Geo-GDAL v2.010301 Perl 5 v5.27.5 amd64-freebsd
- Status
- Unknown
- From
- Slaven Rezić (SREZIC)
- Dist
-
Geo-GDAL v2.010301
- Platform
- Perl 5 v5.27.5 amd64-freebsd
- Date
- 2017-11-13 23:00:29
- ID
- 71f8a50e-c8c6-11e7-947c-e34f47c913c9
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Ari Jolma,
This is a computer-generated report for Geo-GDAL-2.010301
on perl 5.27.5, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, attempting to
test your distribution gave an inconclusive result.
This could be because your distribution had an error during the make/build
stage, did not define tests, tests could not be found, because your tests were
interrupted before they finished, or because the results of the tests could not
be parsed. You may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
none provided
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/perl5.27.5p/bin/perl5.27.5 Makefile.PL':
I did not find GDAL development files. I am going to try to download
and compile GDAL for you. You can prevent this happening by a command
line argument --no-downloads or by setting the environment variable
PERL_GDAL_NO_DOWNLOADS to a true value, or by specifying a good
gdal-config with --gdal-config or the environment variable
PERL_GDAL_CONFIG. If the version of the GDAL development files is
different from what this module was built against (2.1.3) I will be
back here.
Note that this automatic download and compile is mostly meant for
automatic tests etc. It is recommended that you download and configure
GDAL by hand. This may take a very long time. I will capture the
output from the build and put it into gdal-build.log and
gdal-build.err. You can look into them while this goes on but the
output will be buffered.
Find the latest revision of GDAL version 2.1
found 2.1.3
found 2.1.4
2.1.5 not found
Attempting to fetch 'http://download.osgeo.org/gdal/2.1.4/gdal-2.1.4.tar.xz'
mkdir gdal
tar xf gdal-2.1.4.tar.xz -C gdal --strip-components=1
cd gdal
./configure
#########
gmake -j4
#######################
Error in 'gmake -j4'.
Downloading and/or compiling GDAL failed.
The error is probably explained by the error log:
/bin/sh: cannot open ./config.rpath: No such file or directory
config.status: WARNING: 'GDALmake.opt.in' seems to ignore the --datarootdir setting
cpl_string.cpp:2603:22: warning: unused variable 'dfVal' [-Wunused-variable]
const double dfVal = CPLAtof(pszValueInit);
^
1 warning generated.
In file included from xtiff.c:17:
./xtiffio.h:10:10: fatal error: 'tiffio.h' file not found
#include "tiffio.h"
^~~~~~~~~~
1 error generated.
gmake[3]: *** [GNUmakefile:42: ../../o/xtiff.lo] Error 1
gmake[2]: *** [GNUmakefile:61: lib-geotiff] Error 2
gmake[1]: *** [GNUmakefile:15: gtiff-install-obj] Error 2
gmake: *** [GNUmakefile:88: frmts-target] Error 2
gmake: *** Waiting for unfinished jobs....
In file included from ogrodbcdatasource.cpp:31:
In file included from ./ogr_odbc.h:34:
/home/cpansand/.cpan/build/2017111221/Geo-GDAL-2.010301-0/gdal/port/cpl_odbc.h:39:10: fatal error: 'sql.h' file not found
#include <sql.h>
^~~~~~~
1 error generated.
gmake[3]: *** [../../../GDALmake.opt:648: ../o/ogrodbcdatasource.lo] Error 1
gmake[2]: *** [../../GDALmake.opt:661: odbc-target] Error 2
gmake[2]: *** Waiting for unfinished jobs....
gmake[1]: *** [GNUmakefile:47: sublibs] Error 2
gmake[1]: *** Waiting for unfinished jobs....
gmake: *** [GNUmakefile:74: ogr-target] Error 2
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
configure_requires:
Module Need Have
------------------- ---- --------
Capture::Tiny 0 0.46
Config 0 5.027005
Cwd 0 3.68
ExtUtils::MakeMaker 0 7.30
File::Basename 0 2.85
File::Fetch 0 0.54
strict 0 1.11
warnings 0 1.37
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
PATH = /usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/cpansand/bin/freebsd11.0:/home/cpansand/bin/sh:/home/cpansand/bin:/usr/games:/home/cpansand/devel:/home/eserte/src/srezic-misc/scripts
PERL = /usr/perl5.27.5p/bin/perl5.27.5
PERL5LIB = /home/cpansand/.cpan/build/2017111221/File-MkTemp-1.0.6-0/blib/arch:/home/cpansand/.cpan/build/2017111221/File-MkTemp-1.0.6-0/blib/lib:/home/cpansand/.cpan/build/2017111221/DBD-Pg-3.7.0-0/blib/arch:/home/cpansand/.cpan/build/2017111221/DBD-Pg-3.7.0-0/blib/lib
PERL5OPT = -I/var/tmp/cpansmoker-1023/2017111221/CPAN-Reporter-lib-F7MC -MDevel::Autoflush
PERL5_CPANPLUS_IS_RUNNING = 89204
PERL5_CPAN_IS_EXECUTING = /home/cpansand/.cpan/build/2017111221/Geo-GDAL-2.010301-0/Makefile.PL
PERL5_CPAN_IS_RUNNING = 89204
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 89191,89204
PERLDOC = -MPod::Perldoc::ToTextOverstrike
PERL_AUTOINSTALL = --defaultdeps
PERL_BATCH = yes
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_CPAN_REPORTER_CONFIG = /var/tmp/cpansmoker-1023/2017111221/cpanreporter_000_config.ini
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/local/bin/zsh
TERM = screen
TMPDIR = /var/tmp/cpansmoker-1023/2017111221
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /usr/perl5.27.5p/bin/perl5.27.5
$UID/$EUID = 1023 / 1023
$GID = 1023 1023
$EGID = 1023 1023
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.18
CPAN::Meta 2.150010
Cwd 3.68
ExtUtils::CBuilder 0.280228
ExtUtils::Command 7.30
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.30
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.35
File::Spec 3.68
JSON 2.94
JSON::PP 2.94
Module::Build 0.4224
Module::Signature n/a
Parse::CPAN::Meta 2.150010
Test::Harness 3.39
Test::More 1.302103
YAML 1.23
YAML::Syck 1.30
version 0.9918
--
Summary of my perl5 (revision 5 version 27 subversion 5) configuration:
Platform:
osname=freebsd
osvers=11.1-release-p2
archname=amd64-freebsd
uname='freebsd ali2.bbbike.org 11.1-release-p2 freebsd 11.1-release-p2 #0 r313908+e96f1f21705(releng11.1)-dirty: thu oct 19 12:14:33 utc 2017 root@ali2.bbbike.org:usrobjhomeprojectsfreebsdsysgeneric amd64 '
config_args='-ds -e -Dprefix=/usr/perl5.27.5p -Dusedevel -Dusemallocwrap=no -Dcf_email=srezic@cpan.org -Doptimize=-O2 -pipe'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=undef
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_FORTIFY_SOURCE=2'
optimize='-O2 -pipe'
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='4.2.1 Compatible FreeBSD Clang 4.0.0 (tags/RELEASE_400/final 297347)'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags ='-pthread -Wl,-E -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib /usr/bin/../lib/clang/4.0.0/lib /usr/lib
libs=-lpthread -lgdbm -lm -lcrypt -lutil -lc
perllibs=-lpthread -lm -lcrypt -lutil -lc
libc=
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags=' '
cccdlflags='-DPIC -fPIC'
lddlflags='-shared -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_OP_PARENT
PERL_PRESERVE_IVUV
PERL_USE_DEVEL
USE_64_BIT_ALL
USE_64_BIT_INT
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
Built under freebsd
Compiled at Oct 28 2017 07:17:19
%ENV:
PERL="/usr/perl5.27.5p/bin/perl5.27.5"
PERL5LIB="/home/cpansand/.cpan/build/2017111221/File-MkTemp-1.0.6-0/blib/arch:/home/cpansand/.cpan/build/2017111221/File-MkTemp-1.0.6-0/blib/lib:/home/cpansand/.cpan/build/2017111221/DBD-Pg-3.7.0-0/blib/arch:/home/cpansand/.cpan/build/2017111221/DBD-Pg-3.7.0-0/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="89204"
PERL5_CPAN_IS_EXECUTING="/home/cpansand/.cpan/build/2017111221/Geo-GDAL-2.010301-0/Makefile.PL"
PERL5_CPAN_IS_RUNNING="89204"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="89191,89204"
PERLDOC="-MPod::Perldoc::ToTextOverstrike"
PERL_AUTOINSTALL="--defaultdeps"
PERL_BATCH="yes"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_CPAN_REPORTER_CONFIG="/var/tmp/cpansmoker-1023/2017111221/cpanreporter_000_config.ini"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/cpansand/.cpan/build/2017111221/File-MkTemp-1.0.6-0/blib/arch
/home/cpansand/.cpan/build/2017111221/File-MkTemp-1.0.6-0/blib/lib
/home/cpansand/.cpan/build/2017111221/DBD-Pg-3.7.0-0/blib/arch
/home/cpansand/.cpan/build/2017111221/DBD-Pg-3.7.0-0/blib/lib
/usr/perl5.27.5p/lib/site_perl/5.27.5/amd64-freebsd
/usr/perl5.27.5p/lib/site_perl/5.27.5
/usr/perl5.27.5p/lib/5.27.5/amd64-freebsd
/usr/perl5.27.5p/lib/5.27.5
.