Back
From: metabase:user:0d96120c-29e2-11e5-b049-ede3035d37de
Subject: FAIL BioX-CLPM-0.01 v5.18.4 GNU/Linux
Date: 2015-07-23T09:37:44Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Nathan Mark Crabtree,
This is a computer-generated report for BioX-CLPM-0.01
on perl 5.18.4, created by CPAN-Reporter-1.2014.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from './Build test':
# Failed test 'use BioX::CLPM;'
# at t/00.load.t line 4.
# Tried to use 'BioX::CLPM'.
# Error: Can't locate Class/Std.pm in @INC (you may need to install the Class::Std module) (@INC contains: /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib /data/.cpan/build/BioX-CLPM-orrfDy/blib/arch /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5 /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5 /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/site_perl/5.18.4/x86_64-linux-thread-multi-ld /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/site_perl/5.18.4 /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/x86_64-linux-thread-multi-ld /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4 .) at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Base.pm line 2.
# BEGIN failed--compilation aborted at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Base.pm line 2.
# Compilation failed in require at (eval 6) line 2.
# ...propagated at /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/base.pm line 84.
# BEGIN failed--compilation aborted at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM.pm line 2.
# Compilation failed in require at t/00.load.t line 4.
# BEGIN failed--compilation aborted at t/00.load.t line 4.
# Failed test 'use BioX::CLPM::Engine;'
# at t/00.load.t line 5.
# Tried to use 'BioX::CLPM::Engine'.
# Error: Attempt to reload BioX/CLPM/Base.pm aborted.
# Compilation failed in require at (eval 8) line 2.
# ...propagated at /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/base.pm line 84.
# BEGIN failed--compilation aborted at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Engine.pm line 2.
# Compilation failed in require at t/00.load.t line 5.
# BEGIN failed--compilation aborted at t/00.load.t line 5.
# Failed test 'use BioX::CLPM::Peaks;'
# at t/00.load.t line 6.
# Tried to use 'BioX::CLPM::Peaks'.
# Error: Can't locate Class/Std.pm in @INC (you may need to install the Class::Std module) (@INC contains: /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib /data/.cpan/build/BioX-CLPM-orrfDy/blib/arch /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5 /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5 /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/site_perl/5.18.4/x86_64-linux-thread-multi-ld /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/site_perl/5.18.4 /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/x86_64-linux-thread-multi-ld /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4 .) at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Peaks.pm line 3.
# BEGIN failed--compilation aborted at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Peaks.pm line 3.
# Compilation failed in require at t/00.load.t line 6.
# BEGIN failed--compilation aborted at t/00.load.t line 6.
# Failed test 'use BioX::CLPM::Linker;'
# at t/00.load.t line 7.
# Tried to use 'BioX::CLPM::Linker'.
# Error: Attempt to reload BioX/CLPM/Base.pm aborted.
# Compilation failed in require at (eval 11) line 2.
# ...propagated at /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/base.pm line 84.
# BEGIN failed--compilation aborted at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Linker.pm line 2.
# Compilation failed in require at t/00.load.t line 7.
# BEGIN failed--compilation aborted at t/00.load.t line 7.
# Failed test 'use BioX::CLPM::Enzyme;'
# at t/00.load.t line 8.
# Tried to use 'BioX::CLPM::Enzyme'.
# Error: Attempt to reload BioX/CLPM/Base.pm aborted.
# Compilation failed in require at (eval 13) line 2.
# ...propagated at /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/base.pm line 84.
# BEGIN failed--compilation aborted at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Enzyme.pm line 2.
# Compilation failed in require at t/00.load.t line 8.
# BEGIN failed--compilation aborted at t/00.load.t line 8.
# Failed test 'use BioX::CLPM::Amino;'
# at t/00.load.t line 9.
# Tried to use 'BioX::CLPM::Amino'.
# Error: Attempt to reload BioX/CLPM/Base.pm aborted.
# Compilation failed in require at (eval 15) line 2.
# ...propagated at /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/base.pm line 84.
# BEGIN failed--compilation aborted at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Amino.pm line 2.
# Compilation failed in require at t/00.load.t line 9.
# BEGIN failed--compilation aborted at t/00.load.t line 9.
# Failed test 'use BioX::CLPM::Sequence;'
# at t/00.load.t line 10.
# Tried to use 'BioX::CLPM::Sequence'.
# Error: Attempt to reload BioX/CLPM/Base.pm aborted.
# Compilation failed in require at (eval 17) line 2.
# ...propagated at /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/base.pm line 84.
# BEGIN failed--compilation aborted at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Sequence.pm line 2.
# Compilation failed in require at t/00.load.t line 10.
# BEGIN failed--compilation aborted at t/00.load.t line 10.
# Failed test 'use BioX::CLPM::Fragments;'
# at t/00.load.t line 11.
# Tried to use 'BioX::CLPM::Fragments'.
# Error: Attempt to reload BioX/CLPM/Base.pm aborted.
# Compilation failed in require at (eval 19) line 2.
# ...propagated at /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/base.pm line 84.
# BEGIN failed--compilation aborted at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Fragments.pm line 2.
# Compilation failed in require at t/00.load.t line 11.
# BEGIN failed--compilation aborted at t/00.load.t line 11.
# Failed test 'use BioX::CLPM::Fragments::Simple;'
# at t/00.load.t line 12.
# Tried to use 'BioX::CLPM::Fragments::Simple'.
# Error: Can't locate Class/Std.pm in @INC (you may need to install the Class::Std module) (@INC contains: /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib /data/.cpan/build/BioX-CLPM-orrfDy/blib/arch /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5 /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5 /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/site_perl/5.18.4/x86_64-linux-thread-multi-ld /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/site_perl/5.18.4 /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/x86_64-linux-thread-multi-ld /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4 .) at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Fragments/Simple.pm line 3.
# BEGIN failed--compilation aborted at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Fragments/Simple.pm line 3.
# Compilation failed in require at t/00.load.t line 12.
# BEGIN failed--compilation aborted at t/00.load.t line 12.
# Failed test 'use BioX::CLPM::Fragments::Linked;'
# at t/00.load.t line 13.
# Tried to use 'BioX::CLPM::Fragments::Linked'.
# Error: Can't locate Class/Std.pm in @INC (you may need to install the Class::Std module) (@INC contains: /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib /data/.cpan/build/BioX-CLPM-orrfDy/blib/arch /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5 /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5 /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/site_perl/5.18.4/x86_64-linux-thread-multi-ld /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/site_perl/5.18.4 /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/x86_64-linux-thread-multi-ld /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4 .) at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Fragments/Linked.pm line 3.
# BEGIN failed--compilation aborted at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Fragments/Linked.pm line 3.
# Compilation failed in require at t/00.load.t line 13.
# BEGIN failed--compilation aborted at t/00.load.t line 13.
# Failed test 'use BioX::CLPM::Matches;'
# at t/00.load.t line 14.
# Tried to use 'BioX::CLPM::Matches'.
# Error: Can't locate Class/Std.pm in @INC (you may need to install the Class::Std module) (@INC contains: /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib /data/.cpan/build/BioX-CLPM-orrfDy/blib/arch /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5 /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5 /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/site_perl/5.18.4/x86_64-linux-thread-multi-ld /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/site_perl/5.18.4 /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/x86_64-linux-thread-multi-ld /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4 .) at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Matches.pm line 3.
# BEGIN failed--compilation aborted at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Matches.pm line 3.
# Compilation failed in require at t/00.load.t line 14.
# BEGIN failed--compilation aborted at t/00.load.t line 14.
# Failed test 'use BioX::CLPM::Base;'
# at t/00.load.t line 15.
# Tried to use 'BioX::CLPM::Base'.
# Error: Attempt to reload BioX/CLPM/Base.pm aborted.
# Compilation failed in require at t/00.load.t line 15.
# BEGIN failed--compilation aborted at t/00.load.t line 15.
# Testing BioX::CLPM
# Looks like you failed 12 tests of 12.
t/00.load.t ...
Dubious, test returned 12 (wstat 3072, 0xc00)
Failed 12/12 subtests
# Failed test 'use BioX::CLPM::Amino;'
# at t/01.amino.t line 4.
# Tried to use 'BioX::CLPM::Amino'.
# Error: Can't locate Class/Std.pm in @INC (you may need to install the Class::Std module) (@INC contains: /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib /data/.cpan/build/BioX-CLPM-orrfDy/blib/arch /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5 /home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld /home/perltest/sysperl/lib/perl5 /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/site_perl/5.18.4/x86_64-linux-thread-multi-ld /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/site_perl/5.18.4 /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/x86_64-linux-thread-multi-ld /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4 .) at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Base.pm line 2.
# BEGIN failed--compilation aborted at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Base.pm line 2.
# Compilation failed in require at (eval 6) line 2.
# ...propagated at /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/base.pm line 84.
# BEGIN failed--compilation aborted at /data/.cpan/build/BioX-CLPM-orrfDy/blib/lib/BioX/CLPM/Amino.pm line 2.
# Compilation failed in require at t/01.amino.t line 4.
# BEGIN failed--compilation aborted at t/01.amino.t line 4.
Can't locate object method "new" via package "BioX::CLPM::Amino" at t/01.amino.t line 7.
# Looks like you planned 2 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 255 just after 1.
t/01.amino.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/2 subtests
Test Summary Report
-------------------
t/00.load.t (Wstat: 3072 Tests: 12 Failed: 12)
Failed tests: 1-12
Non-zero exit status: 12
t/01.amino.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 2 tests but ran 1.
Files=2, Tests=13, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.03 cusr 0.00 csys = 0.05 CPU)
Result: FAIL
Failed 2/2 test programs. 13/13 subtests failed.
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
---------- ---- --------
Test::More 0 1.001014
version 0 0.9912
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
NONINTERACTIVE_TESTING = 1
PATH = /home/perltest/sysperl/bin:/home/perltest/perl5/perlbrew/bin:/home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/bin:/home/perltest/perltest/bin:/home/perltest/perl5/perlbrew/bin:/home/perltest/perl5/perlbrew/perls/perl-5.18.4-ld/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/perltest/perltest/bin
PERL5LIB = /home/perltest/sysperl/lib/perl5:
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 17592
PERL5_CPAN_IS_RUNNING = 17592
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 2733,17592
PERLBREW_BASHRC_VERSION = 0.73
PERLBREW_HOME = /home/perltest/.perlbrew
PERLBREW_LIB =
PERLBREW_MANPATH = /home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/man
PERLBREW_PATH = /home/perltest/perl5/perlbrew/bin:/home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/bin
PERLBREW_PERL = perl-5.18.4-thread-multi-ld
PERLBREW_ROOT = /home/perltest/perl5/perlbrew
PERLBREW_VERSION = 0.73
PERL_CR_SMOKER_CURRENT = BioX-CLPM-0.01
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/perltest/sysperl:
PERL_MB_OPT = --install_base "//home/perltest/sysperl"
PERL_MM_OPT = INSTALL_BASE=/home/perltest/sysperl
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /data/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/bin/perl
$UID/$EUID = 2000 / 2000
$GID = 2000 2000
$EGID = 2000 2000
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.00
CPAN::Meta 2.150005
Cwd 3.40
ExtUtils::CBuilder 0.280210
ExtUtils::Command 1.17
ExtUtils::Install 1.59
ExtUtils::MakeMaker 6.66
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.18
File::Spec 3.40
JSON 2.90
JSON::PP 2.27202
Module::Build 0.4214
Module::Signature n/a
Parse::CPAN::Meta 1.4417
Test::Harness 3.35
Test::More 1.001014
YAML 1.15
YAML::Syck n/a
version 0.9912
--
Summary of my perl5 (revision 5 version 18 subversion 4) configuration:
Platform:
osname=linux, osvers=3.19.0-18-generic, archname=x86_64-linux-thread-multi-ld
uname='linux perltest.antelope.net 3.19.0-18-generic #18-ubuntu smp tue may 19 18:31:35 utc 2015 x86_64 x86_64 x86_64 gnulinux '
config_args='-de -Dprefix=/home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld -Dusemultiplicity -Duselongdouble -Dusethreads -Aeval:scriptdir=/home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/bin'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.9.2', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=libc-2.21.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.21'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LONG_DOUBLE USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 1.38
Built under linux
Compiled at Jul 19 2015 23:12:48
%ENV:
PERL5LIB="/home/perltest/sysperl/lib/perl5:"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="17592"
PERL5_CPAN_IS_RUNNING="17592"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="2733,17592"
PERLBREW_BASHRC_VERSION="0.73"
PERLBREW_HOME="/home/perltest/.perlbrew"
PERLBREW_LIB=""
PERLBREW_MANPATH="/home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/man"
PERLBREW_PATH="/home/perltest/perl5/perlbrew/bin:/home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/bin"
PERLBREW_PERL="perl-5.18.4-thread-multi-ld"
PERLBREW_ROOT="/home/perltest/perl5/perlbrew"
PERLBREW_VERSION="0.73"
PERL_CR_SMOKER_CURRENT="BioX-CLPM-0.01"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/perltest/sysperl:"
PERL_MB_OPT="--install_base "//home/perltest/sysperl""
PERL_MM_OPT="INSTALL_BASE=/home/perltest/sysperl"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/perltest/sysperl/lib/perl5/x86_64-linux-thread-multi-ld
/home/perltest/sysperl/lib/perl5
/home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/site_perl/5.18.4/x86_64-linux-thread-multi-ld
/home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/site_perl/5.18.4
/home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4/x86_64-linux-thread-multi-ld
/home/perltest/perl5/perlbrew/perls/perl-5.18.4-thread-multi-ld/lib/5.18.4
.