CORBA-omniORB v0.9 Perl 5 v5.13.2 i686-linux

Status

Unknown

From

Serguei Trouchelle (STRO)

Dist

CORBA-omniORB v0.9

Platform

Perl 5 v5.13.2 i686-linux

Date

2010-07-14 04:44:15

ID

74684b74-8f02-11df-b1b5-2ac19053833c

This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--
Dear Peter S. Housel,

This is a computer-generated report for CORBA-omniORB-0.9
on perl 5.13.2, created by CPAN-Reporter-1.1711.

Thank you for uploading your work to CPAN.  However, attempting to
test your distribution gave an inconclusive result.

This could be because your distribution had an error during the make/build
stage, did not define tests, tests could not be found, because your tests were
interrupted before they finished, or because the results of the tests could not
be parsed.  You may wish to consult the CPAN Testers Wiki:

http://wiki.cpantesters.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester:

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make':

cp omniORB.pm blib/lib/CORBA/omniORB.pm
cp omniORB/LongLong.pm blib/lib/CORBA/omniORB/LongLong.pm
cp omniORB/internals.ps blib/lib/CORBA/omniORB/internals.ps
cp omniORB/LongDouble.pm blib/lib/CORBA/omniORB/LongDouble.pm
cp omniORB/ULongLong.pm blib/lib/CORBA/omniORB/ULongLong.pm
cp omniORB/Fixed.pm blib/lib/CORBA/omniORB/Fixed.pm
cp omniORB/mapping.pod blib/lib/CORBA/omniORB/mapping.pod
cp omniORB/internals.pod blib/lib/CORBA/omniORB/internals.pod
cp omniORB/internals.fig blib/lib/CORBA/omniORB/internals.fig
make[1]: Entering directory `/home/stro/cpan/build/5.13.2/CORBA-omniORB-0.9-qTYHhT/omnithreads'
cp omnithreads.pm ../blib/lib/omnithreads.pm
make[2]: Entering directory `/home/stro/cpan/build/5.13.2/CORBA-omniORB-0.9-qTYHhT/omnithreads/shared'
cp shared.pm ../../blib/lib/omnithreads/shared.pm
/home/stro/perl/perl5132/bin/perl /home/stro/perl/perl5132/lib/5.13.2/ExtUtils/xsubpp  -typemap /home/stro/perl/perl5132/lib/5.13.2/ExtUtils/typemap  shared.xs > shared.xsc && mv shared.xsc shared.c
cc -c   -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g   -DVERSION=\"0.94_01\" -DXS_VERSION=\"0.94_01\" -fPIC "-I/home/stro/perl/perl5132/lib/5.13.2/i686-linux/CORE"  -DHAS_PPPORT_H shared.c
shared.xs:136:2: error: #error Unsupported threading model
shared.xs:152: error: ‘void’ must be the only parameter
shared.xs:189: error: expected specifier-qualifier-list before ‘perl_mutex’
shared.xs: In function ‘recursive_lock_release’:
shared.xs:220: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs:220: error: expected expression before ‘)’ token
shared.xs:224: error: ‘recursive_lock_t’ has no member named ‘locks’
shared.xs:225: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs: In function ‘recursive_lock_acquire’:
shared.xs:237: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs:237: error: expected expression before ‘)’ token
shared.xs:238: error: ‘recursive_lock_t’ has no member named ‘locks’
shared.xs:242: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs:249: error: ‘recursive_lock_t’ has no member named ‘locks’
shared.xs:250: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs:250: error: expected expression before ‘;’ token
shared.xs: At top level:
shared.xs:290: error: expected specifier-qualifier-list before ‘perl_cond’
shared.xs: In function ‘S_get_userlock’:
shared.xs:368: error: expected expression before ‘;’ token
shared.xs:369: error: expected expression before ‘=’ token
shared.xs:377: error: expected expression before ‘=’ token
shared.xs: In function ‘Perl_sharedsv_associate’:
shared.xs:429: error: expected expression before ‘;’ token
shared.xs: In function ‘S_sharedsv_new_shared’:
shared.xs:488: error: expected expression before ‘;’ token
shared.xs:494: error: expected expression before ‘=’ token
shared.xs:498: error: expected expression before ‘=’ token
shared.xs: In function ‘S_sharedsv_dec’:
shared.xs:535: error: expected expression before ‘;’ token
shared.xs:536: error: expected expression before ‘=’ token
shared.xs:538: error: expected expression before ‘=’ token
shared.xs: At top level:
shared.xs:578: error: expected ‘)’ before ‘*’ token
shared.xs: In function ‘sharedsv_scalar_store’:
shared.xs:715: error: expected expression before ‘;’ token
shared.xs:723: error: expected expression before ‘=’ token
shared.xs:734: error: expected expression before ‘=’ token
shared.xs:742: error: expected expression before ‘=’ token
shared.xs:749: error: expected expression before ‘=’ token
shared.xs: In function ‘sharedsv_scalar_mg_set’:
shared.xs:765: error: expected expression before ‘;’ token
shared.xs:766: error: expected expression before ‘=’ token
shared.xs:768: error: expected expression before ‘=’ token
shared.xs: In function ‘sharedsv_elem_mg_FETCH’:
shared.xs:835: error: expected expression before ‘;’ token
shared.xs:842: error: expected expression before ‘=’ token
shared.xs:852: error: expected expression before ‘=’ token
shared.xs:855: error: expected expression before ‘=’ token
shared.xs: In function ‘sharedsv_elem_mg_STORE’:
shared.xs:881: error: expected expression before ‘;’ token
shared.xs:892: error: expected expression before ‘=’ token
shared.xs:901: error: expected expression before ‘=’ token
shared.xs:904: error: expected expression before ‘=’ token
shared.xs: In function ‘sharedsv_elem_mg_DELETE’:
shared.xs:916: error: expected expression before ‘;’ token
shared.xs:924: error: expected expression before ‘=’ token
shared.xs:933: error: expected expression before ‘=’ token
shared.xs:936: error: expected expression before ‘=’ token
shared.xs: In function ‘sharedsv_array_mg_FETCHSIZE’:
shared.xs:972: error: expected expression before ‘;’ token
shared.xs:975: error: expected expression before ‘=’ token
shared.xs:983: error: expected expression before ‘=’ token
shared.xs: In function ‘sharedsv_array_mg_CLEAR’:
shared.xs:992: error: expected expression before ‘;’ token
shared.xs:994: error: expected expression before ‘=’ token
shared.xs:1001: error: expected expression before ‘=’ token
shared.xs: At top level:
shared.xs:1046: warning: initialization from incompatible pointer type
shared.xs: In function ‘Perl_sharedsv_init’:
shared.xs:1110: error: expected expression before ‘;’ token
shared.xs:1114: error: expected expression before ‘=’ token
shared.xs: In function ‘XS_omnithreads__shared__tie_PUSH’:
shared.xs:1127: error: expected expression before ‘;’ token
shared.xs:1136: error: expected expression before ‘=’ token
shared.xs:1139: error: expected expression before ‘=’ token
shared.xs: In function ‘XS_omnithreads__shared__tie_UNSHIFT’:
shared.xs:1146: error: expected expression before ‘;’ token
shared.xs:1150: error: expected expression before ‘=’ token
shared.xs:1152: error: expected expression before ‘=’ token
shared.xs:1157: error: expected expression before ‘=’ token
shared.xs:1160: error: expected expression before ‘=’ token
shared.xs: In function ‘XS_omnithreads__shared__tie_POP’:
shared.xs:1168: error: expected expression before ‘;’ token
shared.xs:1172: error: expected expression before ‘=’ token
shared.xs:1174: error: expected expression before ‘=’ token
shared.xs: In function ‘XS_omnithreads__shared__tie_SHIFT’:
shared.xs:1184: error: expected expression before ‘;’ token
shared.xs:1188: error: expected expression before ‘=’ token
shared.xs:1190: error: expected expression before ‘=’ token
shared.xs: In function ‘XS_omnithreads__shared__tie_EXTEND’:
shared.xs:1200: error: expected expression before ‘;’ token
shared.xs:1202: error: expected expression before ‘=’ token
shared.xs:1204: error: expected expression before ‘=’ token
shared.xs: In function ‘XS_omnithreads__shared__tie_STORESIZE’:
shared.xs:1209: error: expected expression before ‘;’ token
shared.xs:1211: error: expected expression before ‘=’ token
shared.xs:1213: error: expected expression before ‘=’ token
shared.xs: In function ‘XS_omnithreads__shared__tie_EXISTS’:
shared.xs:1221: error: expected expression before ‘;’ token
shared.xs:1225: error: expected expression before ‘=’ token
shared.xs:1231: error: expected expression before ‘=’ token
shared.xs:1234: error: expected expression before ‘=’ token
shared.xs: In function ‘XS_omnithreads__shared__tie_FIRSTKEY’:
shared.xs:1242: error: expected expression before ‘;’ token
shared.xs:1248: error: expected expression before ‘=’ token
shared.xs:1253: error: expected expression before ‘=’ token
shared.xs:1256: error: expected expression before ‘=’ token
shared.xs: In function ‘XS_omnithreads__shared__tie_NEXTKEY’:
shared.xs:1265: error: expected expression before ‘;’ token
shared.xs:1271: error: expected expression before ‘=’ token
shared.xs:1275: error: expected expression before ‘=’ token
shared.xs:1278: error: expected expression before ‘=’ token
shared.xs: In function ‘XS_omnithreads__shared_cond_wait_enabled’:
shared.xs:1354: error: ‘perl_cond’ undeclared (first use in this function)
shared.xs:1354: error: (Each undeclared identifier is reported only once
shared.xs:1354: error: for each function it appears in.)
shared.xs:1354: error: ‘user_condition’ undeclared (first use in this function)
shared.xs:1372: error: ‘user_lock’ has no member named ‘user_cond’
shared.xs:1383: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs:1383: error: expected expression before ‘)’ token
shared.xs:1393: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs:1394: error: ‘recursive_lock_t’ has no member named ‘locks’
shared.xs:1395: error: ‘recursive_lock_t’ has no member named ‘locks’
shared.xs:1399: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs:1403: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs:1403: error: expected expression before ‘;’ token
shared.xs:1404: error: ‘recursive_lock_t’ has no member named ‘locks’
shared.xs: In function ‘XS_omnithreads__shared_cond_timedwait_enabled’:
shared.xs:1416: error: ‘perl_cond’ undeclared (first use in this function)
shared.xs:1416: error: ‘user_condition’ undeclared (first use in this function)
shared.xs:1434: error: ‘user_lock’ has no member named ‘user_cond’
shared.xs:1445: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs:1445: error: expected expression before ‘)’ token
shared.xs:1453: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs:1454: error: ‘recursive_lock_t’ has no member named ‘locks’
shared.xs:1455: error: ‘recursive_lock_t’ has no member named ‘locks’
shared.xs:1460: error: ‘recursive_lock_t’ has no member named ‘mutex’
shared.xs:1461: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs:1465: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs:1465: error: expected expression before ‘;’ token
shared.xs:1466: error: ‘recursive_lock_t’ has no member named ‘locks’
shared.xs: In function ‘XS_omnithreads__shared_cond_signal_enabled’:
shared.xs:1494: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs:1494: error: expected expression before ‘)’ token
shared.xs: In function ‘XS_omnithreads__shared_cond_broadcast_enabled’:
shared.xs:1515: error: ‘recursive_lock_t’ has no member named ‘owner’
shared.xs:1515: error: expected expression before ‘)’ token
shared.xs: In function ‘XS_omnithreads__shared_bless’:
shared.xs:1549: error: expected expression before ‘;’ token
shared.xs:1551: error: expected expression before ‘=’ token
shared.xs:1556: error: expected expression before ‘=’ token
shared.xs: In function ‘boot_omnithreads__shared’:
shared.xs:1576: error: ‘void’ must be the only parameter
make[2]: *** [shared.o] Error 1
make[2]: Leaving directory `/home/stro/cpan/build/5.13.2/CORBA-omniORB-0.9-qTYHhT/omnithreads/shared'
make[1]: *** [subdirs] Error 2
make[1]: Leaving directory `/home/stro/cpan/build/5.13.2/CORBA-omniORB-0.9-qTYHhT/omnithreads'
make: *** [subdirs] Error 2

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module Need Have   
    ------ ---- -------
    Error  0.13 0.17016


------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_US.UTF-8
    PATH = /usr/local/bin:/usr/bin:/bin:/usr/games
    PERL5LIB = 
    PERL5OPT = 
    PERL5_CPANPLUS_IS_RUNNING = 25551
    PERL5_CPAN_IS_EXECUTING = /home/stro/cpan/build/5.13.2/CORBA-omniORB-0.9-qTYHhT/Makefile.PL
    PERL5_CPAN_IS_RUNNING = 25551
    PERL5_CPAN_IS_RUNNING_IN_RECURSION = 2972,25551
    PERL_CR_SMOKER_CURRENT = CORBA-omniORB-0.9
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = xterm

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /home/stro/perl/perl5132/bin/perl
    $UID/$EUID = 1000 / 1000
    $GID = 1000 20 24 25 29 44 46 1000
    $EGID = 1000 20 24 25 29 44 46 1000

Perl module toolchain versions installed:

    Module              Have  
    ------------------- ------
    CPAN                1.9304
    Cwd                 3.31  
    ExtUtils::CBuilder  0.2703
    ExtUtils::Command   1.16  
    ExtUtils::Install   1.54  
    ExtUtils::MakeMaker 6.56  
    ExtUtils::Manifest  1.58  
    ExtUtils::ParseXS   2.2206
    File::Spec          3.31  
    Module::Build       0.3607
    Module::Signature   0.64  
    Test::Harness       3.21  
    Test::More          0.94  
    YAML                0.71  
    YAML::Syck          1.10  
    version             0.82  


--

Summary of my perl5 (revision 5 version 13 subversion 2) configuration:
   
  Platform:
    osname=linux, osvers=2.6.26-2-686, archname=i686-linux
    uname='linux debian5 2.6.26-2-686 #1 smp wed may 12 21:56:10 utc 2010 i686 gnulinux '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=undef, usemultiplicity=undef
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=undef, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
    ccversion='', gccversion='4.3.2', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
    libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.7'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'


Characteristics of this binary (from libperl): 
  Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
                        USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
  Built under linux
  Compiled at Jun 23 2010 13:37:47
  %ENV:
    PERL5LIB=""
    PERL5OPT=""
    PERL5_CPANPLUS_IS_RUNNING="25551"
    PERL5_CPAN_IS_EXECUTING="/home/stro/cpan/build/5.13.2/CORBA-omniORB-0.9-qTYHhT/Makefile.PL"
    PERL5_CPAN_IS_RUNNING="25551"
    PERL5_CPAN_IS_RUNNING_IN_RECURSION="2972,25551"
    PERL_CR_SMOKER_CURRENT="CORBA-omniORB-0.9"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_MM_USE_DEFAULT="1"
  @INC:
    /home/stro/perl/perl5132/lib/site_perl/5.13.2/i686-linux
    /home/stro/perl/perl5132/lib/site_perl/5.13.2
    /home/stro/perl/perl5132/lib/5.13.2/i686-linux
    /home/stro/perl/perl5132/lib/5.13.2
    .