s-bsdipa-p5xs v0.5.0 Perl 5 v5.24.0 i686-linux-quadmath
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
s-bsdipa-p5xs v0.5.0
- Platform
- Perl 5 v5.24.0 i686-linux-quadmath
- Date
- 2025-01-04 22:08:20
- ID
- 6882c8f2-cae8-11ef-98b0-b3c3213a625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear SDAODEN,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
"/home/cpan/pit/bare-qm/perl-5.24.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- BsDiPa.bs blib/arch/auto/BsDiPa/BsDiPa.bs 644
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare-qm/perl-5.24.0/bin/perl" "-Iblib/lib" "-Iblib/arch" test.pl
DESCRIPTION OF DIAGNOSTICS
These messages are classified as follows (listed in increasing order of
desperation):
(W) A warning (optional).
(D) A deprecation (enabled by default).
(S) A severe warning (enabled by default).
(F) A fatal error (trappable).
(P) An internal error you should never see (trappable).
(X) A very fatal error (nontrappable).
(A) An alien error message (not generated by Perl).
The majority of messages from the first three classifications above
(W, D & S) can be controlled using the warnings pragma.
If a message can be controlled by the warnings pragma, its warning
category is included with the classification letter in the description
below. E.g. (W closed) means a warning in the closed category.
Severe warnings are always enabled, unless they are explicitly disabled
with the warnings pragma or the -X switch.
Trappable errors may be trapped using the eval operator. See
"eval" in perlfunc. In almost all cases, warnings may be selectively
disabled or promoted to fatal errors using the warnings pragma.
See warnings.
Can't load 'blib/arch/auto/BsDiPa/BsDiPa.so' for module BsDiPa: blib/arch/auto/BsDiPa/BsDiPa.so: undefined symbol: SvPVCLEAR at /home/cpan/pit/bare-qm/perl-5.24.0/lib/5.24.0/i686-linux-quadmath/DynaLoader.pm line 193.
at test.pl line 19.
Compilation failed in require at test.pl line 19.
BEGIN failed--compilation aborted at test.pl line 19 (#1)
(F) The module you tried to load failed to load a dynamic extension.
This may either mean that you upgraded your version of perl to one
that is incompatible with your old dynamic extensions (which is known
to happen between major versions of perl), or (more likely) that your
dynamic extension was built against an older version of the library
that is installed on your system. You may need to rebuild your old
dynamic extensions.
Uncaught exception from user code:
Can't load 'blib/arch/auto/BsDiPa/BsDiPa.so' for module BsDiPa: blib/arch/auto/BsDiPa/BsDiPa.so: undefined symbol: SvPVCLEAR at /home/cpan/pit/bare-qm/perl-5.24.0/lib/5.24.0/i686-linux-quadmath/DynaLoader.pm line 193.
at test.pl line 19.
Compilation failed in require at test.pl line 19.
BEGIN failed--compilation aborted at test.pl line 19.
make: *** [Makefile:1015: test_dynamic] Error 2
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.70 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.70
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.70
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.51
File::Spec 3.75
Module::Build 0.4234
Pod::Parser 1.63
Pod::Simple 3.32
Test2 1.302199
Test::Harness 3.48
Test::More 1.302199
version 0.9932
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/jail/_BmDOof3SD/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = /home/cpan/pit/jail/_BmDOof3SD/lib/perl5:/home/cpan/pit/bare-qm/conf/perl-5.24.0/.cpanplus/5.24.0/build/tBtRO_pRKc/s-bsdipa-p5xs-0.5.0/blib/lib:/home/cpan/pit/bare-qm/conf/perl-5.24.0/.cpanplus/5.24.0/build/tBtRO_pRKc/s-bsdipa-p5xs-0.5.0/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 25440
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare-qm/conf/perl-5.24.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/_BmDOof3SD
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/_BmDOof3SD"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/_BmDOof3SD
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare-qm/perl-5.24.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 24 subversion 0) configuration:
Platform:
osname=linux, osvers=5.10.0-12-686, archname=i686-linux-quadmath
uname='linux dagobah 5.10.0-12-686 #1 smp debian 5.10.103-1 (2022-03-07) i686 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare-qm/perl-5.24.0 -Dusequadmath'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2',
optimize='-O2',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion='', gccversion='10.2.1 20210110', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12, longdblkind=3
ivtype='long', ivsize=4, nvtype='__float128', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/include/i386-linux-gnu /usr/lib /lib/i386-linux-gnu /lib/../lib /usr/lib/i386-linux-gnu /usr/lib/../lib /lib /lib64 /usr/lib64
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc -lquadmath
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc -lquadmath
libc=libc-2.31.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.31'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LOCALE_TIME USE_PERLIO
USE_PERL_ATOF USE_QUADMATH
Locally applied patches:
Devel::PatchPerl 2.08
Built under linux
Compiled at Mar 20 2022 13:19:25
%ENV:
PERL5LIB="/home/cpan/pit/jail/_BmDOof3SD/lib/perl5:/home/cpan/pit/bare-qm/conf/perl-5.24.0/.cpanplus/5.24.0/build/tBtRO_pRKc/s-bsdipa-p5xs-0.5.0/blib/lib:/home/cpan/pit/bare-qm/conf/perl-5.24.0/.cpanplus/5.24.0/build/tBtRO_pRKc/s-bsdipa-p5xs-0.5.0/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="25440"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare-qm/conf/perl-5.24.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/_BmDOof3SD"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/_BmDOof3SD""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/_BmDOof3SD"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/_BmDOof3SD/lib/perl5/5.24.0/i686-linux-quadmath
/home/cpan/pit/jail/_BmDOof3SD/lib/perl5/5.24.0
/home/cpan/pit/jail/_BmDOof3SD/lib/perl5/i686-linux-quadmath
/home/cpan/pit/jail/_BmDOof3SD/lib/perl5
/home/cpan/pit/bare-qm/conf/perl-5.24.0/.cpanplus/5.24.0/build/tBtRO_pRKc/s-bsdipa-p5xs-0.5.0/blib/lib
/home/cpan/pit/bare-qm/conf/perl-5.24.0/.cpanplus/5.24.0/build/tBtRO_pRKc/s-bsdipa-p5xs-0.5.0/blib/arch
/home/cpan/pit/bare-qm/perl-5.24.0/lib/site_perl/5.24.0/i686-linux-quadmath
/home/cpan/pit/bare-qm/perl-5.24.0/lib/site_perl/5.24.0
/home/cpan/pit/bare-qm/perl-5.24.0/lib/5.24.0/i686-linux-quadmath
/home/cpan/pit/bare-qm/perl-5.24.0/lib/5.24.0
.