Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL PerlIO-via-Skip-0.06 v5.12.1 OpenBSD
Date: 2011-09-15T13:48:20Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear IOANNIS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9109. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Thu Sep 15 14:48:17 2011] Using cached file '/home/cpan/pit/bare/conf/perl-5.12.1/.cpanplus/authors/id/I/IO/IOANNIS/CHECKSUMS' on disk; ttl (3600s) is not exceeded
[MSG] [Thu Sep 15 14:48:17 2011] Checksum matches for 'PerlIO-via-Skip-0.06.tar.gz'
[MSG] [Thu Sep 15 14:48:18 2011] Extracted 'PerlIO::via::Skip' to '/home/cpan/pit/bare/conf/perl-5.12.1/.cpanplus/5.12.1/build/PerlIO-via-Skip-0.06'
[MSG] [Thu Sep 15 14:48:18 2011] CPANPLUS is prefering Build.PL
[MSG] [Thu Sep 15 14:48:18 2011] Loading YACSmoke database "/home/cpan/pit/bare/conf/perl-5.12.1/.cpanplus/cpansmoke.dat"
[MSG] [Thu Sep 15 14:48:18 2011] Checking prerequisites...
recommends:
* Test::CPAN::Meta is not installed
* Test::Dependencies is not installed
* Test::Distribution is not installed
* Test::Exception is not installed
* Test::HasVersion is not installed
* Test::MinimumVersion is not installed
* Test::Pod is not installed
* Test::Pod::Coverage is not installed
* Test::Spelling is not installed
* Test::Strict is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'PerlIO-via-Skip' version '0.06'
[MSG] [Thu Sep 15 14:48:18 2011] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Sep 15 14:48:18 2011] Checking for previous PASS result for "PerlIO-via-Skip-0.06"
[MSG] [Thu Sep 15 14:48:19 2011] Building PerlIO-via-Skip
[ERROR] [Thu Sep 15 14:48:20 2011] MAKE TEST failed:
t/00_load.t ............ ok
# Tests were run but no plan was declared and done_testing() was not seen.
t/01b_pod.t ............
All 1 subtests passed
(less 1 skipped subtest: 0 okay)
# Tests were run but no plan was declared and done_testing() was not seen.
t/01c_coverage.t .......
All 1 subtests passed
(less 1 skipped subtest: 0 okay)
t/01s_spelling.t ....... ok
t/02_hasversion.t ...... ok
t/03_meta.t ............ ok
t/05_minimumversion.t .. ok
t/07_strict.t .......... ok
t/binmode.t ............ ok
t/config.t ............. ok
t/dot.t ................ ok
t/main.t ............... ok
t/mode.t ............... ok
t/r01_general.t ........ ok
t/r02_eol.t ............ ok
t/r03_after.t .......... ok
t/r04_maxlines.t ....... ok
t/r05_patterns.t ....... ok
t/r06_blanklines.t ..... ok
t/r07_comments.t ....... ok
t/rr01_general.t ....... ok
t/rw01_general.t ....... ok
t/w01_general.t ........ ok
t/w02a_eol.t ........... ok
t/w02b_eol.t ........... ok
t/w03_after.t .......... ok
t/w04_maxlines.t ....... ok
t/w05_patterns.t ....... ok
t/w06_blanklines.t ..... ok
t/w07_comments.t ....... ok
Test Summary Report
-------------------
t/01b_pod.t (Wstat: 0 Tests: 1 Failed: 0)
Parse errors: No plan found in TAP output
t/01c_coverage.t (Wstat: 0 Tests: 1 Failed: 0)
Parse errors: No plan found in TAP output
Files=30, Tests=131, 1 wallclock secs ( 0.07 usr 0.08 sys + 0.68 cusr 0.19 csys = 1.02 CPU)
Result: FAIL
Failed 2/30 test programs. 0/131 subtests failed.
BEGIN failed--compilation aborted at /home/cpan/pit/bare/perl-5.12.1/bin/cpanp-run-perl line 8.
[MSG] [Thu Sep 15 14:48:20 2011] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9109
CPANPLUS::Dist::Build 0.56
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.58
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2206
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.93
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.64.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.12.1/.cpanplus/5.12.1/build/PerlIO-via-Skip-0.06/blib/lib:/home/cpan/pit/bare/conf/perl-5.12.1/.cpanplus/5.12.1/build/PerlIO-via-Skip-0.06/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 28996
PERL5_CPANPLUS_IS_VERSION = 0.9109
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.12.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.12.1/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 1) configuration:
Platform:
osname=openbsd, osvers=4.9, archname=OpenBSD.amd64-openbsd
uname='openbsd ostrich.bingosnet.co.uk 4.9 generic#477 amd64 '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.12.1'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 ', gccosandvers='openbsd4.9'
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.58.0, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MYMALLOC PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES
USE_PERLIO USE_PERL_ATOF
Built under openbsd
Compiled at May 4 2011 16:21:32
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.12.1/.cpanplus/5.12.1/build/PerlIO-via-Skip-0.06/blib/lib:/home/cpan/pit/bare/conf/perl-5.12.1/.cpanplus/5.12.1/build/PerlIO-via-Skip-0.06/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="28996"
PERL5_CPANPLUS_IS_VERSION="0.9109"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.12.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.12.1/.cpanplus/5.12.1/build/PerlIO-via-Skip-0.06/blib/lib
/home/cpan/pit/bare/conf/perl-5.12.1/.cpanplus/5.12.1/build/PerlIO-via-Skip-0.06/blib/arch
/home/cpan/pit/bare/perl-5.12.1/lib/site_perl/5.12.1/OpenBSD.amd64-openbsd
/home/cpan/pit/bare/perl-5.12.1/lib/site_perl/5.12.1
/home/cpan/pit/bare/perl-5.12.1/lib/5.12.1/OpenBSD.amd64-openbsd
/home/cpan/pit/bare/perl-5.12.1/lib/5.12.1
.