Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: PASS Git-Archive-0.06 v5.18.0 FreeBSD
Date: 2013-12-27T22:50:51Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear ONEONETWO,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9144. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
Cloning into 't/local'...
warning: You appear to have cloned an empty repository.
done. at t/basic.t line 23.
To /usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Archive-0.06/t/remote
* [new branch] master -> master at t/basic.t line 34.
warning: push.default is unset; its implicit value is changing in
Git 2.0 from 'matching' to 'simple'. To squelch this message
and maintain the current behavior after the default changes, use:
git config --global push.default matching
To squelch this message and adopt the new behavior now, use:
git config --global push.default simple
See 'git help config' and search for 'push.default' for further information.
(the 'simple' mode was introduced in Git 1.7.11. Use the similar mode
'current' instead of 'simple' if you sometimes use older versions of Git)
To /usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Archive-0.06/t/remote
afabe98..c982f4a master -> master at t/basic.t line 48.
warning: push.default is unset; its implicit value is changing in
Git 2.0 from 'matching' to 'simple'. To squelch this message
and maintain the current behavior after the default changes, use:
git config --global push.default matching
To squelch this message and adopt the new behavior now, use:
git config --global push.default simple
See 'git help config' and search for 'push.default' for further information.
(the 'simple' mode was introduced in Git 1.7.11. Use the similar mode
'current' instead of 'simple' if you sometimes use older versions of Git)
To /usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Archive-0.06/t/remote
c982f4a..b7d11a5 master -> master at /usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Archive-0.06/blib/lib/Git/Archive.pm line 155.
warning: push.default is unset; its implicit value is changing in
Git 2.0 from 'matching' to 'simple'. To squelch this message
and maintain the current behavior after the default changes, use:
git config --global push.default matching
To squelch this message and adopt the new behavior now, use:
git config --global push.default simple
See 'git help config' and search for 'push.default' for further information.
(the 'simple' mode was introduced in Git 1.7.11. Use the similar mode
'current' instead of 'simple' if you sometimes use older versions of Git)
To /usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Archive-0.06/t/remote
b7d11a5..4ed45a0 master -> master at t/basic.t line 209.
t/basic.t ............... ok
t/release-pod-syntax.t .. skipped: these tests are for release candidate testing
All tests successful.
Files=2, Tests=31, 3 wallclock secs ( 0.02 usr 0.05 sys + 0.78 cusr 1.84 csys = 2.70 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Data::Dumper 2.145 0
File::Path 2.09 0
Git::Repository 1.309 0
IPC::Cmd 0.90 0
Module::Build 0.4203 0.3601
Test::More 1.001002 0.88
strict 1.07 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9144
CPANPLUS::Dist::Build 0.74
Cwd 3.40
ExtUtils::CBuilder 0.280212
ExtUtils::Command 1.17
ExtUtils::Install 1.59
ExtUtils::MakeMaker 6.84
ExtUtils::Manifest 1.63
ExtUtils::ParseXS 3.22
File::Spec 3.40
Module::Build 0.4203
Pod::Parser 1.60
Pod::Simple 3.28
Test::Harness 3.30
Test::More 1.001002
version 0.9904
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.90.
Powered by minismokebox version 0.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/IPC-Run-0.92/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/IPC-Run-0.92/blib/arch:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/System-Command-1.107/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/System-Command-1.107/blib/arch:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Repository-1.309/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Repository-1.309/blib/arch:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Archive-0.06/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Archive-0.06/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 23351
PERL5_CPANPLUS_IS_VERSION = 0.9144
PERL5_MINISMOKEBOX = 0.58
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/thr/conf/perl-5.18.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/thr/perl-5.18.0/bin/perl5.18.0
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 18 subversion 0) configuration:
Platform:
osname=freebsd, osvers=9.2-release, archname=i386-freebsd-thread-multi
uname='freebsd frucht 9.2-release freebsd 9.2-release #0 r255898: fri sep 27 03:52:52 utc 2013 root@bake.isc.freebsd.org:usrobjusrsrcsysgeneric i386 '
config_args='-des -Dprefix=/usr/home/cpan/pit/thr/perl-5.18.0 -Dusethreads -Dcc=clang'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='clang', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 Compatible FreeBSD Clang 3.3 (tags/RELEASE_33/final 183502)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='clang', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt
perllibs=-lm -lcrypt
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_ITHREADS
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Built under freebsd
Compiled at Oct 4 2013 18:08:26
%ENV:
PERL5LIB=":/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/IPC-Run-0.92/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/IPC-Run-0.92/blib/arch:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/System-Command-1.107/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/System-Command-1.107/blib/arch:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Repository-1.309/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Repository-1.309/blib/arch:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Archive-0.06/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Archive-0.06/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="23351"
PERL5_CPANPLUS_IS_VERSION="0.9144"
PERL5_MINISMOKEBOX="0.58"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/thr/conf/perl-5.18.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/IPC-Run-0.92/blib/lib
/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/IPC-Run-0.92/blib/arch
/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/System-Command-1.107/blib/lib
/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/System-Command-1.107/blib/arch
/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Repository-1.309/blib/lib
/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Repository-1.309/blib/arch
/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Archive-0.06/blib/lib
/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Git-Archive-0.06/blib/arch
/usr/home/cpan/pit/thr/perl-5.18.0/lib/site_perl/5.18.0/i386-freebsd-thread-multi
/usr/home/cpan/pit/thr/perl-5.18.0/lib/site_perl/5.18.0
/usr/home/cpan/pit/thr/perl-5.18.0/lib/5.18.0/i386-freebsd-thread-multi
/usr/home/cpan/pit/thr/perl-5.18.0/lib/5.18.0
.