-5.8.9/lib/5.8.9/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.8.9/lib/5.8.9
/home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9
.