Back
From: metabase:user:605733f7-6bf4-1014-9fd9-f5c948f79432
Subject: FAIL git-deploy-6.01 v5.16.3 GNU/Linux
Date: 2013-04-27T20:51:37Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear AEvar Arnfjord Bjarmason,
This is a computer-generated report for git-deploy-6.01
on perl 5.16.3, created by CPAN-Reporter-1.2009.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_compile.t .. ok
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy start >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <25>, but we wanted <0>: Illegal seek'
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# Failed test 'We created a tag because there wasn't one already'
# at t/run.t line 25.
# ''
# doesn't match '(?^:debug)'
# Failed test 'We print a notice about the deploy being started'
# at t/run.t line 26.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:Deploy procedure has started)'
# Failed test 'By default we don't send mail on 'start''
# at t/run.t line 27.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:Not sending mail on action)'
# Failed test 'We push any tags we have to origin on startup'
# at t/run.t line 28.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy status >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <0>, but we wanted <1>: '
# at t/lib/Git/Deploy/Test.pm line 23.
# Failed test 'We note the correct status'
# at t/run.t line 35.
# '# NOTE : No debug deployment currently in progress
# '
# doesn't match '(?^:debug rollout started - not synced yet)'
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy sync >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <25>, but we wanted <1>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# Failed test 'XXX: On our first sync we bitch about the tag we just made. We shouldn't do that.'
# at t/run.t line 43.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:It seems like there is nothing to sync)'
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy --force sync >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <1>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# Failed test 'XXX: On our first sync we bitch about the tag we just made. We shouldn't do that.'
# at t/run.t line 55.
# '# INFO : Starting step 'sync' at 2013-04-27 17:51:35
# # FATAL: It looks like you havent started yet!
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:--force enabling rolling out same thing you had when you started)'
# Failed test 'We don't have any sync hook yet'
# at t/run.t line 60.
# '# INFO : Starting step 'sync' at 2013-04-27 17:51:35
# # FATAL: It looks like you havent started yet!
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:You must now hand execute the synchronization process and then execute)'
# Failed test 'Should be in output: Step 'sync' finished'
# at t/run.t line 69.
# '# INFO : Starting step 'sync' at 2013-04-27 17:51:35
# # FATAL: It looks like you havent started yet!
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'sync' finished)'
# Failed test 'Should be in output: git push --tags origin'
# at t/run.t line 69.
# '# INFO : Starting step 'sync' at 2013-04-27 17:51:35
# # FATAL: It looks like you havent started yet!
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'Should be in output: Not sending mail on action 'sync''
# at t/run.t line 69.
# '# INFO : Starting step 'sync' at 2013-04-27 17:51:35
# # FATAL: It looks like you havent started yet!
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:Not sending mail on action 'sync')'
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy status >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <0>, but we wanted <2>: '
# at t/lib/Git/Deploy/Test.pm line 23.
# Failed test 'We note the correct status'
# at t/run.t line 80.
# '# NOTE : No debug deployment currently in progress
# '
# doesn't match '(?^:debug rollout tagged - awaiting sync)'
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy finish >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# Failed test 'Should be in output: Looks like you are all done! Have a nice day'
# at t/run.t line 90.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:Looks like you are all done! Have a nice day)'
# Failed test 'Should be in output: git push --tags origin'
# at t/run.t line 90.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'Should be in output: Step 'finish' finished.'
# at t/run.t line 90.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'finish' finished.)'
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy start >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# Failed test 'We finished the start step'
# at t/run.t line 107.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'start' finished)'
# Failed test 'We have stuff in 'log''
# at t/run.t line 120.
# ''
# doesn't match '(?^:This is a commit message)'
# Failed test 'We have stuff in 'diff''
# at t/run.t line 130.
# ''
# doesn't match '(?^:CHANGES)'
# Failed test 'The tag we had before rollout is <>'
# at t/run.t line 141.
# ''
# doesn't match '(?^:^debug-)'
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy sync >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <25>, but we wanted <1>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# Failed test 'Should be in output: It looks like there are unpushed commits'
# at t/run.t line 152.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:It looks like there are unpushed commits)'
# Failed test 'Should be in output: Most likely this is harmless'
# at t/run.t line 152.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:Most likely this is harmless)'
# Failed test 'We should get a commit message in the output'
# at t/run.t line 155.
# ''
# doesn't match '(?^:This is a commit message)'
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy status >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <0>, but we wanted <1>: '
# at t/lib/Git/Deploy/Test.pm line 23.
# Failed test 'We note the correct status'
# at t/run.t line 166.
# '# NOTE : No debug deployment currently in progress
# '
# doesn't match '(?^:debug rollout started - not synced yet)'
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy sync >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# Failed test 'We don't have any sync hook yet'
# at t/run.t line 176.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:You must now hand execute the synchronization process and then execute)'
# Failed test 'Should be in output: Step 'sync' finished'
# at t/run.t line 185.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'sync' finished)'
# Failed test 'Should be in output: git push --tags origin'
# at t/run.t line 185.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'Should be in output: Not sending mail on action 'sync''
# at t/run.t line 185.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:Not sending mail on action 'sync')'
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy status >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <0>, but we wanted <2>: '
# at t/lib/Git/Deploy/Test.pm line 23.
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy finish >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# Failed test 'Should be in output: Looks like you are all done! Have a nice day'
# at t/run.t line 205.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:Looks like you are all done! Have a nice day)'
# Failed test 'Should be in output: git push --tags origin'
# at t/run.t line 205.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:git push --tags origin)'
# Failed test 'Should be in output: Step 'finish' finished.'
# at t/run.t line 205.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:Step 'finish' finished.)'
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy revert 2 >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# Failed test 'Should be in output: You've selected the choice <2>'
# at t/run.t line 219.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:You've selected the choice <2>)'
# Failed test 'Should be in output: The following commits are available'
# at t/run.t line 219.
# '# FATAL: Please make sure you execute:
# # FATAL:
# # FATAL: git config --global user.name 'Your Name'
# # FATAL: git config --global user.email 'email@host.com'
# # FATAL:
# # FATAL: before you use this tool
# Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# '
# doesn't match '(?^:The following commits are available)'
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy sync >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
# Failed test 'The command </home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl -I/home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/git-deploy-lib /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy finish >/tmp/git-deploy-XSWd7/output/last_stdout 2>/tmp/git-deploy-XSWd7/output/last_stderr> exited with <25>, but we wanted <0>: '
# at t/lib/Git/Deploy/Test.pm line 23.
Died at /home/jackal/.cpan/build/git-deploy-6.01-L8dstZ/bin/git-deploy line 45.
fatal: ambiguous argument '..': both revision and filename
Use '--' to separate filenames from revisions
# Looks like you failed 47 tests of 89.
# Failed test 'A rollout etc.'
# at t/lib/Git/Deploy/Test.pm line 98.
# Looks like you failed 1 test of 1.
t/run.t .........
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
Test Summary Report
-------------------
t/run.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=2, Tests=6, 3 wallclock secs ( 0.04 usr 0.01 sys + 1.64 cusr 0.54 csys = 2.23 CPU)
Result: FAIL
Failed 1/2 test programs. 1/6 subtests failed.
make: *** [test_dynamic] Error 1
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
--------------------- ---- --------
Carp 0 1.26
constant 0 1.23
Cwd 0 3.39_02
Data::Dumper 0 2.135_06
Exporter 0 5.66
Fcntl 0 1.11
File::Basename 0 2.84
File::Spec::Functions 0 3.39_02
FindBin 0 1.51
Getopt::Long 0 2.38
Memoize 0 1.02
Pod::Usage 0 1.51
POSIX 0 1.30
strict 0 1.07
Sys::Hostname 0 1.16
Term::ReadLine 0 1.09
Time::HiRes 0 1.9725
warnings 0 1.13
build_requires:
Module Need Have
--------------------- ---- --------
File::Temp 0 0.22
Test::More 0 0.98
configure_requires:
Module Need Have
--------------------- ---- --------
ExtUtils::MakeMaker 6.30 6.63_02
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /home/jackal/perl5/perlbrew/bin:/home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin:/usr/lib/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/jackal/bin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 19754
PERL5_CPAN_IS_RUNNING = 19754
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 1805,19754
PERLBREW_BASHRC_VERSION = 0.59
PERLBREW_HOME = /home/jackal/.perlbrew
PERLBREW_MANPATH = /home/jackal/perl5/perlbrew/perls/perl-5.16.3/man
PERLBREW_PATH = /home/jackal/perl5/perlbrew/bin:/home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin
PERLBREW_PERL = perl-5.16.3
PERLBREW_ROOT = /home/jackal/perl5/perlbrew
PERLBREW_VERSION = 0.59
PERL_CR_SMOKER_CURRENT = git-deploy-6.01
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin/perl
$UID/$EUID = 500 / 500
$GID = 501 501
$EGID = 501 501
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.9800
CPAN::Meta 2.120630
Cwd 3.39_02
ExtUtils::CBuilder 0.280206
ExtUtils::Command 1.17
ExtUtils::Install 1.58
ExtUtils::MakeMaker 6.63_02
ExtUtils::Manifest 1.61
ExtUtils::ParseXS 3.16
File::Spec 3.39_02
JSON 2.53
JSON::PP 2.27200
Module::Build 0.4003
Module::Signature n/a
Parse::CPAN::Meta 1.4402
Test::Harness 3.23
Test::More 0.98
YAML 0.84
YAML::Syck 1.22
version 0.9901
--
Summary of my perl5 (revision 5 version 16 subversion 3) configuration:
Platform:
osname=linux, osvers=2.6.32-358.2.1.el6.i686, archname=i686-linux
uname='linux foobar 2.6.32-358.2.1.el6.i686 #1 smp tue mar 12 21:42:46 utc 2013 i686 i686 i386 gnulinux '
config_args='-de -Dprefix=/home/jackal/perl5/perlbrew/perls/perl-5.16.3 -Aeval:scriptdir=/home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.7 20120313 (Red Hat 4.4.7-3)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.12.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.12'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP PERL_PRESERVE_IVUV USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
Built under linux
Compiled at Apr 11 2013 21:56:53
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="19754"
PERL5_CPAN_IS_RUNNING="19754"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="1805,19754"
PERLBREW_BASHRC_VERSION="0.59"
PERLBREW_HOME="/home/jackal/.perlbrew"
PERLBREW_MANPATH="/home/jackal/perl5/perlbrew/perls/perl-5.16.3/man"
PERLBREW_PATH="/home/jackal/perl5/perlbrew/bin:/home/jackal/perl5/perlbrew/perls/perl-5.16.3/bin"
PERLBREW_PERL="perl-5.16.3"
PERLBREW_ROOT="/home/jackal/perl5/perlbrew"
PERLBREW_VERSION="0.59"
PERL_CR_SMOKER_CURRENT="git-deploy-6.01"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/jackal/perl5/perlbrew/perls/perl-5.16.3/lib/site_perl/5.16.3/i686-linux
/home/jackal/perl5/perlbrew/perls/perl-5.16.3/lib/site_perl/5.16.3
/home/jackal/perl5/perlbrew/perls/perl-5.16.3/lib/5.16.3/i686-linux
/home/jackal/perl5/perlbrew/perls/perl-5.16.3/lib/5.16.3
.