Math-Matrix v0.9 Perl 5 v5.14.2 x86_64-linux
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Math-Matrix v0.9
- Platform
- Perl 5 v5.14.2 x86_64-linux
- Date
- 2020-08-11 07:15:16
- ID
- 67fb84d0-dba2-11ea-b3a5-abe2e1c4f0ab
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear PJACKLAM,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9908. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare/perl-5.14.2/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-signature.t .............. skipped: Set the environment variable TEST_SIGNATURE to enable this test.
t/01-load.t ................... ok
t/absolute.t .................. ok
t/as_string.t ................. ok
t/basic.t ..................... ok
# Failed test 'trying to modify $y->[0][0] does actually modify it'
# at t/clone-math-complex.t line 36.
# got: 2
# expected: 3
# Failed test 'modifying $y->[0][0] does not modify $x->[0][0]'
# at t/clone-math-complex.t line 38.
# got: 2
# expected: 3
# Failed test 'trying to modify $y->[0][1] does actually modify it'
# at t/clone-math-complex.t line 36.
# got: 3
# expected: 4
# Failed test 'modifying $y->[0][1] does not modify $x->[0][1]'
# at t/clone-math-complex.t line 38.
# got: 3
# expected: 4
# Failed test 'trying to modify $y->[0][2] does actually modify it'
# at t/clone-math-complex.t line 36.
# got: 4
# expected: 5
# Failed test 'modifying $y->[0][2] does not modify $x->[0][2]'
# at t/clone-math-complex.t line 38.
# got: 4
# expected: 5
# Failed test 'trying to modify $y->[1][0] does actually modify it'
# at t/clone-math-complex.t line 36.
# got: 5
# expected: 6
# Failed test 'modifying $y->[1][0] does not modify $x->[1][0]'
# at t/clone-math-complex.t line 38.
# got: 5
# expected: 6
# Failed test 'trying to modify $y->[1][1] does actually modify it'
# at t/clone-math-complex.t line 36.
# got: 6
# expected: 7
# Failed test 'modifying $y->[1][1] does not modify $x->[1][1]'
# at t/clone-math-complex.t line 38.
# got: 6
# expected: 7
# Failed test 'trying to modify $y->[1][2] does actually modify it'
# at t/clone-math-complex.t line 36.
# got: 7
# expected: 8
# Failed test 'modifying $y->[1][2] does not modify $x->[1][2]'
# at t/clone-math-complex.t line 38.
# got: 7
# expected: 8
# Looks like you failed 12 tests of 22.
t/clone-math-complex.t ........
Dubious, test returned 12 (wstat 3072, 0xc00)
Failed 12/22 subtests
t/clone-math-real.t ........... ok
t/clone.t ..................... ok
t/concat.t .................... ok
t/cross_product.t ............. ok
t/determinant-math-complex.t .. ok
t/determinant-math-real.t ..... ok
t/determinant.t ............... ok
t/diagonal.t .................. ok
t/dot_product.t ............... ok
t/extension.t ................. ok
t/negative.t .................. ok
t/new.t ....................... ok
t/new_identity.t .............. ok
t/normalize.t ................. ok
# Failed test 'modifying $B->[0][0] does not modify $A->[0][1]'
# at t/slice-math-complex.t line 39.
# got: 13
# expected: 12
# Failed test 'modifying $B->[0][1] does not modify $A->[0][3]'
# at t/slice-math-complex.t line 39.
# got: 15
# expected: 14
# Failed test 'modifying $B->[0][2] does not modify $A->[0][6]'
# at t/slice-math-complex.t line 39.
# got: 18
# expected: 17
# Failed test 'modifying $B->[1][0] does not modify $A->[1][1]'
# at t/slice-math-complex.t line 39.
# got: 23
# expected: 22
# Failed test 'modifying $B->[1][1] does not modify $A->[1][3]'
# at t/slice-math-complex.t line 39.
# got: 25
# expected: 24
# Failed test 'modifying $B->[1][2] does not modify $A->[1][6]'
# at t/slice-math-complex.t line 39.
# got: 28
# expected: 27
# Looks like you failed 6 tests of 19.
t/slice-math-complex.t ........
Dubious, test returned 6 (wstat 1536, 0x600)
Failed 6/19 subtests
t/slice-math-real.t ........... ok
t/slice.t ..................... ok
t/version.t ................... ok
Test Summary Report
-------------------
t/clone-math-complex.t (Wstat: 3072 Tests: 22 Failed: 12)
Failed tests: 6-7, 9-10, 12-13, 15-16, 18-19, 21-22
Non-zero exit status: 12
t/slice-math-complex.t (Wstat: 1536 Tests: 19 Failed: 6)
Failed tests: 4, 7, 10, 13, 16, 19
Non-zero exit status: 6
Files=24, Tests=231, 1 wallclock secs ( 0.06 usr 0.01 sys + 0.77 cusr 0.12 csys = 0.96 CPU)
Result: FAIL
Failed 2/24 test programs. 18/231 subtests failed.
make: *** [Makefile:861: test_dynamic] Error 255
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Math::Complex 1.56 0
Test::More 1.302175 0.94
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9908
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280234
ExtUtils::Command 7.46
ExtUtils::Install 2.16
ExtUtils::MakeMaker 7.46
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.37
Pod::Simple 3.16
Test2 1.302175
Test::Harness 3.42
Test::More 1.302175
version 0.9924
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C.UTF-8
LC_COLLATE = C
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/jail/zzTJEHGK6w/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PERL5LIB = /home/cpan/pit/jail/zzTJEHGK6w/lib/perl5:/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/TkAc5ia0Ua/Math-Matrix-0.9/blib/lib:/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/TkAc5ia0Ua/Math-Matrix-0.9/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 15989
PERL5_CPANPLUS_IS_VERSION = 0.9908
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.14.2
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/zzTJEHGK6w
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/zzTJEHGK6w"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/zzTJEHGK6w
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.14.2/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 14 subversion 2) configuration:
Platform:
osname=linux, osvers=5.4.12-1-lts, archname=x86_64-linux
uname='linux august 5.4.12-1-lts #2-alpine smp thu, 16 jan 2020 12:53:54 utc x86_64 linux '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.14.2'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector'
ccversion='', gccversion='9.2.0', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/../lib /usr/lib/../lib /lib /usr/lib
libs=-lgdbm -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-ldl -lm -lcrypt -lutil -lc
libc=/usr/lib/libc.a, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 1.82
Built under linux
Compiled at Jan 28 2020 20:36:47
%ENV:
PERL5LIB="/home/cpan/pit/jail/zzTJEHGK6w/lib/perl5:/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/TkAc5ia0Ua/Math-Matrix-0.9/blib/lib:/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/TkAc5ia0Ua/Math-Matrix-0.9/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="15989"
PERL5_CPANPLUS_IS_VERSION="0.9908"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.14.2"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/zzTJEHGK6w"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/zzTJEHGK6w""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/zzTJEHGK6w"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/zzTJEHGK6w/lib/perl5/5.14.2/x86_64-linux
/home/cpan/pit/jail/zzTJEHGK6w/lib/perl5/5.14.2
/home/cpan/pit/jail/zzTJEHGK6w/lib/perl5/x86_64-linux
/home/cpan/pit/jail/zzTJEHGK6w/lib/perl5
/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/TkAc5ia0Ua/Math-Matrix-0.9/blib/lib
/home/cpan/pit/bare/conf/perl-5.14.2/.cpanplus/5.14.2/build/TkAc5ia0Ua/Math-Matrix-0.9/blib/arch
/home/cpan/pit/bare/perl-5.14.2/lib/site_perl/5.14.2/x86_64-linux
/home/cpan/pit/bare/perl-5.14.2/lib/site_perl/5.14.2
/home/cpan/pit/bare/perl-5.14.2/lib/5.14.2/x86_64-linux
/home/cpan/pit/bare/perl-5.14.2/lib/5.14.2
.