Math-MPFR v4.35 Perl 5 v5.28.0 OpenBSD.amd64-openbsd-thread-multi
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Math-MPFR v4.35
- Platform
- Perl 5 v5.28.0 OpenBSD.amd64-openbsd-thread-multi
- Date
- 2025-03-01 01:48:34
- ID
- 492ae160-f63f-11ef-98b0-b3c3213a625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear SISYPHUS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
"/home/cpan/pit/thr/perl-5.28.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- MPFR.bs blib/arch/auto/Math/MPFR/MPFR.bs 644
"/home/cpan/pit/thr/perl-5.28.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Prec.bs ../blib/arch/auto/Math/MPFR/Prec/Prec.bs 644
"/home/cpan/pit/thr/perl-5.28.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Random.bs ../blib/arch/auto/Math/MPFR/Random/Random.bs 644
"/home/cpan/pit/thr/perl-5.28.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- V.bs ../blib/arch/auto/Math/MPFR/V/V.bs 644
"/home/cpan/pit/thr/perl-5.28.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Prec.bs ../blib/arch/auto/Math/MPFR/Prec/Prec.bs 644
No tests defined for Math::MPFR::Prec extension.
"/home/cpan/pit/thr/perl-5.28.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Random.bs ../blib/arch/auto/Math/MPFR/Random/Random.bs 644
No tests defined for Math::MPFR::Random extension.
"/home/cpan/pit/thr/perl-5.28.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- V.bs ../blib/arch/auto/Math/MPFR/V/V.bs 644
No tests defined for Math::MPFR::V extension.
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.28.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
GMP Header version (major): 6
GMP Header version (minor): 2
GMP Header version (patchlevel): 1
GMP CC: cc
GMP CFLAGS: -O2 -pipe -g
MPFR Header version (major): 4
MPFR Header version (minor): 2
MPFR Header version (patchlevel): 0
t/_1aaa_v.t ...................... ok
# Using Math::MPFR version 4.35
# MPFR_VERSION is 262656
# Using mpfr library version 4.2.0
# Using gmp library version 6.2.1
# GMP_LIMB_BITS is 64
# GMP_NAIL_BITS is 0
# __GMP__CFLAGS is -O2 -pipe -g
# __GMP__CC is cc
# sizeof mpfr_exp_t: 8 bytes
# sizeof mpfr_prec_t: 8 bytes
# has _WIN32_BIZARRE_INFNAN: 0
# has MPFR_PV_NV_BUG: 0
# has WIN32_FMT_BUG: 0
# has _Float16 0
# Machine appears to be little-endian
# Byte Order: 12345678
# mpfr library built WITHOUT thread safety
# mpfr library built WITHOUT _Decimal64 support
# mpfr library built WITHOUT _Decimal128 support
# mpfr library built WITHOUT __float128 support
# mpfr library built WITHOUT gmp internals
# mpfr library built WITHOUT shared cache
# mpfr library thresholds file: src/x86_64/mparam.h
t/_1basic.t ...................... ok
Skipping test 3 - no long double support
t/_2exp.t ........................ ok
t/_Float16.t ..................... ok
Skipping for 5.028000 - the aim here is to detect any recent changes,
not to concern ourselves with old behaviour.
t/_itsa.t ........................ ok
t/anomaly.t ...................... ok
t/anytoa.t ....................... ok
t/atonum.t ....................... ok
t/atonv.t ........................ ok
t/base_conversion.t .............. ok
t/bessel.t ....................... ok
t/buildopt.t ..................... ok
byteorder: 12345678
longdblkind: 3: x86 80-bit little endian
HAVE_IEEE_754_LONG_DOUBLE is 0
HAVE_EXTENDED_PRECISION_LONG_DOUBLE is 1
t/bytes.t ........................ ok
t/cmp_uj_sj.t .................... ok
MPFR_VERSION: 262656
MPFR_VERSION_STRING: 4.2.0
t/compound.t ..................... ok
FYI:
DBL_DIG = 15
FYI:
LDBL_DIG = 18
FYI:
FLT128_DIG not defined
t/constants.t .................... ok
Skipping all tests - Math::MPFR not built with MPFR_WANT_DECIMAL64 defined
t/D64_LD.t ....................... ok
Skipping all tests - Math::MPFR not built with MPFR_WANT_DECIMAL_FLOATS defined
t/decimal128_conv.t .............. ok
Skipping all tests - Math::MPFR not built with MPFR_WANT_DECIMAL_FLOATS defined
t/decimal64_conv.t ............... ok
t/decimalize.t ................... ok
Skipping tests 2c and 2d - no Math::GMP or Math::GMPz
Skipping tests 2e and 2f - no Math::GMPq
t/div_by_zero.t .................. ok
Skipping all tests - not a Double-Double build
t/DoubleDouble.t ................. ok
not a Double-Double build.
LDBL_MANT_DIG is 64
t/DoubleDouble2.t ................ ok
t/doubletoa.t .................... ok
t/exceptions.t ................... ok
t/faithful_rounding.t ............ ok
Skipping tests 21 .. 41 - couldn't load Math::GMPZ:
$@: Can't locate Math/GMPz.pm in @INC (you may need to install the Math::GMPz module) (@INC contains: /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5 /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch /home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0 /home/cpan/pit/thr/perl-5.28.0/lib/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.28.0/lib/5.28.0 .) at t/flags.t line 255.
t/flags.t ........................ ok
Skipping all tests: __float128 tests not applicable to this build of perl
t/float128_conv.t ................ ok
skipping all tests - nvtype is not __float128
t/float128_subnormal.t ........... ok
t/get_IV.t ....................... ok
t/get_NV.t ....................... ok
t/grandom.t ...................... ok
t/hex_fmt.t ...................... ok
t/infnan_str.t ................... ok
t/inits.t ........................ ok
t/integer_string.t ............... ok
t/lngamma_bug.t .................. ok
Skipping all tests - Math::LongDouble not found
t/LongDouble.t ................... ok
t/MPFR_RND.t ..................... ok
t/mpfrtoa.t ...................... ok
t/mpfrtoa_precisions.t ........... ok
t/nan_cmp.t ...................... ok
Skipping all tests - nvtype is double
t/native_float128.t .............. ok
t/neg_zero_bug.t ................. ok
Skipping test 5 - no Math::GMPf
Skipping test 6 - no Math::GMPq
Skipping test 7 - no Math::GMPz
Skipping test 8 - no Math::GMP
t/new.t .......................... ok
t/new_in_4.0.0.t ................. ok
t/new_in_4.1.0.t ................. ok
t/new_pow_log_exp.t .............. ok
ISSUE_19550 not set
t/NOK_and_POK.t .................. ok
Skipping test 5 - no 'long long' support
t/not_zero.t ..................... ok
t/numtoa.t ....................... ok
t/NV_overloading.t ............... ok
t/nvtoa.t ........................ ok
Avoiding perl for string to NV assignment. (Perl is UNRELIABLE)
t/nvtoa2.t ....................... ok
t/nvtoa3.t ....................... skipped: Perl's string to NV assignment is unreliable
t/nvtoa_dd.t ..................... ok
t/nvtoa_subnormal.t .............. ok
t/out_str.t ...................... ok
t/overload.t ..................... ok
$@:Can't locate Math/GMPq.pm in @INC (you may need to install the Math::GMPq module) (@INC contains: /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5 /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch /home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0 /home/cpan/pit/thr/perl-5.28.0/lib/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.28.0/lib/5.28.0 .) at t/overload_cmp_q.t line 5.
Skipping all tests - couldn't load Math::GMPq
t/overload_cmp_q.t ............... ok
$@:Can't locate Math/GMPz.pm in @INC (you may need to install the Math::GMPz module) (@INC contains: /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5 /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch /home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0 /home/cpan/pit/thr/perl-5.28.0/lib/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.28.0/lib/5.28.0 .) at t/overload_cmp_z.t line 5.
Skipping all tests - couldn't load Math::GMPz
t/overload_cmp_z.t ............... ok
Version 0.35 (or later) of the following modules is needed for a more
complete implementation of cross_class overloading:
Math::GMPz - currently not installed
Math::GMPf - currently not installed
Math::GMPq - currently not installed
Skipping test 1 - no Math::GMPz
Skipping test 2 - no Math::GMPf
Skipping test 3 - no Math::GMPq
t/overload_cross_class.t ......... ok
Skipping all tests - can't pass __float128 type
t/overload_float128.t ............ ok
$@: Can't locate Math/GMP.pm in @INC (you may need to install the Math::GMP module) (@INC contains: /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5 /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch /home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0 /home/cpan/pit/thr/perl-5.28.0/lib/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.28.0/lib/5.28.0 .) at t/overload_math_gmp.t line 21.
Skipping all tests as Math::GMP could not be loaded
t/overload_math_gmp.t ............ ok
Skipping Math::GMPz tests - couldn't load Math::GMPz at t/overload_mod.t line 108.
Skipping Math::GMPq tests - couldn't load Math::GMPq at t/overload_mod.t line 140.
t/overload_mod.t ................. ok
t/overload_shift.t ............... ok
t/overload_switch.t .............. ok
t/overloadex.t ................... ok
t/P_specifier.t .................. ok
Skipping test 1 - no recent version of Test::Pod installed
t/pod.t .......................... ok
t/printf.t ....................... ok
MPFR_PV_NV_BUG set to 0
t/PV_NV_BUG.t .................... ok
t/q_arith.t ...................... skipped: Math::GMPq not available
t/random2.t ...................... ok
t/random3.t ...................... ok
t/remainder.t .................... ok
t/Rmpfr_asinu.t .................. ok
t/Rmpfr_fmod_ui.t ................ ok
Skipping all tests - Couldn't load Math::GMPq
t/Rmpfr_get_q.t .................. ok
$@: Can't locate Math/GMPq.pm in @INC (you may need to install the Math::GMPq module) (@INC contains: /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5 /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch /home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0 /home/cpan/pit/thr/perl-5.28.0/lib/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.28.0/lib/5.28.0 .) at t/Rmpfr_q_div_and_Rmpfr_z_div.t line 7.
Skipping mpq tests - couldn't load Math::GMPq
$@: Can't locate Math/GMPz.pm in @INC (you may need to install the Math::GMPz module) (@INC contains: /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0 /home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/jail/P8_68jOGns/lib/perl5 /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib /home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch /home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0 /home/cpan/pit/thr/perl-5.28.0/lib/5.28.0/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.28.0/lib/5.28.0 .) at t/Rmpfr_q_div_and_Rmpfr_z_div.t line 153.
Skipping mpz tests - couldn't load Math::GMPz
t/Rmpfr_q_div_and_Rmpfr_z_div.t .. ok
t/Rmpfr_rec_root.t ............... ok
t/Rmpfr_rootn_ui.t ............... ok
t/Rmpfr_sinu.t ................... ok
# Minimum allowed exponent: -4611686018427387903
# Current minimum exponent: -1073741823
Skipping test 34 - Rmpfr_get_emin() != Rmpfr_get_emin_min()
Skipping tests 55 & 56
as Math::GMPq failed to load
Skipping tests 60 & 61
as Math::GMPz failed to load
Skipping tests 66 & 67
as Math::GMPq failed to load
Skipping tests 71 & 72
as Math::GMPz failed to load
Skipping tests 80 && 81
as Math::GMPq failed to load
Skipping tests 86 & 87
as Math::GMPz failed to load
Skipping tests 104 & 105
as Math::GMPq failed to load
Skipping tests 109, 110 & 111
as Math::GMPz failed to load
Skipping test 125 - __float128 not supported
Skipping test 126 - long double not supported
Skipping test 130
as Math::GMPz failed to load
t/rndna.t ........................ ok
# Minimum allowed exponent: -4611686018427387903
# Current minimum exponent: -1073741823
Skipping tests 55 & 56
as Math::GMPq failed to load
Skipping tests 60 & 61
as Math::GMPz failed to load
Skipping tests 66 & 67
as Math::GMPq failed to load
Skipping tests 71 & 72
as Math::GMPz failed to load
Skipping tests 80 && 81
as Math::GMPq failed to load
Skipping tests 86 & 87
as Math::GMPz failed to load
Skipping tests 104 & 105
as Math::GMPq failed to load
Skipping tests 109, 110 & 111
as Math::GMPz failed to load
Skipping test 125 - __float128 not supported
Skipping test 126 - long double not supported
Skipping test 130
as Math::GMPz failed to load
t/rndna2.t ....................... ok
Skipping all tests because Math::Ryu is unavailable
t/ryu_checks.t ................... ok
Using *_set_ui,*_set_si _cmp_ui and cmp_si functions
t/set_IV.t ....................... ok
Using mpfr*_set_d and mpfr_cmp_d functions
t/set_NV.t ....................... ok
t/set_str.t ...................... ok
t/sign.t ......................... ok
t/sizes.t ........................ ok
t/snprintf.t ..................... ok
t/sprintf.t ...................... ok
t/subnormal_doubles.t ............ ok
Calling all cache freeing functions
Skipping tests 4, 5 and 6 - not relevant to this build
t/sum.t .......................... ok
Skipping test 10 - no Math::GMPz
Skipping test 11 - no Math::GMPz
Skipping test 23 - no Math::GMPz
Skipping test 24 - no Math::GMPq
Skipping test 40 - no Math::GMPf
Skipping test 41 - no Math::GMPz
Skipping test 45 - no Math::GMPz
Skipping test 46 - no Math::GMPq
Skipping test 47 - no Math::GMPf
Skipping test 48 - no Math::GMPz
Skipping test 53: Rmpfr_random2 no longer implemented
Skipping test 62 - no Math::GMPz
Skipping test 73 - no Math::GMPz
Skipping test 74 - no Math::GMP
Skipping test 75 - no Math::GMPf
Skipping test 83: No Math::GMPz
Skipping test 84: No Math::GMP
t/test1.t ........................ ok
Skipping test 1 - no Math::GMP or Math::GMPz
Skipping test 2 - no Math::GMP or Math::GMPz
Skipping test 3 - no Math::GMP or Math::GMPz
Skipping test 4 - no Math::GMP or Math::GMPz
Skipping test 5 - no Math::GMP or Math::GMPz
Skipping test 8 - no Math::GMP or Math::GMPz
t/test2.t ........................ ok
Skipping test 1 - no Math::GMPz
Skipping test 2 - no Math::GMPq
Skipping test 3 - no Math::GMPf
Skipping test 4 - no Math::GMP
t/test3.t ........................ ok
Skipping test 31 - no Math::GMPq
t/test4.t ........................ ok
Skipping all tests: Your mpfr library was not built with '--enable-thread-safe'
t/tls.t .......................... ok
Skipping all tests: Your mpfr library was not built with '--enable-thread-safe'
t/tls_flags.t .................... ok
t/trig.t ......................... ok
t/trigamma.t ..................... ok
t/TRmpfr_out_str.t ............... ok
t/underflow.t .................... ok
long long int support is absent
Skipping test 4 - nothing to test
t/use64bitint.t .................. ok
Skipping test 2 - nothing to test
Skipping test 3 - nothing to test
Skipping test 4 - no long double support
Skipping test 6 - no long double support
Skipping test 7 - no long double support
Skipping test 8 - no long double support
Skipping test 9 - no long double support
Skipping test 10 - no long double support
t/uselongdouble.t ................ ok
No tests here - just output (if any) from any configuration
probing that was done during the 'perl Makefile.PL' step
checklib.exe: Found the mpfr and gmp libraries
try_64 build: have_d64.in:2:2: error: GNU decimal type extension not supported
_Decimal64 x;
^
1 error generated.
try_128 build: have_d128.in:2:2: error: GNU decimal type extension not supported
_Decimal128 x;
^
1 error generated.
try_flt128 build: ld: error: unable to find library -lquadmath
cc: error: linker command failed with exit code 1 (use -v to see invocation)
t/view_config.t .................. ok
All tests successful.
Files=108, Tests=33340, 40 wallclock secs ( 3.12 usr 0.78 sys + 30.70 cusr 4.13 csys = 38.73 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.70 0
Test::More 1.302200 0.88
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.70
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.70
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.51
File::Spec 3.75
Module::Build 0.4234
Pod::Parser 1.63
Pod::Simple 3.35
Test2 1.302200
Test::Harness 3.48
Test::More 1.302200
version 0.9932
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/jail/P8_68jOGns/bin:/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin
PERL5LIB = /home/cpan/pit/jail/P8_68jOGns/lib/perl5:/home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib:/home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 80868
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.28.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/P8_68jOGns
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/P8_68jOGns"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/P8_68jOGns
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.28.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 28 subversion 0) configuration:
Platform:
osname=openbsd
osvers=7.3
archname=OpenBSD.amd64-openbsd-thread-multi
uname='openbsd overture.bingosnet.co.uk 7.3 generic#1072 amd64 '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.28.0 -Dusethreads'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-pthread -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
optimize='-O2'
cppflags='-pthread -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='OpenBSD Clang 13.0.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags ='-pthread -Wl,-E -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/lib/clang/13.0.0/lib /usr/lib /usr/local/lib
libs=-lpthread -lgdbm -lm -lutil -lc
perllibs=-lpthread -lm -lutil -lc
libc=/usr/lib/libc.so.97.0
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags=' '
cccdlflags='-DPIC -fPIC '
lddlflags='-shared -fPIC -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 2.08
Built under openbsd
Compiled at May 30 2023 10:08:51
%ENV:
PERL5LIB="/home/cpan/pit/jail/P8_68jOGns/lib/perl5:/home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib:/home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="80868"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.28.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/P8_68jOGns"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/P8_68jOGns""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/P8_68jOGns"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/jail/P8_68jOGns/lib/perl5/5.28.0
/home/cpan/pit/jail/P8_68jOGns/lib/perl5/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/jail/P8_68jOGns/lib/perl5
/home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/lib
/home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/ZBAm2p_2Nc/Math-MPFR-4.35/blib/arch
/home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0
/home/cpan/pit/thr/perl-5.28.0/lib/5.28.0/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/thr/perl-5.28.0/lib/5.28.0