Alien-OpenSSL v0.15 Perl 5 v5.24.3 amd64-freebsd
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Alien-OpenSSL v0.15
- Platform
- Perl 5 v5.24.3 amd64-freebsd
- Date
- 2023-02-09 12:50:46
- ID
- 5f4f8e12-a878-11ed-aba6-9a79f339625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Graham Ollis,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
cp lib/Alien/OpenSSL.pm blib/lib/Alien/OpenSSL.pm
"/usr/home/cpan/pit/bare/perl-5.24.3/bin/perl" -MAlien::Build::MM=cmd -e prefix site /usr/home/cpan/pit/jail/W3Njj0G_CO/lib/perl5/amd64-freebsd /usr/home/cpan/pit/jail/W3Njj0G_CO/lib/perl5/amd64-freebsd /usr/home/cpan/pit/jail/W3Njj0G_CO/lib/perl5/amd64-freebsd
Alien::Build::Plugin::PkgConfig::Negotiate> Using PkgConfig plugin: PkgConfig::CommandLine
main> prefix /usr/home/cpan/pit/jail/W3Njj0G_CO/lib/perl5/amd64-freebsd/auto/share/dist/Alien-OpenSSL
"/usr/home/cpan/pit/bare/perl-5.24.3/bin/perl" -MAlien::Build::MM=cmd -e version 0.15
Alien::Build::Plugin::PkgConfig::Negotiate> Using PkgConfig plugin: PkgConfig::CommandLine
"/usr/home/cpan/pit/bare/perl-5.24.3/bin/perl" -MAlien::Build::MM=cmd -e download
Alien::Build::Plugin::PkgConfig::Negotiate> Using PkgConfig plugin: PkgConfig::CommandLine
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-filename :%{filename_effective}\n
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-content_type :%{content_type}\n
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-url :%{url_effective}\n
Alien::Build::Plugin::Fetch::CurlCommand> + /usr/local/bin/curl -L -f -O -J -w @writeout https://www.openssl.org/source/
Alien::Build::Plugin::Fetch::CurlCommand> % Total % Received % Xferd Average Speed Time Time Time Current
Alien::Build::Plugin::Fetch::CurlCommand> Dload Upload Total Spent Left Speed
Alien::Build::Plugin::Fetch::CurlCommand>
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Remote filename has no length!
Alien::Build::Plugin::Fetch::CurlCommand>
100 9308 100 9308 0 0 14151 0 --:--:-- --:--:-- --:--:-- 14916
Alien::Build::Plugin::Fetch::CurlCommand> curl: (23) Failure writing output to destination
Alien::Build::Plugin::Fetch::CurlCommand> + /usr/local/bin/curl -L -f -o index.html -w @writeout https://www.openssl.org/source/
Alien::Build::Plugin::Core::Download> decoding html
Alien::Build::Plugin::Core::Download> candidate *https://www.openssl.org/source/openssl-3.0.8.tar.gz
Alien::Build::Plugin::Core::Download> candidate https://www.openssl.org/source/openssl-1.1.1t.tar.gz
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-filename :%{filename_effective}\n
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-content_type :%{content_type}\n
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-url :%{url_effective}\n
Alien::Build::Plugin::Fetch::CurlCommand> + /usr/local/bin/curl -L -f -O -J -w @writeout https://www.openssl.org/source/openssl-3.0.8.tar.gz
Alien::Build::Plugin::Core::Download> setting version based on archive to 3.0.8
Alien::Build::Plugin::Core::Download> downloaded openssl-3.0.8.tar.gz
"/usr/home/cpan/pit/bare/perl-5.24.3/bin/perl" -MAlien::Build::MM=cmd -e build
Alien::Build::Plugin::PkgConfig::Negotiate> Using PkgConfig plugin: PkgConfig::CommandLine
Alien::Build::CommandSequence> + ./config --prefix=/usr/home/cpan/pit/jail/W3Njj0G_CO/lib/perl5/amd64-freebsd/auto/share/dist/Alien-OpenSSL --libdir=/usr/home/cpan/pit/jail/W3Njj0G_CO/lib/perl5/amd64-freebsd/auto/share/dist/Alien-OpenSSL/lib shared
Configuring OpenSSL version 3.0.8 for target BSD-x86_64
Using os-specific seed configuration
Created configdata.pm
Running configdata.pm
Created Makefile.in
Created Makefile
Created include/openssl/configuration.h
**********************************************************************
*** ***
*** OpenSSL has been successfully configured ***
*** ***
*** If you encounter a problem while building, please open an ***
*** issue on GitHub <https://github.com/openssl/openssl/issues> ***
*** and include the output from the following command: ***
*** ***
*** perl configdata.pm --dump ***
*** ***
*** (If you are new to OpenSSL, you might want to consult the ***
*** 'Troubleshooting' section in the INSTALL.md file first) ***
*** ***
**********************************************************************
Alien::Build::CommandSequence> + make
Detected changed: ./Configure ./config ./build.info crypto/build.info ssl/build.info apps/build.info util/build.info tools/build.info fuzz/build.info providers/build.info doc/build.info test/build.info engines/build.info crypto/objects/build.info crypto/buffer/build.info crypto/bio/build.info crypto/stack/build.info crypto/lhash/build.info crypto/rand/build.info crypto/evp/build.info crypto/asn1/build.info crypto/pem/build.info crypto/x509/build.info crypto/conf/build.info crypto/txt_db/build.info crypto/pkcs7/build.info crypto/pkcs12/build.info crypto/ui/build.info crypto/kdf/build.info crypto/store/build.info crypto/property/build.info crypto/md4/build.info crypto/md5/build.info crypto/sha/build.info crypto/mdc2/build.info crypto/hmac/build.info crypto/ripemd/build.info crypto/whrlpool/build.info crypto/poly1305/build.info crypto/siphash/build.info crypto/sm3/build.info crypto/des/build.info crypto/aes/build.info crypto/rc2/build.info crypto/rc4/build.info crypto/idea/build.info crypto/aria/build.info crypto/bf/build.info crypto/cast/build.info crypto/camellia/build.info crypto/seed/build.info crypto/sm4/build.info crypto/chacha/build.info crypto/modes/build.info crypto/bn/build.info crypto/ec/build.info crypto/rsa/build.info crypto/dsa/build.info crypto/dh/build.info crypto/sm2/build.info crypto/dso/build.info crypto/engine/build.info crypto/err/build.info crypto/comp/build.info crypto/http/build.info crypto/ocsp/build.info crypto/cms/build.info crypto/ts/build.info crypto/srp/build.info crypto/cmac/build.info crypto/ct/build.info crypto/async/build.info crypto/ess/build.info crypto/crmf/build.info crypto/cmp/build.info crypto/encode_decode/build.info crypto/ffc/build.info apps/lib/build.info providers/common/build.info providers/implementations/build.info doc/man1/build.info providers/common/der/build.info providers/implementations/digests/build.info providers/implementations/ciphers/build.info providers/implementations/rands/build.info providers/implementations/macs/build.info providers/implementations/kdfs/build.info providers/implementations/exchange/build.info providers/implementations/keymgmt/build.info providers/implementations/signature/build.info providers/implementations/asymciphers/build.info providers/implementations/encode_decode/build.info providers/implementations/storemgmt/build.info providers/implementations/kem/build.info providers/implementations/rands/seeding/build.info Configurations/00-base-templates.conf Configurations/10-main.conf
/usr/home/cpan/pit/bare/perl-5.24.3/bin/perl configdata.pm -r
Configuring OpenSSL version 3.0.8 for target BSD-x86_64
Using os-specific seed configuration
Created configdata.pm
Running configdata.pm
Created Makefile.in
Created Makefile
Created include/openssl/configuration.h
**********************************************************************
*** ***
*** OpenSSL has been successfully configured ***
*** ***
*** If you encounter a problem while building, please open an ***
*** issue on GitHub <https://github.com/openssl/openssl/issues> ***
*** and include the output from the following command: ***
*** ***
*** perl configdata.pm --dump ***
*** ***
*** (If you are new to OpenSSL, you might want to consult the ***
*** 'Troubleshooting' section in the INSTALL.md file first) ***
*** ***
**********************************************************************
**************************************************
*** ***
*** Please run the same make command again ***
*** ***
**************************************************
*** Error code 1
Stop.
make[1]: stopped in /usr/home/cpan/pit/bare/conf/perl-5.24.3/.cpanplus/5.24.3/build/_3HJNXqL3f/Alien-OpenSSL-0.15/_alien/build_VtkZ/openssl-3.0.8
external command failed at /usr/home/cpan/pit/jail/W3Njj0G_CO/lib/perl5/Alien/Build/CommandSequence.pm line 88.
*** Error code 2
Stop.
make: stopped in /usr/home/cpan/pit/bare/conf/perl-5.24.3/.cpanplus/5.24.3/build/_3HJNXqL3f/Alien-OpenSSL-0.15
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Alien::Base 2.77 0.038
Alien::Build 2.77 0.25
Alien::Build::MM 2.77 0.32
Alien::Build::Plugin::Gather::IsolateDynamic 2.77 0.48
Archive::Tar 2.40 0
ExtUtils::MakeMaker 7.64 6.52
HTML::LinkExtor 3.81 0
IO::Zlib 1.11 0
Sort::Versions 1.62 0
Test2::V0 0.000145 0.000121
Test::Alien 2.77 0
Test::Alien::Diag 2.77 0
Test::More 1.302191 0.96
Text::Template 1.61 0
URI 5.17 0
URI::Escape 5.17 0
base 2.23_01 0
strict 1.11 0
warnings 1.36 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.64
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.64
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.44
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.63
Pod::Simple 3.32
Test2 1.302191
Test::Harness 3.44
Test::More 1.302191
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = /usr/home/cpan/pit/jail/W3Njj0G_CO/lib/perl5
PERL5_CPANPLUS_IS_RUNNING = 45843
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.24.3
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /usr/home/cpan/pit/jail/W3Njj0G_CO
PERL_MB_OPT = --install_base "/usr/home/cpan/pit/jail/W3Njj0G_CO"
PERL_MM_OPT = INSTALL_BASE=/usr/home/cpan/pit/jail/W3Njj0G_CO
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.24.3/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 24 subversion 3) configuration:
Platform:
osname=freebsd, osvers=12.3-release, archname=amd64-freebsd
uname='freebsd fforc 12.3-release freebsd 12.3-release r371126 generic amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.24.3'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include',
optimize='-O2',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion='', gccversion='FreeBSD Clang 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16, longdblkind=3
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib /usr/lib/clang/10.0.1/lib /usr/lib
libs=-lpthread -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_LOCALE_TIME
USE_PERLIO USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 2.08
Built under freebsd
Compiled at Dec 8 2021 15:37:51
%ENV:
PERL5LIB="/usr/home/cpan/pit/jail/W3Njj0G_CO/lib/perl5"
PERL5_CPANPLUS_IS_RUNNING="45843"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.24.3"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/usr/home/cpan/pit/jail/W3Njj0G_CO"
PERL_MB_OPT="--install_base "/usr/home/cpan/pit/jail/W3Njj0G_CO""
PERL_MM_OPT="INSTALL_BASE=/usr/home/cpan/pit/jail/W3Njj0G_CO"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/usr/home/cpan/pit/jail/W3Njj0G_CO/lib/perl5/5.24.3/amd64-freebsd
/usr/home/cpan/pit/jail/W3Njj0G_CO/lib/perl5/5.24.3
/usr/home/cpan/pit/jail/W3Njj0G_CO/lib/perl5/amd64-freebsd
/usr/home/cpan/pit/jail/W3Njj0G_CO/lib/perl5
/usr/home/cpan/pit/bare/perl-5.24.3/lib/site_perl/5.24.3/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.24.3/lib/site_perl/5.24.3
/usr/home/cpan/pit/bare/perl-5.24.3/lib/5.24.3/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.24.3/lib/5.24.3
.