Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Net-Write-Fast-0.15 v5.8.9 GNU/Linux
Date: 2015-02-20T06:20:09Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Patrice Auffret,
This is a computer-generated report for Net-Write-Fast-0.15
on perl 5.8.9, created by CPAN-Reporter-1.2011.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
"/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Fast.bs blib/arch/auto/Net/Write/Fast/Fast.bs 644
PERL_DL_NONLAZY=1 "/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Test 1 got: "0" (t/01-module.t at line 6)
# Expected: "1" (Can't locate Time/Interval.pm in @INC (@INC contains: /tmp/loop_over_bdir-25806-4xEumZ/Net-Write-Fast-0.15-7W5J5G/blib/lib /tmp/loop_over_bdir-25806-4xEumZ/Net-Write-Fast-0.15-7W5J5G/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/5.8.9/x86_64-linux /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/5.8.9 /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/site_perl/5.8.9/x86_64-linux /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/site_perl/5.8.9 .) at /tmp/loop_over_bdir-25806-4xEumZ/Net-Write-Fast-0.15-7W5J5G/blib/lib/Net/Write/Fast.pm line 31.
#BEGIN failed--compilation aborted at /tmp/loop_over_bdir-25806-4xEumZ/Net-Write-Fast-0.15-7W5J5G/blib/lib/Net/Write/Fast.pm line 31.
#Compilation failed in require at (eval 2) line 1.
#BEGIN failed--compilation aborted at (eval 2) line 1.
#)
# t/01-module.t line 6 is: 1,
t/01-module.t ............
Failed 1/1 subtests
# Failed test 'Pod coverage on Net::Write::Fast'
# at t/02-pod-coverage.t line 8.
# Net::Write::Fast: requiring 'Net::Write::Fast' failed
# Looks like you failed 1 test of 1.
t/02-pod-coverage.t ......
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/03-test-pod.t .......... ok
Can't locate Time/Interval.pm in @INC (@INC contains: /tmp/loop_over_bdir-25806-4xEumZ/Net-Write-Fast-0.15-7W5J5G/blib/lib /tmp/loop_over_bdir-25806-4xEumZ/Net-Write-Fast-0.15-7W5J5G/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/5.8.9/x86_64-linux /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/5.8.9 /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/site_perl/5.8.9/x86_64-linux /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/site_perl/5.8.9 .) at /tmp/loop_over_bdir-25806-4xEumZ/Net-Write-Fast-0.15-7W5J5G/blib/lib/Net/Write/Fast.pm line 31.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-25806-4xEumZ/Net-Write-Fast-0.15-7W5J5G/blib/lib/Net/Write/Fast.pm line 31.
Compilation failed in require at t/04-l4-send-tcp-syn4.t line 4.
BEGIN failed--compilation aborted at t/04-l4-send-tcp-syn4.t line 4.
t/04-l4-send-tcp-syn4.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests
Can't locate Time/Interval.pm in @INC (@INC contains: /tmp/loop_over_bdir-25806-4xEumZ/Net-Write-Fast-0.15-7W5J5G/blib/lib /tmp/loop_over_bdir-25806-4xEumZ/Net-Write-Fast-0.15-7W5J5G/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/5.8.9/x86_64-linux /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/5.8.9 /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/site_perl/5.8.9/x86_64-linux /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/site_perl/5.8.9 .) at /tmp/loop_over_bdir-25806-4xEumZ/Net-Write-Fast-0.15-7W5J5G/blib/lib/Net/Write/Fast.pm line 31.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-25806-4xEumZ/Net-Write-Fast-0.15-7W5J5G/blib/lib/Net/Write/Fast.pm line 31.
Compilation failed in require at t/05-l4-send-tcp-syn6.t line 4.
BEGIN failed--compilation aborted at t/05-l4-send-tcp-syn6.t line 4.
t/05-l4-send-tcp-syn6.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests
Test Summary Report
-------------------
t/01-module.t (Wstat: 0 Tests: 1 Failed: 1)
Failed test: 1
t/02-pod-coverage.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/04-l4-send-tcp-syn4.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 1 tests but ran 0.
t/05-l4-send-tcp-syn6.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 1 tests but ran 0.
Files=5, Tests=3, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.12 cusr 0.02 csys = 0.18 CPU)
Result: FAIL
Failed 4/5 test programs. 2/3 subtests failed.
Makefile:964: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 2
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- -------- --------
DynaLoader 0 1.09
Exporter 0 5.70
perl 5.006001 5.008009
build_requires:
Module Need Have
------------------- -------- --------
ExtUtils::MakeMaker 0 7.05_13
configure_requires:
Module Need Have
------------------- -------- --------
ExtUtils::MakeMaker 0 7.05_13
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 25809
PERL5_CPAN_IS_RUNNING = 25809
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- ------------
CPAN 2.05
CPAN::Meta 2.143240
Cwd 3.47
ExtUtils::CBuilder 0.280220
ExtUtils::Command 7.05_13
ExtUtils::Install 1.54
ExtUtils::MakeMaker 7.05_13
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.24
File::Spec 3.47
JSON 2.90
JSON::PP 2.27203
Module::Build 0.4211
Module::Signature 0.73
Parse::CPAN::Meta 1.4414
Test::Harness 3.35
Test::More 1.301001_098
YAML 1.14
YAML::Syck 1.29
version 0.9912
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=linux, osvers=3.16.0-4-amd64, archname=x86_64-linux
uname='linux k83 3.16.0-4-amd64 #1 smp debian 3.16.7-ckt2-1 (2014-12-08) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8 -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Uuseithreads -Uuselongdouble -DDEBUGGING=-g -Dusedl -Ddlsrc=dl_dlopen.xs -Dlibs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lc -Dlibpth=/usr/lib/x86_64-linux-gnu /usr/local/lib /lib /usr/lib'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.9.2', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/lib/x86_64-linux-gnu /usr/local/lib /lib /usr/lib
libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.19'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_FAST_STDIO USE_LARGE_FILES USE_PERLIO
Built under linux
Compiled at Jan 10 2015 12:03:33
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="25809"
PERL5_CPAN_IS_RUNNING="25809"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/5.8.9/x86_64-linux
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/5.8.9
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/site_perl/5.8.9/x86_64-linux
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.9/5da8/lib/site_perl/5.8.9
.