Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Net-Write-Fast-0.15 v5.21.4 GNU/Linux
Date: 2015-02-20T06:18:26Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Patrice Auffret,
This is a computer-generated report for Net-Write-Fast-0.15
on perl 5.21.4, created by CPAN-Reporter-1.2011.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
"/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Fast.bs blib/arch/auto/Net/Write/Fast/Fast.bs 644
PERL_DL_NONLAZY=1 "/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Test 1 got: "0" (t/01-module.t at line 6)
# Expected: "1" (Can't locate Time/Interval.pm in @INC (you may need to install the Time::Interval module) (@INC contains: /tmp/loop_over_bdir-19919-9o1ENW/Net-Write-Fast-0.15-aXJiJl/blib/lib /tmp/loop_over_bdir-19919-9o1ENW/Net-Write-Fast-0.15-aXJiJl/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/site_perl/5.21.4/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/site_perl/5.21.4 /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/5.21.4/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/5.21.4 .) at /tmp/loop_over_bdir-19919-9o1ENW/Net-Write-Fast-0.15-aXJiJl/blib/lib/Net/Write/Fast.pm line 31.
#BEGIN failed--compilation aborted at /tmp/loop_over_bdir-19919-9o1ENW/Net-Write-Fast-0.15-aXJiJl/blib/lib/Net/Write/Fast.pm line 31.
#Compilation failed in require at (eval 2) line 1.
#BEGIN failed--compilation aborted at (eval 2) line 1.
#)
# t/01-module.t line 6 is: 1,
t/01-module.t ............
Failed 1/1 subtests
# Failed test 'Pod coverage on Net::Write::Fast'
# at t/02-pod-coverage.t line 8.
# Net::Write::Fast: requiring 'Net::Write::Fast' failed
# Looks like you failed 1 test of 1.
t/02-pod-coverage.t ......
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/03-test-pod.t .......... ok
Can't locate Time/Interval.pm in @INC (you may need to install the Time::Interval module) (@INC contains: /tmp/loop_over_bdir-19919-9o1ENW/Net-Write-Fast-0.15-aXJiJl/blib/lib /tmp/loop_over_bdir-19919-9o1ENW/Net-Write-Fast-0.15-aXJiJl/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/site_perl/5.21.4/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/site_perl/5.21.4 /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/5.21.4/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/5.21.4 .) at /tmp/loop_over_bdir-19919-9o1ENW/Net-Write-Fast-0.15-aXJiJl/blib/lib/Net/Write/Fast.pm line 31.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-19919-9o1ENW/Net-Write-Fast-0.15-aXJiJl/blib/lib/Net/Write/Fast.pm line 31.
Compilation failed in require at t/04-l4-send-tcp-syn4.t line 4.
BEGIN failed--compilation aborted at t/04-l4-send-tcp-syn4.t line 4.
t/04-l4-send-tcp-syn4.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests
Can't locate Time/Interval.pm in @INC (you may need to install the Time::Interval module) (@INC contains: /tmp/loop_over_bdir-19919-9o1ENW/Net-Write-Fast-0.15-aXJiJl/blib/lib /tmp/loop_over_bdir-19919-9o1ENW/Net-Write-Fast-0.15-aXJiJl/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/site_perl/5.21.4/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/site_perl/5.21.4 /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/5.21.4/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/5.21.4 .) at /tmp/loop_over_bdir-19919-9o1ENW/Net-Write-Fast-0.15-aXJiJl/blib/lib/Net/Write/Fast.pm line 31.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-19919-9o1ENW/Net-Write-Fast-0.15-aXJiJl/blib/lib/Net/Write/Fast.pm line 31.
Compilation failed in require at t/05-l4-send-tcp-syn6.t line 4.
BEGIN failed--compilation aborted at t/05-l4-send-tcp-syn6.t line 4.
t/05-l4-send-tcp-syn6.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests
Test Summary Report
-------------------
t/01-module.t (Wstat: 0 Tests: 1 Failed: 1)
Failed test: 1
t/02-pod-coverage.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/04-l4-send-tcp-syn4.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 1 tests but ran 0.
t/05-l4-send-tcp-syn6.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 1 tests but ran 0.
Files=5, Tests=3, 1 wallclock secs ( 0.04 usr 0.01 sys + 0.24 cusr 0.01 csys = 0.30 CPU)
Result: FAIL
Failed 4/5 test programs. 2/3 subtests failed.
Makefile:981: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 2
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- -------- --------
DynaLoader 0 1.26
Exporter 0 5.71
perl 5.006001 5.021004
build_requires:
Module Need Have
------------------- -------- --------
ExtUtils::MakeMaker 0 7.05_13
configure_requires:
Module Need Have
------------------- -------- --------
ExtUtils::MakeMaker 0 7.05_13
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 19920
PERL5_CPAN_IS_RUNNING = 19920
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- ------------
CPAN 2.09
CPAN::Meta 2.143240
Cwd 3.50
ExtUtils::CBuilder 0.280220
ExtUtils::Command 7.05_13
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.05_13
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.25
File::Spec 3.50
JSON 2.90
JSON::PP 2.27203
Module::Build 0.4211
Module::Signature 0.73
Parse::CPAN::Meta 1.4414
Test::Harness 3.35
Test::More 1.301001_098
YAML 1.14
YAML::Syck 1.29
version 0.9912
--
Summary of my perl5 (revision 5 version 21 subversion 4) configuration:
Commit id: 84c122ba1d2b7b856521ceffc2a095716a739335
Platform:
osname=linux, osvers=3.16.0-4-amd64, archname=x86_64-linux-thread-multi
uname='linux k83 3.16.0-4-amd64 #1 smp debian 3.16.7-ckt2-1 (2014-12-08) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980 -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Duseithreads -Uuselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2',
optimize='-O2 -g',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion='', gccversion='4.9.2', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16, longdblkind=3
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/4.9/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=libc-2.19.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.19'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
PERL_USE_DEVEL USE_64_BIT_ALL USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LOCALE_TIME USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Built under linux
Compiled at Jan 10 2015 04:22:38
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="19920"
PERL5_CPAN_IS_RUNNING="19920"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/site_perl/5.21.4/x86_64-linux-thread-multi
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/site_perl/5.21.4
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/5.21.4/x86_64-linux-thread-multi
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.4/9980/lib/5.21.4
.