Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: PASS File-RelDir-0.1 v5.12.0 OpenBSD
Date: 2012-03-09T00:12:19Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear DROBERTS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9120. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 /home/cpan/pit/bare/perl-5.12.0/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
ok 1 - Loaded local version of File::RelDir
................................................................................
File::RelDir->Version() Tests
ok 2 - Version call test
ok 3 - Version test (v0.1)
................................................................................
File::RelDir::Diff(dira,dirb) Tests
ok 4 - relative path test - from d:/a/b/c/here to d:/a/b/c/there
ok 5 - relative path test - from d:/a/b/c/there to d:/a/b/c/here
ok 6 - relative path test - from d:/here to d:/a/b/c/there
ok 7 - relative path test - from d:/a/b/c/there to d:/here
ok 8 - relative path test - from c:/here to d:/a/b/c/there
ok 9 - relative path test - from d:/a/b/c/there to c:/here
ok 10 - relative path test - from /tmp/a/b/c/here to /tmp/a/b/c/there
ok 11 - relative path test - from /tmp/a/b/c/there to /tmp/a/b/c/here
ok 12 - relative path test - from /tmp/here to /tmp/a/b/c/there
ok 13 - relative path test - from /tmp/a/b/c/there to /tmp/here
ok 14 - relative path test - from /var/here to /tmp/a/b/c/there
ok 15 - relative path test - from /tmp/a/b/c/there to /var/here
................................................................................
File::RelDir->New(dira) Tests
ok 16 - New call succeeded
................................................................................
File::RelDir->Path(dirb) Tests
ok 17 - relative path test - from /tmp/a/b/c/here to /tmp/a/b/c/there
ok 18 - New call succeeded
ok 19 - relative path test - from d:/a/b/c/here to d:/a/b/c/there
ok 20 - New call succeeded - windows path with \ seperators
ok 21 - relative path test - from d:\a\b\c\here to d:\a\b\c\there
ok 22 - relative path test - different case of drive letter - from d:\a\b\c\here to D:\a\b\c\there
ok 23 - relative path test - different case of drive letter - from d:\a\b\c\here to D:/a/b/c/there
ok 24 - relative path test - different case of path - from d:\a\b\c\here to D:\A\B\C\THERE
ok 25 - relative path test - different case of path - from d:\a\b\c\here to D:/A/B/C/THERE
ok 26 - New call succeeded - windows path with / seperators
ok 27 - relative path test - from d:/a/b/c/here to d:\a\b\c\there
ok 28 - relative path test - different case of drive letter - from d:/a/b/c/here to D:\a\b\c\there
ok 29 - relative path test - different case of drive letter - from d:/a/b/c/here to D:/a/b/c/there
ok 30 - relative path test - different case of path - from d:/a/b/c/here to D:\A\B\C\THERE
ok 31 - relative path test - different case of path - from d:/a/b/c/here to D:/A/B/C/THERE
................................................................................
ok 32 - New call succeeded
ok 33 - relative path test - from /tmp/a/b/c/here to /tmp/d/e/f/there
ok 34 - New call succeeded
ok 35 - relative path test - from /tmp/here to /tmp/here
ok 36 - relative path test - from /tmp/here to /tmp
ok 37 - relative path test - from /tmp/here to /tmp/there
ok 38 - relative path test - from /tmp/here to /tmp/there/where
ok 39 - relative path test - from /tmp/here to /tmp/here/anywhere
ok 40 - relative path test - from /tmp/here to /TMP/here
ok 41 - relative path test - from /tmp/here to /TMP
ok 42 - relative path test - from /tmp/here to /TMP/there
ok 43 - relative path test - from /tmp/here to /TMP/there/where
1..43
different file systems or not absolute paths at test.pl line 59
different file systems or not absolute paths at test.pl line 60
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 6.62 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9120
CPANPLUS::Dist::Build 0.62
Cwd 3.33
ExtUtils::CBuilder 0.280205
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.62
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.15
File::Spec 3.33
Module::Build 0.40
Test::Harness 3.23
Test::More 0.98
version 0.96
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.70.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/File-RelDir-0.1/blib/lib:/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/File-RelDir-0.1/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 17984
PERL5_CPANPLUS_IS_VERSION = 0.9120
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.12.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.12.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 0) configuration:
Platform:
osname=openbsd, osvers=5.0, archname=OpenBSD.amd64-openbsd
uname='openbsd oliphant.bingosnet.co.uk 5.0 generic#53 amd64 '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.12.0'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 ', gccosandvers='openbsd5.0'
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.60.1, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MYMALLOC PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES
USE_PERLIO USE_PERL_ATOF
Built under openbsd
Compiled at Nov 9 2011 23:29:51
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/File-RelDir-0.1/blib/lib:/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/File-RelDir-0.1/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="17984"
PERL5_CPANPLUS_IS_VERSION="0.9120"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.12.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/File-RelDir-0.1/blib/lib
/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/File-RelDir-0.1/blib/arch
/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0/OpenBSD.amd64-openbsd
/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0
/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0/OpenBSD.amd64-openbsd
/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0
.