Text-Substitute v0.01 Perl 5 v5.8.9 amd64-netbsd
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Text-Substitute v0.01
- Platform
- Perl 5 v5.8.9 amd64-netbsd
- Date
- 2018-10-23 02:19:49
- ID
- 1e5635c6-d66a-11e8-86e3-404589cf513b
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear JV,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9174. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare/perl-5.8.9/bin/perl5.8.9" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Unicode character 0xfdd0 is illegal at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib/Text/Substitute.pm line 103.
Unicode character 0xfdd1 is illegal at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib/Text/Substitute.pm line 104.
Unicode character 0xfdd2 is illegal at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib/Text/Substitute.pm line 105.
Unicode character 0xfdd3 is illegal at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib/Text/Substitute.pm line 106.
Unicode character 0xfdd4 is illegal at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib/Text/Substitute.pm line 109.
Unicode character 0xfdd5 is illegal at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib/Text/Substitute.pm line 110.
t/00-load.t ....
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
# Failed test 'use Text::Substitute;'
# at t/00-load.t line 6.
# Tried to use 'Text::Substitute'.
# Error: Sequence (?<k...) not recognized in regex; marked by <-- HERE in m/ ( \x{fdd5}
# (?<k <-- HERE ey>\w+[-_\w.]*)
# (?: (?<op> = )
# (?<test> [^|}\x{fdd5}]*) )?
# (?: \| (?<then> [^|}\x{fdd5}]* )
# (?: \| (?<else> [^|}\x{fdd5}]* ) )?
# )?
# \}
# )
# / at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib/Text/Substitute.pm line 123.
# Compilation failed in require at t/00-load.t line 6.
# BEGIN failed--compilation aborted at t/00-load.t line 6.
# Testing Text::Substitute , Perl 5.008009, /home/cpan/pit/bare/perl-5.8.9/bin/perl5.8.9
# Looks like you failed 1 test of 1.
Unicode character 0xfdd0 is illegal at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib/Text/Substitute.pm line 103.
Unicode character 0xfdd1 is illegal at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib/Text/Substitute.pm line 104.
Unicode character 0xfdd2 is illegal at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib/Text/Substitute.pm line 105.
Unicode character 0xfdd3 is illegal at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib/Text/Substitute.pm line 106.
Unicode character 0xfdd4 is illegal at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib/Text/Substitute.pm line 109.
Unicode character 0xfdd5 is illegal at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib/Text/Substitute.pm line 110.
# Failed test 'use Text::Substitute;'
# at t/10-basic.t line 11.
# Tried to use 'Text::Substitute'.
# Error: Sequence (?<k...) not recognized in regex; marked by <-- HERE in m/ ( \x{fdd5}
# (?<k <-- HERE ey>\w+[-_\w.]*)
# (?: (?<op> = )
# (?<test> [^|}\x{fdd5}]*) )?
# (?: \| (?<then> [^|}\x{fdd5}]* )
# (?: \| (?<else> [^|}\x{fdd5}]* ) )?
# )?
# \}
# )
# / at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib/Text/Substitute.pm line 123.
# Compilation failed in require at t/10-basic.t line 11.
# BEGIN failed--compilation aborted at t/10-basic.t line 11.
Bailout called. Further testing stopped: 10-basic.dat [No such file or directory]
*** Error code 255
Stop.
make: stopped in /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01
FAILED--Further testing stopped: 10-basic.dat [No such file or directory]
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.34 0
Test::More 1.302136 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9174
CPANPLUS::Dist::Build 0.88
Cwd 3.74
ExtUtils::CBuilder 0.280230
ExtUtils::Command 7.34
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.34
ExtUtils::Manifest 1.71
ExtUtils::ParseXS 3.35
File::Spec 3.74
Module::Build 0.4224
Pod::Parser 1.35
Pod::Simple 3.28
Test2 1.302136
Test::Harness 3.42
Test::More 1.302136
version 0.9924
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.02.
Powered by minismokebox version 0.68
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 28404
PERL5_CPANPLUS_IS_VERSION = 0.9174
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.8.9
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.8.9/bin/perl5.8.9
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=netbsd, osvers=6.1.4, archname=amd64-netbsd
uname='netbsd naboo.bingosnet.co.uk 6.1.4 netbsd 6.1.4 (generic) amd64 '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.8.9'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include'
ccversion='', gccversion='4.5.3', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix
perllibs=-lm -lcrypt -lutil -lc -lposix
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_FAST_STDIO USE_LARGE_FILES USE_PERLIO
Built under netbsd
Compiled at May 9 2014 12:12:26
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="28404"
PERL5_CPANPLUS_IS_VERSION="0.9174"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.8.9"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/_I2PJU1mTz/Text-Substitute-0.01/blib/arch
/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9/amd64-netbsd
/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9
/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/amd64-netbsd
/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9
.