Back
From: metabase:user:e3434da8-b236-11df-85ca-0247c6d74bde
Subject: UNKNOWN Tie-GHash-0.12 v5.10.1 GNU/Linux
Date: 2010-11-10T10:49:27Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Leon Brocard,
This is a computer-generated report for Tie-GHash-0.12
on perl 5.10.1, created by CPAN-Reporter-1.1803.
Thank you for uploading your work to CPAN. However, attempting to
test your distribution gave an inconclusive result.
This could be because your distribution had an error during the make/build
stage, did not define tests, tests could not be found, because your tests were
interrupted before they finished, or because the results of the tests could not
be parsed. You may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make':
cp GHash.pm blib/lib/Tie/GHash.pm
/usr/bin/perl -Mblib -MInline=NOISY,_INSTALL_ -MTie::GHash -e1 0.12 blib/arch
Starting Build Preprocess Stage
Finished Build Preprocess Stage
Starting Build Parse Stage
Finished Build Parse Stage
Starting Build Glue 1 Stage
Finished Build Glue 1 Stage
Starting Build Glue 2 Stage
Finished Build Glue 2 Stage
Starting Build Glue 3 Stage
Finished Build Glue 3 Stage
Starting Build Compile Stage
Starting "perl Makefile.PL" Stage
Unrecognized argument in LIBS ignored: 'INC'
Writing Makefile for Tie::GHash
Finished "perl Makefile.PL" Stage
Starting "make" Stage
make[1]: Entering directory `/home/ack/.cpan/build/Tie-GHash-0.12-kgEwPX/_Inline/build/Tie/GHash'
/usr/bin/perl /usr/local/share/perl/5.10.1/ExtUtils/xsubpp -typemap /usr/share/perl/5.10/ExtUtils/typemap GHash.xs > GHash.xsc && mv GHash.xsc GHash.c
cc -c -I/home/ack/.cpan/build/Tie-GHash-0.12-kgEwPX -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"0.12\" -DXS_VERSION=\"0.12\" -fPIC "-I/usr/lib/perl/5.10/CORE" GHash.c
GHash.xs:5:18: error: glib.h: No such file or directory
GHash.xs:8: error: expected specifier-qualifier-list before âGHashTableâ
GHash.xs: In function âTIEHASHâ:
GHash.xs:21: error: âTie_GHashâ has no member named âkeysâ
GHash.xs:22: error: âTie_GHashâ has no member named âhâ
GHash.xs:22: error: âg_str_hashâ undeclared (first use in this function)
GHash.xs:22: error: (Each undeclared identifier is reported only once
GHash.xs:22: error: for each function it appears in.)
GHash.xs:22: error: âg_str_equalâ undeclared (first use in this function)
GHash.xs: In function âSTOREâ:
GHash.xs:30: error: âGHashTableâ undeclared (first use in this function)
GHash.xs:30: error: âhâ undeclared (first use in this function)
GHash.xs:30: error: âTie_GHashâ has no member named âhâ
GHash.xs: In function âFETCHâ:
GHash.xs:44: error: âGHashTableâ undeclared (first use in this function)
GHash.xs:44: error: âhâ undeclared (first use in this function)
GHash.xs:44: error: âTie_GHashâ has no member named âhâ
GHash.xs: In function âEXISTSâ:
GHash.xs:49: error: âGHashTableâ undeclared (first use in this function)
GHash.xs:49: error: âhâ undeclared (first use in this function)
GHash.xs:49: error: âTie_GHashâ has no member named âhâ
GHash.xs: In function âsizeâ:
GHash.xs:54: error: âGHashTableâ undeclared (first use in this function)
GHash.xs:54: error: âhâ undeclared (first use in this function)
GHash.xs:54: error: âTie_GHashâ has no member named âhâ
GHash.xs: In function âDELETEâ:
GHash.xs:60: error: âGHashTableâ undeclared (first use in this function)
GHash.xs:60: error: âhâ undeclared (first use in this function)
GHash.xs:60: error: âTie_GHashâ has no member named âhâ
GHash.xs: At top level:
GHash.xs:70: error: expected â)â before âkeyâ
GHash.xs: In function âCLEARâ:
GHash.xs:76: error: âGHashTableâ undeclared (first use in this function)
GHash.xs:76: error: âhâ undeclared (first use in this function)
GHash.xs:76: error: âTie_GHashâ has no member named âhâ
GHash.xs:77: error: âfree_a_hash_table_entryâ undeclared (first use in this function)
GHash.xs: In function âDESTROYâ:
GHash.xs:83: error: âTie_GHashâ has no member named âhâ
GHash.xs:84: error: âTie_GHashâ has no member named âkeysâ
GHash.xs:84: error: âTie_GHashâ has no member named âkeysâ
GHash.xs: At top level:
GHash.xs:88: error: expected â)â before âkeyâ
GHash.xs: In function âNEXTKEYâ:
GHash.xs:97: error: âTie_GHashâ has no member named âkey_indexâ
GHash.xs:97: error: âTie_GHashâ has no member named ânkeysâ
GHash.xs:98: error: âTie_GHashâ has no member named âkeysâ
GHash.xs:99: error: âTie_GHashâ has no member named âkeysâ
GHash.xs:102: error: âTie_GHashâ has no member named âkeysâ
GHash.xs:102: error: âTie_GHashâ has no member named âkey_indexâ
GHash.xs: In function âFIRSTKEYâ:
GHash.xs:108: error: âTie_GHashâ has no member named âkeysâ
GHash.xs:108: error: âTie_GHashâ has no member named âkeysâ
GHash.xs:109: error: âTie_GHashâ has no member named ânkeysâ
GHash.xs:110: error: âTie_GHashâ has no member named âkeysâ
GHash.xs:110: error: âTie_GHashâ has no member named ânkeysâ
GHash.xs:111: error: âTie_GHashâ has no member named âkey_indexâ
GHash.xs:112: error: âTie_GHashâ has no member named âhâ
GHash.xs:112: error: âget_a_hash_keyâ undeclared (first use in this function)
GHash.xs:113: error: âTie_GHashâ has no member named âkey_indexâ
make[1]: *** [GHash.o] Error 1
make[1]: Leaving directory `/home/ack/.cpan/build/Tie-GHash-0.12-kgEwPX/_Inline/build/Tie/GHash'
A problem was encountered while attempting to compile and install your Inline
C code. The command that failed was:
make
The build directory was:
/home/ack/.cpan/build/Tie-GHash-0.12-kgEwPX/_Inline/build/Tie/GHash
To debug the problem, cd to the build directory, and inspect the output files.
at -e line 0
INIT failed--call queue aborted.
make: *** [GHash.inl] Error 25
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------ ---- ----
Inline 0.44 0.46
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.utf8
LANGUAGE =
PATH = /usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 20413
PERL5_CPAN_IS_EXECUTING = /home/ack/.cpan/build/Tie-GHash-0.12-kgEwPX/Makefile.PL
PERL5_CPAN_IS_RUNNING = 20413
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 4792,20413
PERL_CR_SMOKER_CURRENT = Tie-GHash-0.12
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /usr/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 20 24 25 29 30 44 46 100 103 111 113 114 1000
$EGID = 1000 20 24 25 29 30 44 46 100 103 111 113 114 1000
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.9402
Cwd 3.30
ExtUtils::CBuilder 0.2703
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.55_02
ExtUtils::Manifest 1.56
ExtUtils::ParseXS 2.2206
File::Spec 3.30
Module::Build 0.3607
Module::Signature n/a
Test::Harness 3.22
Test::More 0.96
YAML 0.72
YAML::Syck 1.15
version 0.77
--
Summary of my perl5 (revision 5 version 10 subversion 1) configuration:
Platform:
osname=linux, osvers=2.6.32.17-dsa-ia32, archname=i486-linux-gnu-thread-multi
uname='linux murphy 2.6.32.17-dsa-ia32 #1 smp tue aug 3 15:32:33 cest 2010 i686 gnulinux '
config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN -Dcccdlflags=-fPIC -Darchname=i486-linux-gnu -Dprefix=/usr -Dprivlib=/usr/share/perl/5.10 -Darchlib=/usr/lib/perl/5.10 -Dvendorprefix=/usr -Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib/perl5 -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl/5.10.1 -Dsitearch=/usr/local/lib/perl/5.10.1 -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Dsiteman3dir=/usr/local/man/man3 -Dman1ext=1 -Dman3ext=3perl -Dpager=/usr/bin/sensible-pager -Uafs -Ud_csh -Ud_ualarm -Uusesfio -Uusenm -DDEBUGGING=-g -Doptimize=-O2 -Duseshrplib -Dlibperl=libperl.so.5.10.1 -Dd_dosuid -des'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.5 20100728 (prerelease)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /usr/lib64
libs=-lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lcrypt
perllibs=-ldl -lm -lpthread -lc -lcrypt
libc=/lib/libc-2.11.2.so, so=so, useshrplib=true, libperl=libperl.so.5.10.1
gnulibc_version='2.11.2'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_ITHREADS
USE_LARGE_FILES USE_PERLIO USE_REENTRANT_API
Locally applied patches:
DEBPKG:debian/arm_thread_stress_timeout - http://bugs.debian.org/501970 Raise the timeout of ext/threads/shared/t/stress.t to accommodate slower build hosts
DEBPKG:debian/cpan_config_path - Set location of CPAN::Config to /etc/perl as /usr may not be writable.
DEBPKG:debian/cpan_definstalldirs - Provide a sensible INSTALLDIRS default for modules installed from CPAN.
DEBPKG:debian/db_file_ver - http://bugs.debian.org/340047 Remove overly restrictive DB_File version check.
DEBPKG:debian/doc_info - Replace generic man(1) instructions with Debian-specific information.
DEBPKG:debian/enc2xs_inc - http://bugs.debian.org/290336 Tweak enc2xs to follow symlinks and ignore missing @INC directories.
DEBPKG:debian/errno_ver - http://bugs.debian.org/343351 Remove Errno version check due to upgrade problems with long-running processes.
DEBPKG:debian/extutils_hacks - Various debian-specific ExtUtils changes
DEBPKG:debian/fakeroot - Postpone LD_LIBRARY_PATH evaluation to the binary targets.
DEBPKG:debian/instmodsh_doc - Debian policy doesn't install .packlist files for core or vendor.
DEBPKG:debian/ld_run_path - Remove standard libs from LD_RUN_PATH as per Debian policy.
DEBPKG:debian/libnet_config_path - Set location of libnet.cfg to /etc/perl/Net as /usr may not be writable.
DEBPKG:debian/m68k_thread_stress - http://bugs.debian.org/495826 Disable some threads tests on m68k for now due to missing TLS.
DEBPKG:debian/mod_paths - Tweak @INC ordering for Debian
DEBPKG:debian/module_build_man_extensions - http://bugs.debian.org/479460 Adjust Module::Build manual page extensions for the Debian Perl policy
DEBPKG:debian/perl_synopsis - http://bugs.debian.org/278323 Rearrange perl.pod
DEBPKG:debian/prune_libs - http://bugs.debian.org/128355 Prune the list of libraries wanted to what we actually need.
DEBPKG:debian/use_gdbm - Explicitly link against -lgdbm_compat in ODBM_File/NDBM_File.
DEBPKG:fixes/assorted_docs - http://bugs.debian.org/443733 [384f06a] Math::BigInt::CalcEmu documentation grammar fix
DEBPKG:fixes/net_smtp_docs - http://bugs.debian.org/100195 [rt.cpan.org #36038] Document the Net::SMTP 'Port' option
DEBPKG:fixes/processPL - http://bugs.debian.org/357264 [rt.cpan.org #17224] Always use PERLRUNINST when building perl modules.
DEBPKG:debian/perlivp - http://bugs.debian.org/510895 Make perlivp skip include directories in /usr/local
DEBPKG:fixes/pod2man-index-backslash - http://bugs.debian.org/521256 Escape backslashes in .IX entries
DEBPKG:debian/disable-zlib-bundling - Disable zlib bundling in Compress::Raw::Zlib
DEBPKG:fixes/kfreebsd_cppsymbols - http://bugs.debian.org/533098 [3b910a0] Add gcc predefined macros to $Config{cppsymbols} on GNU/kFreeBSD.
DEBPKG:debian/cpanplus_definstalldirs - http://bugs.debian.org/533707 Configure CPANPLUS to use the site directories by default.
DEBPKG:debian/cpanplus_config_path - Save local versions of CPANPLUS::Config::System into /etc/perl.
DEBPKG:fixes/kfreebsd-filecopy-pipes - http://bugs.debian.org/537555 [16f708c] Fix File::Copy::copy with pipes on GNU/kFreeBSD
DEBPKG:fixes/anon-tmpfile-dir - http://bugs.debian.org/528544 [perl #66452] Honor TMPDIR when open()ing an anonymous temporary file
DEBPKG:fixes/abstract-sockets - http://bugs.debian.org/329291 [89904c0] Add support for Abstract namespace sockets.
DEBPKG:fixes/hurd_cppsymbols - http://bugs.debian.org/544307 [eeb92b7] Add gcc predefined macros to $Config{cppsymbols} on GNU/Hurd.
DEBPKG:fixes/autodie-flock - http://bugs.debian.org/543731 Allow for flock returning EAGAIN instead of EWOULDBLOCK on linux/parisc
DEBPKG:fixes/archive-tar-instance-error - http://bugs.debian.org/539355 [rt.cpan.org #48879] Separate Archive::Tar instance error strings from each other
DEBPKG:fixes/positive-gpos - http://bugs.debian.org/545234 [perl #69056] [c584a96] Fix \G crash on first match
DEBPKG:debian/devel-ppport-ia64-optim - http://bugs.debian.org/548943 Work around an ICE on ia64
DEBPKG:fixes/trie-logic-match - http://bugs.debian.org/552291 [perl #69973] [0abd0d7] Fix a DoS in Unicode processing [CVE-2009-3626]
DEBPKG:fixes/hppa-thread-eagain - http://bugs.debian.org/554218 make the threads-shared test suite more robust, fixing failures on hppa
DEBPKG:fixes/crash-on-undefined-destroy - http://bugs.debian.org/564074 [perl #71952] [1f15e67] Fix a NULL pointer dereference when looking for a DESTROY method
DEBPKG:fixes/tainted-errno - http://bugs.debian.org/574129 [perl #61976] [be1cf43] fix an errno stringification bug in taint mode
DEBPKG:fixes/safe-upgrade - http://bugs.debian.org/582978 Upgrade Safe.pm to 2.25, fixing CVE-2010-1974
DEBPKG:fixes/tell-crash - http://bugs.debian.org/578577 [f4817f3] Fix a tell() crash on bad arguments.
DEBPKG:fixes/format-write-crash - http://bugs.debian.org/579537 [perl #22977] [421f30e] Fix a crash in format/write
DEBPKG:fixes/arm-alignment - http://bugs.debian.org/289884 [f1c7503] Prevent gcc from optimizing the alignment test away on armel
DEBPKG:fixes/fcgi-test - Fix a failure in CGI/t/fast.t when FCGI is installed
DEBPKG:fixes/hurd-ccflags - http://bugs.debian.org/587901 Make hints/gnu.sh append to $ccflags rather than overriding them
DEBPKG:patchlevel - http://bugs.debian.org/567489 List packaged patches for 5.10.1-14 in patchlevel.h
Built under linux
Compiled at Aug 6 2010 10:27:54
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="20413"
PERL5_CPAN_IS_EXECUTING="/home/ack/.cpan/build/Tie-GHash-0.12-kgEwPX/Makefile.PL"
PERL5_CPAN_IS_RUNNING="20413"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="4792,20413"
PERL_CR_SMOKER_CURRENT="Tie-GHash-0.12"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/etc/perl
/usr/local/lib/perl/5.10.1
/usr/local/share/perl/5.10.1
/usr/lib/perl5
/usr/share/perl5
/usr/lib/perl/5.10
/usr/share/perl/5.10
/usr/local/lib/site_perl
.