Back
From: metabase:user:30f0bd62-2aae-11df-837a-5e0a49663a4f
Subject: FAIL POE-Session-Cascading-1.04 v5.12.3 OpenBSD
Date: 2011-08-23T11:22:57Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear sungo,
This is a computer-generated report for POE-Session-Cascading-1.04
on perl 5.12.3, created by CPAN-Reporter-1.2002.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/sts/cpansmoke/perl-5.12.3/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" ./t/00-distribution.t ./t/_internals/creation.t ./t/_internals/invoke_state.t ./t/_internals/swap.t ./t/api/basic.t ./t/api/data_propogation.t ./t/multiplicity/dual.t
./t/00-distribution.t .......... skipped: Test::Distribution not found.
./t/_internals/creation.t ...... ok
./t/_internals/invoke_state.t .. ok
./t/_internals/swap.t .......... ok
# Failed test 'exception check'
# at ./t/api/basic.t line 21.
# got: 'Can't locate object method "_set_id" via package "POE::Session::Cascading" at /home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/lib/POE/Kernel.pm line 1407.
# '
# expected: ''
# Failed test 'whole tree propogation'
# at ./t/api/basic.t line 22.
# got: undef
# expected: '123456'
# Failed test 'exception check'
# at ./t/api/basic.t line 32.
# got: 'Can't locate object method "_set_id" via package "POE::Session::Cascading" at /home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/lib/POE/Kernel.pm line 1407.
# '
# expected: ''
# Failed test 'partial tree propogation (2-6)'
# at ./t/api/basic.t line 33.
# got: undef
# expected: '23456'
# Failed test 'exception check'
# at ./t/api/basic.t line 42.
# got: 'Can't locate object method "_set_id" via package "POE::Session::Cascading" at /home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/lib/POE/Kernel.pm line 1407.
# '
# expected: ''
# Failed test 'partial tree propogation (3-6)'
# at ./t/api/basic.t line 43.
# got: undef
# expected: '3456'
# Failed test 'exception check'
# at ./t/api/basic.t line 51.
# got: 'Can't locate object method "_set_id" via package "POE::Session::Cascading" at /home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/lib/POE/Kernel.pm line 1407.
# '
# expected: ''
# Failed test 'partial tree propogation (4-6)'
# at ./t/api/basic.t line 52.
# got: undef
# expected: '456'
# Failed test 'exception check'
# at ./t/api/basic.t line 61.
# got: 'Can't locate object method "_set_id" via package "POE::Session::Cascading" at /home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/lib/POE/Kernel.pm line 1407.
# '
# expected: ''
# Failed test 'partial tree propogation (5-6)'
# at ./t/api/basic.t line 62.
# got: undef
# expected: '56'
# Failed test 'exception check'
# at ./t/api/basic.t line 71.
# got: 'Can't locate object method "_set_id" via package "POE::Session::Cascading" at /home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/lib/POE/Kernel.pm line 1407.
# '
# expected: ''
# Failed test 'partial tree propogation (6-6)'
# at ./t/api/basic.t line 72.
# got: undef
# expected: '6'
# Failed test 'exception check'
# at ./t/api/basic.t line 81.
# got: 'Can't locate object method "_set_id" via package "POE::Session::Cascading" at /home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/lib/POE/Kernel.pm line 1407.
# '
# expected: ''
# Failed test 'single state propogation (7)'
# at ./t/api/basic.t line 82.
# got: undef
# expected: 'undef'
# Failed test 'exception check'
# at ./t/api/basic.t line 90.
# got: 'Can't locate object method "_set_id" via package "POE::Session::Cascading" at /home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/lib/POE/Kernel.pm line 1407.
# '
# expected: ''
# Failed test 'partial tree propogation (3-6)'
# at ./t/api/basic.t line 91.
# got: undef
# expected: '3456'
# Looks like you failed 16 tests of 17.
=== 1437 === Sessions were started, but POE::Kernel's run() method was never
called to execute them. This usually happens because an error
occurred before POE::Kernel->run() could be called. Please fix
any errors above this notice, and be sure that POE::Kernel->run()
is called. See documentation for POE::Kernel's run() method for
another way to disable this warning.
./t/api/basic.t ................
Dubious, test returned 16 (wstat 4096, 0x1000)
Failed 16/17 subtests
Can't locate object method "_set_id" via package "POE::Session::Cascading" at /home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/lib/POE/Kernel.pm line 1407.
# Looks like your test exited with 255 just after 1.
=== 18541 === Sessions were started, but POE::Kernel's run() method was never
called to execute them. This usually happens because an error
occurred before POE::Kernel->run() could be called. Please fix
any errors above this notice, and be sure that POE::Kernel->run()
is called. See documentation for POE::Kernel's run() method for
another way to disable this warning.
./t/api/data_propogation.t .....
Dubious, test returned 255 (wstat 65280, 0xff00)
All 1 subtests passed
Can't locate object method "_set_id" via package "POE::Session::Cascading" at /home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/lib/POE/Kernel.pm line 1407.
# Looks like you planned 15 tests but ran 1.
# Looks like your test exited with 255 just after 1.
=== 7100 === Sessions were started, but POE::Kernel's run() method was never
called to execute them. This usually happens because an error
occurred before POE::Kernel->run() could be called. Please fix
any errors above this notice, and be sure that POE::Kernel->run()
is called. See documentation for POE::Kernel's run() method for
another way to disable this warning.
./t/multiplicity/dual.t ........
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 14/15 subtests
Test Summary Report
-------------------
./t/api/basic.t (Wstat: 4096 Tests: 17 Failed: 16)
Failed tests: 2-17
Non-zero exit status: 16
./t/api/data_propogation.t (Wstat: 65280 Tests: 1 Failed: 0)
Non-zero exit status: 255
./t/multiplicity/dual.t (Wstat: 65280 Tests: 1 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 15 tests but ran 1.
Files=7, Tests=53, 2 wallclock secs ( 0.14 usr 0.12 sys + 1.51 cusr 0.40 csys = 2.17 CPU)
Result: FAIL
Failed 3/7 test programs. 16/53 subtests failed.
*** Error code 255
Stop in /home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-Session-Cascading-1.04-HhLJEV (line 761 of Makefile).
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- -----
Carp 0 1.17
ExtUtils::MakeMaker 6.59 6.59
POE 0.19 1.312
Test::More 0 0.98
build_requires:
Module Need Have
------------------- ---- -----
ExtUtils::MakeMaker 0 6.59
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/sts/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = /home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/arch:/home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/lib:/home/sts/cpansmoke/perl-5.12.3/cpan/build/IO-Tty-1.10-84vZbp/blib/arch:/home/sts/cpansmoke/perl-5.12.3/cpan/build/IO-Tty-1.10-84vZbp/blib/lib:/home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-Test-Loops-1.312-TtEXpF/blib/arch:/home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-Test-Loops-1.312-TtEXpF/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 28223
PERL5_CPAN_IS_RUNNING = 28223
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 13698,28223
PERL_CR_SMOKER_CURRENT = POE-Session-Cascading-1.04
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
TMPDIR = /home/sts/cpansmoke/tmp
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sts/cpansmoke/perl-5.12.3/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 10 10 0
$EGID = 10 10 0
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.9800
CPAN::Meta 2.112150
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.59
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.21
File::Spec 3.33
JSON 2.50
JSON::PP 2.27104
Module::Build 0.3800
Module::Signature n/a
Parse::CPAN::Meta 1.4401
Test::Harness 3.23
Test::More 0.98
YAML 0.73
YAML::Syck 1.17
version 0.88
--
Summary of my perl5 (revision 5 version 12 subversion 3) configuration:
Platform:
osname=openbsd, osvers=4.8, archname=OpenBSD.i386-openbsd-thread-multi
uname='openbsd cpansmoke5 4.8 generic.mp#359 i386 '
config_args='-des -Dusethreads -Dprefix=/home/sts/cpansmoke/perl-5.12.3'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 ', gccosandvers='openbsd4.8'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.56.0, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_ITHREADS
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under openbsd
Compiled at Feb 2 2011 22:53:41
%ENV:
PERL5LIB="/home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/arch:/home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/lib:/home/sts/cpansmoke/perl-5.12.3/cpan/build/IO-Tty-1.10-84vZbp/blib/arch:/home/sts/cpansmoke/perl-5.12.3/cpan/build/IO-Tty-1.10-84vZbp/blib/lib:/home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-Test-Loops-1.312-TtEXpF/blib/arch:/home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-Test-Loops-1.312-TtEXpF/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="28223"
PERL5_CPAN_IS_RUNNING="28223"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="13698,28223"
PERL_CR_SMOKER_CURRENT="POE-Session-Cascading-1.04"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/arch
/home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-1.312-OtxPkg/blib/lib
/home/sts/cpansmoke/perl-5.12.3/cpan/build/IO-Tty-1.10-84vZbp/blib/arch
/home/sts/cpansmoke/perl-5.12.3/cpan/build/IO-Tty-1.10-84vZbp/blib/lib
/home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-Test-Loops-1.312-TtEXpF/blib/arch
/home/sts/cpansmoke/perl-5.12.3/cpan/build/POE-Test-Loops-1.312-TtEXpF/blib/lib
/home/sts/cpansmoke/perl-5.12.3/lib/site_perl/5.12.3/OpenBSD.i386-openbsd-thread-multi
/home/sts/cpansmoke/perl-5.12.3/lib/site_perl/5.12.3
/home/sts/cpansmoke/perl-5.12.3/lib/5.12.3/OpenBSD.i386-openbsd-thread-multi
/home/sts/cpansmoke/perl-5.12.3/lib/5.12.3
.