ebXML-Message v0.03 Perl 5 v5.8.9 i386-freebsd
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
ebXML-Message v0.03
- Platform
- Perl 5 v5.8.9 i386-freebsd
- Date
- 2010-04-16 07:17:31
- ID
- 1eed142e-4928-11df-9759-eb5590befd91
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear TEEJAY,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9003. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Apr 16 08:17:28 2010] Using cached file '/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/authors/id/T/TE/TEEJAY/CHECKSUMS' on disk; ttl (3600s) is not exceeded
[MSG] [Fri Apr 16 08:17:28 2010] Checksum matches for 'ebXML-Message-0.03.tar.gz'
[MSG] [Fri Apr 16 08:17:29 2010] Extracted 'ebXML::Message' to '/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ebXML-Message-0.03'
[MSG] [Fri Apr 16 08:17:29 2010] CPANPLUS is prefering Build.PL
[MSG] [Fri Apr 16 08:17:29 2010] Loading YACSmoke database "/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/cpansmoke.dat"
[MSG] [Fri Apr 16 08:17:29 2010] Checking if your kit is complete...
Looks good
Writing Makefile for ebXML::Message
[MSG] [Fri Apr 16 08:17:29 2010] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Apr 16 08:17:29 2010] Checking for previous PASS result for "ebXML-Message-0.03"
[MSG] [Fri Apr 16 08:17:30 2010] cp lib/ebXML/Message.pm blib/lib/ebXML/Message.pm
cp lib/ebXML/Message/SOAPWriter.pm blib/lib/ebXML/Message/SOAPWriter.pm
cp lib/ebXML/Message/DOMReader.pm blib/lib/ebXML/Message/DOMReader.pm
cp lib/ebXML/Message/DOMWriter.pm blib/lib/ebXML/Message/DOMWriter.pm
cp lib/ebXML/Message/Service.pm blib/lib/ebXML/Message/Service.pm
cp lib/ebXML/Message/Reference.pm blib/lib/ebXML/Message/Reference.pm
Manifying blib/man3/ebXML::Message.3
[ERROR] [Fri Apr 16 08:17:30 2010] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/home/cpan/pit/bare/perl-5.8.9/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use ebXML::Message;'
# at t/ebXML-Message.t line 9.
# Tried to use 'ebXML::Message'.
# Error: Base class package "Class::Tangram" is empty.
# (Perhaps you need to 'use' the module which defines that package first,
# or make that module available in @INC (@INC contains: /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ebXML-Message-0.03/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ebXML-Message-0.03/blib/arch /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ebXML-Message-0.03/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ebXML-Message-0.03/blib/arch /usr/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9/i386-freebsd /usr/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9 /usr/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/i386-freebsd /usr/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9 .).
# at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ebXML-Message-0.03/blib/lib/ebXML/Message.pm line 67
# BEGIN failed--compilation aborted at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ebXML-Message-0.03/blib/lib/ebXML/Message.pm line 67.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
# Looks like you failed 1 test of 1.
t/ebXML-Message.t ..
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
Test Summary Report
-------------------
t/ebXML-Message.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=1, Tests=1, 0 wallclock secs ( 0.05 usr 0.00 sys + 0.04 cusr 0.02 csys = 0.10 CPU)
Result: FAIL
Failed 1/1 test programs. 1/1 subtests failed.
*** Error code 1
Stop in /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ebXML-Message-0.03.
[MSG] [Fri Apr 16 08:17:30 2010] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9003
CPANPLUS::Dist::Build 0.46
Cwd 3.30
ExtUtils::CBuilder 0.2703
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.56
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2205
File::Spec 3.30
Module::Build 0.3607
Test::Harness 3.21
Test::More 0.94
version 0.80
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.54.
Powered by minismokebox version 0.26
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ebXML-Message-0.03/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ebXML-Message-0.03/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 81216
PERL5_CPANPLUS_IS_VERSION = 0.9003
PERL5_MINISMOKEBOX = 0.26
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.8.9/
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.8.9/bin/perl
UID: $< = 1003
EUID: $> = 1003
GID: $( = 1003 1003 1003
EGID: $) = 1003 1003 1003
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=freebsd, osvers=7.2-release, archname=i386-freebsd
uname='freebsd wintermute.staffordshire.gov.uk 7.2-release freebsd 7.2-release #0: fri may 1 08:49:13 utc 2009 root@walker.cse.buffalo.edu:usrobjusrsrcsysgeneric i386 '
config_args='-de -Dprefix=/usr/home/cpan/pit/bare/perl-5.8.9'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 [FreeBSD]', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_FAST_STDIO USE_LARGE_FILES
USE_PERLIO
Built under freebsd
Compiled at Oct 9 2009 23:44:35
%ENV:
PERL5LIB=":/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ebXML-Message-0.03/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ebXML-Message-0.03/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="81216"
PERL5_CPANPLUS_IS_VERSION="0.9003"
PERL5_MINISMOKEBOX="0.26"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.8.9/"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ebXML-Message-0.03/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ebXML-Message-0.03/blib/arch
/usr/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9/i386-freebsd
/usr/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9
/usr/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/i386-freebsd
/usr/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9
.