Back
From: metabase:user:314402c4-2aae-11df-837a-5e0a49663a4f
Subject: PASS Git-Archive-0.10 v5.25.3 GNU/Linux
Date: 2016-08-06T20:14:48Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Dominic Humphries,
This is a computer-generated report for Git-Archive-0.10
on perl 5.25.3, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
none provided
------------------------------
PROGRAM OUTPUT
------------------------------
Output from './Build test':
Cloning into 't/local'...
warning: You appear to have cloned an empty repository.
done. at t/basic.t line 24.
To /home/cpansand/.cpan/build/2016080618/Git-Archive-0.10-0/t/remote
* [new branch] master -> master at t/basic.t line 43.
warning: push.default is unset; its implicit value has changed in
Git 2.0 from 'matching' to 'simple'. To squelch this message
and maintain the traditional behavior, use:
git config --global push.default matching
To squelch this message and adopt the new behavior now, use:
git config --global push.default simple
When push.default is set to 'matching', git will push local branches
to the remote branches that already exist with the same name.
Since Git 2.0, Git defaults to the more conservative 'simple'
behavior, which only pushes the current branch to the corresponding
remote branch that 'git pull' uses to update the current branch.
See 'git help config' and search for 'push.default' for further information.
(the 'simple' mode was introduced in Git 1.7.11. Use the similar mode
'current' instead of 'simple' if you sometimes use older versions of Git)
To /home/cpansand/.cpan/build/2016080618/Git-Archive-0.10-0/t/remote
8f75435..31156e8 master -> master at t/basic.t line 57.
warning: push.default is unset; its implicit value has changed in
Git 2.0 from 'matching' to 'simple'. To squelch this message
and maintain the traditional behavior, use:
git config --global push.default matching
To squelch this message and adopt the new behavior now, use:
git config --global push.default simple
When push.default is set to 'matching', git will push local branches
to the remote branches that already exist with the same name.
Since Git 2.0, Git defaults to the more conservative 'simple'
behavior, which only pushes the current branch to the corresponding
remote branch that 'git pull' uses to update the current branch.
See 'git help config' and search for 'push.default' for further information.
(the 'simple' mode was introduced in Git 1.7.11. Use the similar mode
'current' instead of 'simple' if you sometimes use older versions of Git)
To /home/cpansand/.cpan/build/2016080618/Git-Archive-0.10-0/t/remote
31156e8..8bd7543 master -> master at /tmpfs/.cpan-build-cpansand/2016080618/Git-Archive-0.10-0/blib/lib/Git/Archive.pm line 169.
warning: push.default is unset; its implicit value has changed in
Git 2.0 from 'matching' to 'simple'. To squelch this message
and maintain the traditional behavior, use:
git config --global push.default matching
To squelch this message and adopt the new behavior now, use:
git config --global push.default simple
When push.default is set to 'matching', git will push local branches
to the remote branches that already exist with the same name.
Since Git 2.0, Git defaults to the more conservative 'simple'
behavior, which only pushes the current branch to the corresponding
remote branch that 'git pull' uses to update the current branch.
See 'git help config' and search for 'push.default' for further information.
(the 'simple' mode was introduced in Git 1.7.11. Use the similar mode
'current' instead of 'simple' if you sometimes use older versions of Git)
To /home/cpansand/.cpan/build/2016080618/Git-Archive-0.10-0/t/remote
8bd7543..e1eeb68 master -> master at t/basic.t line 245.
t/basic.t ............... ok
t/release-pod-syntax.t .. skipped: these tests are for release candidate testing
All tests successful.
Files=2, Tests=36, 9 wallclock secs ( 0.03 usr 0.03 sys + 0.53 cusr 3.26 csys = 3.85 CPU)
Result: PASS
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
--------------- ------- --------
Git::Repository 0 1.320
IPC::Cmd 0 0.94
perl v5.10.0 5.025003
strict 0 1.11
build_requires:
Module Need Have
--------------- ------- --------
Data::Dumper 0 2.161
File::Path 0 2.12_01
Module::Build 0.3601 0.4218
Test::More 0.88 1.302045
configure_requires:
Module Need Have
--------------- ------- --------
Module::Build 0.3601 0.4218
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
LANG = C
PATH = /usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/cpansand/bin/linux-gnu:/home/cpansand/bin/sh:/home/cpansand/bin:/usr/games:/home/cpansand/devel:/home/eserte/src/srezic-misc/scripts
PERL5LIB = /home/cpansand/.cpan/build/2016080618/Test-Dependencies-0.21-0/blib/arch:/home/cpansand/.cpan/build/2016080618/Test-Dependencies-0.21-0/blib/lib:/home/cpansand/.cpan/build/2016080618/Ark-1.20-0/blib/arch:/home/cpansand/.cpan/build/2016080618/Ark-1.20-0/blib/lib:/home/cpansand/.cpan/build/2016080618/Path-AttrRouter-0.04-0/blib/arch:/home/cpansand/.cpan/build/2016080618/Path-AttrRouter-0.04-0/blib/lib:/home/cpansand/.cpan/build/2016080618/Lingua-JA-Regular-Unicode-0.12-0/blib/arch:/home/cpansand/.cpan/build/2016080618/Lingua-JA-Regular-Unicode-0.12-0/blib/lib:/home/cpansand/.cpan/build/2016080618/HTML-Shakan-2.02-0/blib/arch:/home/cpansand/.cpan/build/2016080618/HTML-Shakan-2.02-0/blib/lib:/home/cpansand/.cpan/build/2016080618/FormValidator-Lite-0.38-0/blib/arch:/home/cpansand/.cpan/build/2016080618/FormValidator-Lite-0.38-0/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 19630
PERL5_CPAN_IS_RUNNING = 19630
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 19597,19630
PERLDOC = -MPod::Perldoc::ToTextOverstrike
PERL_BATCH = yes
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_CPAN_REPORTER_CONFIG = /run/user/1023/cpansmoker/2016080618/cpanreporter_006_config.ini
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_USE_UNSAFE_INC = 1
SHELL = /bin/zsh
TERM = screen
TMPDIR = /run/user/1023/cpansmoker/2016080618
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /bbbike/perl-5.25.3/bin/perl5.25.3
$UID/$EUID = 1023 / 1023
$GID = 1023 1023
$EGID = 1023 1023
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.14
CPAN::Meta 2.150005
Cwd 3.64
ExtUtils::CBuilder 0.280225
ExtUtils::Command 7.18
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.18
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.33
File::Spec 3.64
JSON 2.90
JSON::PP 2.27400
Module::Build 0.4218
Module::Signature 0.80
Parse::CPAN::Meta 1.4422
Test::Harness 3.36
Test::More 1.302045
YAML 1.18
YAML::Syck 1.29
version 0.9917
--
Summary of my perl5 (revision 5 version 25 subversion 3) configuration:
Platform:
osname=linux
osvers=3.16.0-4-amd64
archname=x86_64-linux
uname='linux eserte 3.16.0-4-amd64 #1 smp debian 3.16.7-ckt25-2 (2016-04-08) x86_64 gnulinux '
config_args='-ds -e -Dprefix=/opt/perl-5.25.3 -Dusedevel -Dusemallocwrap=no -Dcf_email=srezic@cpan.org'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=undef
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2'
optimize='-O2'
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='4.9.2'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/4.9/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.19.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.19'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_OP_PARENT
PERL_PRESERVE_IVUV
PERL_USE_DEVEL
USE_64_BIT_ALL
USE_64_BIT_INT
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
Built under linux
Compiled at Jul 21 2016 05:51:55
%ENV:
PERL5LIB="/home/cpansand/.cpan/build/2016080618/Test-Dependencies-0.21-0/blib/arch:/home/cpansand/.cpan/build/2016080618/Test-Dependencies-0.21-0/blib/lib:/home/cpansand/.cpan/build/2016080618/Ark-1.20-0/blib/arch:/home/cpansand/.cpan/build/2016080618/Ark-1.20-0/blib/lib:/home/cpansand/.cpan/build/2016080618/Path-AttrRouter-0.04-0/blib/arch:/home/cpansand/.cpan/build/2016080618/Path-AttrRouter-0.04-0/blib/lib:/home/cpansand/.cpan/build/2016080618/Lingua-JA-Regular-Unicode-0.12-0/blib/arch:/home/cpansand/.cpan/build/2016080618/Lingua-JA-Regular-Unicode-0.12-0/blib/lib:/home/cpansand/.cpan/build/2016080618/HTML-Shakan-2.02-0/blib/arch:/home/cpansand/.cpan/build/2016080618/HTML-Shakan-2.02-0/blib/lib:/home/cpansand/.cpan/build/2016080618/FormValidator-Lite-0.38-0/blib/arch:/home/cpansand/.cpan/build/2016080618/FormValidator-Lite-0.38-0/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="19630"
PERL5_CPAN_IS_RUNNING="19630"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="19597,19630"
PERLDOC="-MPod::Perldoc::ToTextOverstrike"
PERL_BATCH="yes"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_CPAN_REPORTER_CONFIG="/run/user/1023/cpansmoker/2016080618/cpanreporter_006_config.ini"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/cpansand/.cpan/build/2016080618/Test-Dependencies-0.21-0/blib/arch
/home/cpansand/.cpan/build/2016080618/Test-Dependencies-0.21-0/blib/lib
/home/cpansand/.cpan/build/2016080618/Ark-1.20-0/blib/arch
/home/cpansand/.cpan/build/2016080618/Ark-1.20-0/blib/lib
/home/cpansand/.cpan/build/2016080618/Path-AttrRouter-0.04-0/blib/arch
/home/cpansand/.cpan/build/2016080618/Path-AttrRouter-0.04-0/blib/lib
/home/cpansand/.cpan/build/2016080618/Lingua-JA-Regular-Unicode-0.12-0/blib/arch
/home/cpansand/.cpan/build/2016080618/Lingua-JA-Regular-Unicode-0.12-0/blib/lib
/home/cpansand/.cpan/build/2016080618/HTML-Shakan-2.02-0/blib/arch
/home/cpansand/.cpan/build/2016080618/HTML-Shakan-2.02-0/blib/lib
/home/cpansand/.cpan/build/2016080618/FormValidator-Lite-0.38-0/blib/arch
/home/cpansand/.cpan/build/2016080618/FormValidator-Lite-0.38-0/blib/lib
/opt/perl-5.25.3/lib/site_perl/5.25.3/x86_64-linux
/opt/perl-5.25.3/lib/site_perl/5.25.3
/opt/perl-5.25.3/lib/5.25.3/x86_64-linux
/opt/perl-5.25.3/lib/5.25.3
.