Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Perl6-Pod-0.60 v5.21.4 GNU/Linux
Date: 2014-08-27T03:43:30Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Zahatski Aliaksandr,
This is a computer-generated report for Perl6-Pod-0.60
on perl 5.21.4, created by CPAN-Reporter-1.2011.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from './Build test':
Eval-group not allowed at runtime, use re 'eval' in regex m/(?x)(?{; *Regexp::Grammars::LOGFILE
= Regexp::Grammars::_open_log('>>','-', 'for regex gramma.../ at (eval 11) line 826.
Compilation failed in require at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/Block/code.pm line 39.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/Block/code.pm line 39.
Compilation failed in require at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/Utl/Context.pm line 8.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/Utl/Context.pm line 8.
Compilation failed in require at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/To.pm line 32.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/To.pm line 32.
Compilation failed in require at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.3-121-g35c2140/127e/lib/5.21.4/base.pm line 99.
...propagated at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.3-121-g35c2140/127e/lib/5.21.4/base.pm line 108.
BEGIN failed--compilation aborted at t/00-attr.t line 10.
t/00-attr.t .............
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Eval-group not allowed at runtime, use re 'eval' in regex m/(?x)(?{; *Regexp::Grammars::LOGFILE
= Regexp::Grammars::_open_log('>>','-', 'for regex gramma.../ at (eval 11) line 826.
Compilation failed in require at t/01-parser.t line 12.
BEGIN failed--compilation aborted at t/01-parser.t line 12.
# Looks like your test exited with 255 before it could output anything.
t/01-parser.t ...........
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/2 subtests
Eval-group not allowed at runtime, use re 'eval' in regex m/(?x)(?{; *Regexp::Grammars::LOGFILE
= Regexp::Grammars::_open_log('>>','-', 'for regex gramma.../ at (eval 11) line 826.
Compilation failed in require at t/02.reg.t line 90.
BEGIN failed--compilation aborted at t/02.reg.t line 90.
# Looks like your test exited with 255 before it could output anything.
t/02.reg.t ..............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 13/13 subtests
Eval-group not allowed at runtime, use re 'eval' in regex m/(?x)(?{; *Regexp::Grammars::LOGFILE
= Regexp::Grammars::_open_log('>>','-', 'for regex gramma.../ at (eval 13) line 826.
Compilation failed in require at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/Block/code.pm line 39.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/Block/code.pm line 39.
Compilation failed in require at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/Utl/Context.pm line 8.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/Utl/Context.pm line 8.
Compilation failed in require at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/To.pm line 32.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/To.pm line 32.
Compilation failed in require at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/Test.pm line 4.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/Test.pm line 4.
Compilation failed in require at t/lib/TBase.pm line 10.
BEGIN failed--compilation aborted at t/lib/TBase.pm line 10.
Compilation failed in require at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.3-121-g35c2140/127e/lib/5.21.4/base.pm line 99.
...propagated at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.3-121-g35c2140/127e/lib/5.21.4/base.pm line 108.
BEGIN failed--compilation aborted at t/lib/T/Block/code.pm line 14.
Compilation failed in require at t/04_Blocks.t line 9.
BEGIN failed--compilation aborted at t/04_Blocks.t line 9.
t/04_Blocks.t ...........
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Eval-group not allowed at runtime, use re 'eval' in regex m/(?x)(?{; *Regexp::Grammars::LOGFILE
= Regexp::Grammars::_open_log('>>','-', 'for regex gramma.../ at (eval 10) line 934.
# Looks like your test exited with 255 before it could output anything.
t/05-formatcodes.t ......
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 16/16 subtests
Eval-group not allowed at runtime, use re 'eval' in regex m/(?x)(?{; *Regexp::Grammars::LOGFILE
= Regexp::Grammars::_open_log('>>','-', 'for regex gramma.../ at (eval 11) line 826.
Compilation failed in require at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/Block/code.pm line 39.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/Block/code.pm line 39.
Compilation failed in require at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/Utl/Context.pm line 8.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/Utl/Context.pm line 8.
Compilation failed in require at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/To.pm line 32.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/To.pm line 32.
Compilation failed in require at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/To/XHTML.pm line 46.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-8250-TvbhxB/Perl6-Pod-0.60-Nx6Ya5/blib/lib/Perl6/Pod/To/XHTML.pm line 46.
Compilation failed in require at t/lib/T/FormattingCode/A.pm line 12.
BEGIN failed--compilation aborted at t/lib/T/FormattingCode/A.pm line 12.
Compilation failed in require at t/05_FormattingCodes.t line 9.
BEGIN failed--compilation aborted at t/05_FormattingCodes.t line 9.
t/05_FormattingCodes.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Test Summary Report
-------------------
t/00-attr.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/01-parser.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/02.reg.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 13 tests but ran 0.
t/04_Blocks.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/05-formatcodes.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 16 tests but ran 0.
t/05_FormattingCodes.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=6, Tests=0, 6 wallclock secs ( 0.02 usr 0.00 sys + 6.17 cusr 0.03 csys = 6.22 CPU)
Result: FAIL
Failed 6/6 test programs. 0/0 subtests failed.
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
---------------- ----- ------
Encode 0 2.62
Filter::Simple 0 0.92
Getopt::Long 0 2.42
Pod::Usage 0 1.64
Regexp::Grammars 1.021 1.035
Test::Class 0 0.46
Tie::UnionHash 0.02 0.02
XML::Flow 0 0.86
configure_requires:
Module Need Have
---------------- ----- ------
Module::Build 0.38 0.4208
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB = /tmp/loop_over_bdir-8250-TvbhxB/FusionInventory-Agent-2.3.10.1-h2PSg6/blib/arch:/tmp/loop_over_bdir-8250-TvbhxB/FusionInventory-Agent-2.3.10.1-h2PSg6/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 25653
PERL5_CPAN_IS_RUNNING = 25653
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /tmp/basesmoker-reloperl-hRJZ/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.05
CPAN::Meta 2.142060
Cwd 3.49
ExtUtils::CBuilder 0.280217
ExtUtils::Command 1.18
ExtUtils::Install 1.68
ExtUtils::MakeMaker 6.98
ExtUtils::Manifest 1.65
ExtUtils::ParseXS 3.25
File::Spec 3.49
JSON 2.90
JSON::PP 2.27203
Module::Build 0.4208
Module::Signature 0.73
Parse::CPAN::Meta 1.4414
Test::Harness 3.33
Test::More 1.001003
YAML 1.09
YAML::Syck 1.27
version 0.9909
--
Summary of my perl5 (revision 5 version 21 subversion 4) configuration:
Commit id: 35c2140b05a9a1683ea74d158942a454ab66b443
Platform:
osname=linux, osvers=3.14-2-amd64, archname=x86_64-linux-ld
uname='linux k83 3.14-2-amd64 #1 smp debian 3.14.15-2 (2014-08-09) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.3-121-g35c2140/127e -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Uuseithreads -Duselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2',
optimize='-O2 -g',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.9.1', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16, longdblkind=3
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/4.9/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.19.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.19'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
PERL_USE_DEVEL USE_64_BIT_ALL USE_64_BIT_INT
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_LOCALE_TIME
USE_LONG_DOUBLE USE_PERLIO USE_PERL_ATOF
Built under linux
Compiled at Aug 25 2014 08:06:32
%ENV:
PERL5LIB="/tmp/loop_over_bdir-8250-TvbhxB/FusionInventory-Agent-2.3.10.1-h2PSg6/blib/arch:/tmp/loop_over_bdir-8250-TvbhxB/FusionInventory-Agent-2.3.10.1-h2PSg6/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="25653"
PERL5_CPAN_IS_RUNNING="25653"
PERL_MM_USE_DEFAULT="1"
@INC:
/tmp/loop_over_bdir-8250-TvbhxB/FusionInventory-Agent-2.3.10.1-h2PSg6/blib/arch
/tmp/loop_over_bdir-8250-TvbhxB/FusionInventory-Agent-2.3.10.1-h2PSg6/blib/lib
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.3-121-g35c2140/127e/lib/site_perl/5.21.4/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.3-121-g35c2140/127e/lib/site_perl/5.21.4
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.3-121-g35c2140/127e/lib/5.21.4/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.3-121-g35c2140/127e/lib/5.21.4
.