Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL App-PFT-v1.3.0 5.31.1 GNU/Linux
Date: 2019-07-20T12:07:43Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Giovanni Simoni,
This is a computer-generated report for App-PFT-v1.3.0
on perl 5.31.1, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
Skip blib/lib/auto/share/module/App-PFT/templates/terminal.html (unchanged)
Skip blib/lib/auto/share/module/App-PFT/templates/dump_page.html (unchanged)
Skip blib/lib/auto/share/module/App-PFT/templates/minimal.html (unchanged)
Skip blib/lib/auto/share/module/App-PFT/templates/default.html (unchanged)
PERL_DL_NONLAZY=1 "/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.31.1/fc43/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/bin/pft --version says:
# Can't locate PFT.pm in @INC (you may need to install the PFT module) (@INC contains: /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/lib /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/arch /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.26.2 /usr/local/share/perl/5.26.2 /usr/lib/x86_64-linux-gnu/perl5/5.26 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.26 /usr/share/perl/5.26 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base .) at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/lib/App/PFT.pm line 22.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/lib/App/PFT.pm line 22.
# Compilation failed in require at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/bin/pft line 144.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/bin/pft line 144.
Can't locate PFT/Conf.pm in @INC (you may need to install the PFT::Conf module) (@INC contains: /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/lib /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/arch /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.26.2 /usr/local/share/perl/5.26.2 /usr/lib/x86_64-linux-gnu/perl5/5.26 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.26 /usr/share/perl/5.26 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base .) at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/bin/pft-init line 54.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/bin/pft-init line 54.
# Failed test 'Could construct'
# at t/base_site.t line 24.
# Failed test 'Edit command 1 successful'
# at t/base_site.t line 31.
# Failed test 'Edit command 1 is silent (out=, err=Can't locate PFT.pm in @INC (you may need to install the PFT module) (@INC contains: /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/lib /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/arch /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.26.2 /usr/local/share/perl/5.26.2 /usr/lib/x86_64-linux-gnu/perl5/5.26 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.26 /usr/share/perl/5.26 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base .) at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/lib/App/PFT.pm line 22.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/lib/App/PFT.pm line 22.
# Compilation failed in require at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/bin/pft-edit line 495.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/bin/pft-edit line 495.
# )'
# at t/base_site.t line 32.
# Failed test 'Edit command 2 successful'
# at t/base_site.t line 39.
# Failed test 'Edit command 2 is silent (out=, err=Can't locate PFT.pm in @INC (you may need to install the PFT module) (@INC contains: /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/lib /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/arch /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.26.2 /usr/local/share/perl/5.26.2 /usr/lib/x86_64-linux-gnu/perl5/5.26 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.26 /usr/share/perl/5.26 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base .) at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/lib/App/PFT.pm line 22.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/lib/App/PFT.pm line 22.
# Compilation failed in require at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/bin/pft-edit line 495.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/bin/pft-edit line 495.
# )'
# at t/base_site.t line 40.
# Failed test 'Correct reference'
# at t/base_site.t line 49.
# Failed test 'Explicative error message'
# at t/base_site.t line 54.
# got: 'BEGIN failed--compilation aborted at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/bin/pft-make line 125.
# '
# expected: '- link: PFT::Text::Symbol[key:"page", args:["welcome"], start:49, len:13]
# reason: No matching item
# '
# Looks like you failed 2 tests of 2.
# Failed test 'Explicative error message'
# at t/base_site.t line 58.
# Failed test 'Compilation works after link was fixed'
# at t/base_site.t line 67.
# Failed test 'Compilation command is silent (out=, err=Can't locate Template/Alloy.pm in @INC (you may need to install the Template::Alloy module) (@INC contains: /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/lib /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/blib/arch /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.26.2 /usr/local/share/perl/5.26.2 /usr/lib/x86_64-linux-gnu/perl5/5.26 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.26 /usr/share/perl/5.26 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base .) at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/bin/pft-make line 125.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-1051-O9sU3b/App-PFT-v1.3.0-0/bin/pft-make line 125.
# )'
# at t/base_site.t line 68.
# Looks like you failed 8 tests of 9.
t/base_site.t ......
Dubious, test returned 8 (wstat 2048, 0x800)
Failed 8/9 subtests
# Failed test 'Site constructed'
# at t/editing_cases.t line 22.
# Failed test 'File exists ()'
# at t/editing_cases.t line 35.
# No tests run!
# Failed test 'No tests run for subtest "breaking header"'
# at t/editing_cases.t line 48.
No such file or directory at t/editing_cases.t line 39.
# Looks like your test exited with 2 just after 3.
t/editing_cases.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 4/4 subtests
Test Summary Report
-------------------
t/base_site.t (Wstat: 2048 Tests: 9 Failed: 8)
Failed tests: 1-5, 7-9
Non-zero exit status: 8
t/editing_cases.t (Wstat: 512 Tests: 3 Failed: 3)
Failed tests: 1-3
Non-zero exit status: 2
Parse errors: Bad plan. You planned 4 tests but ran 3.
Files=2, Tests=12, 4 wallclock secs ( 0.03 usr 0.02 sys + 0.32 cusr 0.19 csys = 0.56 CPU)
Result: FAIL
Failed 2/2 test programs. 11/12 subtests failed.
make: *** [Makefile:999: test_dynamic] Error 2
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
----------------------- ------ ----------
Carp 0 1.50
Cwd 0 3.78
Digest::MD5 0 2.55
Encode 0 3.01
Encode::Locale 0 1.05
Exporter 0 5.73
File::Basename 0 2.85
File::Copy 0 2.34
File::Copy::Recursive 0 0.44
File::Path 0 2.16
File::ShareDir 0 1.116
File::Spec 0 3.78
File::Spec::Functions 0 3.78
FindBin 0 1.51
Getopt::Long 0 2.5
HTML::Escape 0 1.10
LWP::Simple 0 6.39
perl 5.006 5.031001
PFT v1.2.1 v1.3.0
Pod::Find 0 1.63
Pod::Usage 0 1.69
Template::Alloy 0 1.020
URI 0 1.76
build_requires:
Module Need Have
----------------------- ------ ----------
Cwd 0 3.78
ExtUtils::MakeMaker 0 7.37_02
File::Temp 0 0.2309
IPC::Run 0 20180523.0
PFT v1.2.1 v1.3.0
Test::More 0 1.302164
configure_requires:
Module Need Have
----------------------- ------ ----------
ExtUtils::MakeMaker 0 7.37_02
File::ShareDir::Install 0 0.13
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 1073
PERL5_CPAN_IS_RUNNING = 1073
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.31.1/fc43/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.27
CPAN::Meta 2.150010
Cwd 3.78
ExtUtils::CBuilder 0.280232
ExtUtils::Command 7.37_02
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.37_02
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.40
File::Spec 3.78
JSON 4.02
JSON::PP 4.04
Module::Build 0.4229
Module::Signature 0.83
Parse::CPAN::Meta 2.150010
Test::Harness 3.42
Test::More 1.302164
YAML 1.29
YAML::Syck 1.31
version 0.9924
--
Summary of my perl5 (revision 5 version 31 subversion 1) configuration:
Commit id: 287636082155028adce267d8e660aedeea514897
Platform:
osname=linux
osvers=4.18.0-2-amd64
archname=x86_64-linux-ld
uname='linux k93msid 4.18.0-2-amd64 #1 smp debian 4.18.10-2 (2018-10-07) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.31.1/fc43 -Dmyhostname=k93msid -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Uuseithreads -Duselongdouble -DEBUGGING=both'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=undef
use64bitint=define
use64bitall=define
uselongdouble=define
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2'
optimize='-O2 -g'
cppflags='-fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='8.2.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='long double'
nvsize=16
Off_t='off_t'
lseeksize=8
alignbytes=16
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/8/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.27.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.27'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
DEBUGGING
HAS_TIMES
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
PERL_USE_DEVEL
USE_64_BIT_ALL
USE_64_BIT_INT
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_LONG_DOUBLE
USE_PERLIO
USE_PERL_ATOF
Built under linux
Compiled at Jun 21 2019 05:22:51
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="1073"
PERL5_CPAN_IS_RUNNING="1073"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.31.1/fc43/lib/site_perl/5.31.1/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.31.1/fc43/lib/site_perl/5.31.1
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.31.1/fc43/lib/5.31.1/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.31.1/fc43/lib/5.31.1
.